TinyPilot

Being able to set a static IP address or switch to DHCP via TinyPilot's web browser UI. Can't believe this was not thought of. I know it can be done via command line but, come on guys, how hard would it be to add it to the UI? TinyPilot's inability t...

Hi, I just purchased the TinyPiloy Voyager 2a (non-PoE version) and I want to somehow use it with my 4-port Tesmart KVM switch so I can have KVM access to multiple PCs that are connected to the Tesmart KVM. I read a few posts on how this can be done ...

Hi, I just upgraded to 2.6.0 and now I'm having video issues that I wasn't before. It was working like 2 versions back (2.5.0?) and I had some issues going to the next level (2.5.5) so I went ahead and moved to 2.6.0 by doing a new 2.6.0 flash. Now t...

I'm trying to move to an ultra portable tinypilot setup, currently using a pi4b with a USB HDMI capture adapter, and a USB C-to-A adapter cable to connect my modified USB cable for kb/mouse input to the connected computer. It all works great. I snagg...

I have a brand new TinyPilot. I cannot access it via Ethernet. There are no activity lights on the tinypilot or the router when I connect it to my router. I am using a cable that works with other devices. Also, there is a bright blinking red light an...

Can't update to version 2.5.4 from 2.5.0 1.- Did ++++++++ $ sudo apt-get update --allow-releaseinfo-change Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Reading package li...

My work laptop is located in my house and I would like to travel out of the state without carrying a work laptop. But my office networking guys always monitor my location by checking my IP address and I cant use Team viewers or RDP or VPN routers to ...

Getting the following error message when trying to do the update The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2. https://logs.tinypilotkvm.com/BWRW5sg0

What would be reasons to upgrade from a working V2 to the V2a? I have the V2 for a few years without any real issues and was wondering whether the new version is significant enough to upgrade to. I didn't see anything that jumped out (other than the ...

I'm having issues with the Tinypilot 2a when connected to a Dell PowerEdge R730 Server. It has some misalignment issues in BIOS and setup, but when the TrueNAS Scale OS is running its completely unreadble. Here is what I am seeing

Hi. I bought two identical laptops and wanted to use Tiny Pilot to set them up remotely. The first one worked just fine, but the second one never gets past "No signal". The setup uses the same cables (HDMI, USB, no adapters). When I connect HDMI to a...

Hi, I need to remote control one desktop. Problem is that on laptop I have an application protected by one dongle which I want to use, but this application detect if you are trying to connect to my desktop with TeamViewer, Anydesk, RDP...etc and if t...

I upgraded tinypilot from version 2.5.3 to 2.5.4 These are steps what I did: re-flashed sd card with image file inserted card to tinypilot device and power it on After 3 mins, connected tinypilot device to laptop The first time, I could see sold red ...

Hi, Things were working fine for the last 10+ days since I got the device. Today I powered down so I could move around the cabling. When I powered it back up I couldn't connect using the browser. I get a connection refused error. I can connect via SS...

Suppose I shut down my target computer. I wonder if there is a way to turn it on using the TinyPilot web interface? Thank you.

Just sharing some tweaking I've been doing with my TinyPilot stuff, with the hope it might help others. For context, I'm primarily a Windows user and not a Linux/Python/Ansible/Bash person, but I own a couple of Pis to learn on. I can usually read so...

I have tried two different .iso images Ubuntu and AlmaLinux on SuperMicro hardware for testing once the boot to .iso is initiated from server's boot menu and the option selected to Install Ubuntu/AlmaLinux the video goes to NO SIGNAL mode. Here is lo...

I don't see this kind of support mentioned anywhere it this something already supported?

Riding on the existing tips page: https://tinypilotkvm.com/faq/reduce-bandwidth How do you measure your current speed or quality of connection? What are some tips on improving the connection quality? For example: a) I already turned my video to H254....

Hi, Using the TinyPilot but wanted some power control for one of my servers (it doesnt have IPMI unfortunately, its a consumer motherboard) so I thought I would have a dabble and I didnt really want to go all out and start wiring up relays to GPIOs e...

I have been working with the TinyPilot Voyager versions 1 & 2 and have found both work perfectly with MT-VIKI 4-port KVM. Using my physical keyboard or the TinyPilot on-screen keyboard I am able to use the Home-Home-number keys combination to switch ...

Hola, quisiera saber sobre el tema de facturación solo se emite INVOICE? y el metodo de pago solo es mediante tarjetas? Gracias

Hi Support, I'm running into an issue with the VGA adapter, on my test Dell system I'm unable to get the TinyPilot to display when using the VGA adapter at the default resolution the computer attempts to output over VGA (1920 x 1080 60Hz). When I wen...

All of a sudden my tiny pilot stopped working and and getting and error tinypilot took too long to respond.

Did a search and didn't find an answer. Sorry if this has been asked before. Just got my device. Haven't hooked it up yet. Was wondering what the four USB-A ports are used for? Looks like two USB3 and two USB2 ports near the network connector. Can I ...

Hi, what is the best way to use existing python scripts available on TinyPilot to import typing onto another python script for automation purpose? Just for a simple example, if I want to set keystrokes of a phrase sent to keyboard every day at 8am, h...

All of sudden tinypilot hanged, after restart I am getting 502 Bad Gateway error. Now as recommended I am trying to factory reset but getting downloaded image file is corrupt. Image Downloaded from https://tinypilotkvm.com/pro/license-check. Flashing...

I'm trying to update my tinypilot to version 2.6 but i need to do it manually. When I go to the image download page, it wants my order number. I can't find it. How do i download an image without the order number?

In your "Update to the new EDID" release notes, you show that "TinyPilot" is now set as the device's display name. How can I return the previous device name back to "Toshiba-H2C" on a TinyPilot Voyager 2a?

All of a sudden I couldn't access my Tinypilot via the web interface. Looking at my switch I'm seeing its not pulling an IP address either. When I looked a the device, the green light is flashing 7 times, stops, then repeats that 7 flashes over and o...

I have the TinyPilot Hobbyist, which I dearly adore and use regularly. However, video quality (red, in particular, which I know is an HDMI encoding thing) and audio are issues, which I see the new CSI HDMI adapters support now, and your software now ...

I've recently updated tiny pilot and soon after that its getting alot of connectivity issues, how can I revert recent updates

Update returned with a failure, then got the nginx gateway error. Logged in via ssh, verified what services were involved, tinypilot failed with flask error. Is there a method to re install from a script when in this state??

Hi! I have a C790 CSI card (Geekworm) to add to my TinyPilot Hobbyist. It worked great initially, but now the colors are all wrong -- specifically, it appears that blue and red are reversed. I've tried unplugging the HDMI cable from my laptop (the so...

Hello, My keyboard works great but my mouse doesn't work through the web browser connected to a Mac Mini G4 running OS 9.2. The same mouse does work if I hook it up directly to the Mac Mini. Any ideas that might be able to help? Thank you, Chuck

Is this a known issue with the newer Dell bios and TinyPilot where the mouse isn't usable? The keyboard works fine, but mouse doesn't.

I I'm not having a problem I just ordered the tiny pilot and I love it but I do need the $15 cord that is advertised I'm trying to order it by itself but it won't allow me to it's adding the another tiny pilot to it I just need to $15 cord how do I g...

This topic exists and there is no solution? Dec 10 16:30:46 tinypilot1 systemd[1]: Started TinyPilot - RPi-based virtual KVM. Dec 10 16:30:47 tinypilot1 python[976]: [2021-12-10 16:30:47,453] INFO in main: Starting app Dec 10 16:30:47 tinypilot1 pyth...

Be nice to tuck this thing on an accessory shelf.