TinyPilot

I upgraded to the TinyPilot OS 2.5.3 to use h.264 video and it works fairly well (quicker and more responsive than MJPEG). I have a question on the h.264 settings, though. For the "quality" slider (which affects Mbps) would lowering this: a) cause hi...

My tinypilot 2's data port is no longer working. I have tried everything I could think of. I switched wires to wires that work on my other tinypilots (I have 3 others). Cross tested the laptops with the other tinypilots and they seem to work. The vid...

Looking to get a VOIP phone's RJ11 output (usually used for a headset) to transmit over IP as well. Has anyone got this functionality working?

is there a way to remove that banner, and any tinypilot identifying information, or not?

@michael wondering if you've tested the AIMOS KVM w/ powered splitter (as mentioned here: Newbie Problems / Questions #post-4) against the 2a. I have it setup as diagrammed, using the same splitter, and despite everything being powered up fine, I can...

I ordered the 'TinyPilot Voyager 2a' equipment on March 8. But it was canceled after 8 hours and I got a refund for the payment. Not sure what the issue is. I need help to place an order again and get the equipment asap by this week. It's really impo...

Hi, I've ordered a Voyager 2a PoE and given that it's powered via the ethernet port, would it be possible to configure the USB-C port labelled "Power" as an additional USB device? I'm specifically interested in the idea of using a KVM with separate K...

Hello, I was accessing Voyager 2 tiny pilot remotely and was having an extreme lag issue, despite a solid internet connection at both locations. I restarted my tiny pilot and was no longer able to connect. Now that I am back on site I am trying to co...

I have been using tinypilot for 3 months and it was working perfectly good. But I got a new router and not i am not able to connect to the tinypilot anymore do i need to reset something? Also if i connect my old router back it starts working again.

Didn’t use my TinyPilot for several months. Trying to reset my password, I discovered that license expired 2 days ago. And I have to pay $79/- to renew or $400/- Tinypilot will go useless. Can you please give me link to download my original image (th...

Unable to view video after tinypilot update

I know Tinypilot supports waking other devices via wake on lan, but can the tinypilot itself be started with Wake on LAN? If you shutdown the Tinypilot via the web interface, is there another way to wake it up remotely?

I attempted to update my Tinypilot software on my voyager and after the update I'm not longer getting any video on the GUI. I can see the onscreen keyboard but the "display" is just a little error icon. When I mouse over it my cursor changes into the...

Version: 2.5.3 Video: H.264 My very first attempt at connecting to a device and I can do nothing other than view the initial boot screen. The target device is a factory reset 2011 Mac Mini. The mouse and keyboard do not work. Looking into the Develop...

Hi, Love my TP, but really need audio support. Is there an upgrade path from 2 to 2a? Maybe a trade-in or discount? Is there some hardware I can purchase to enable audio over HDMI? Just got my TP a few months ago and hate to have to buy a whole new u...

Copy/paste back and forth Copy/paste of images and other media that normally would work Sound transmission (for teams etc.) Remote CAC control (can I use the CAC on my remote computer to validate my head computer browser?) Mobile phone mouse press/be...

Hi all, here is my log: https://logs.tinypilotkvm.com/ehq4iRwc https://imgur.com/a/WfPDleF desktop: connected to my Computer #1 tinypilot: connected to my Computer #2 I'm trying to use Computer #1 to control Computer #2. Issue: still seeing "no signa...

Just purchased the Voyager 2A for my work Mac but on login screen from shutdown or restart the keyboard and mouse are not working. I see previous threads on this but no updates. Is there a workaround for this?

I have a new tinypilot that is upgraded to 2.5.3 and I am unable to hear audio from my device. How does it work?

im trying to see whether wireguard is more tolerable than my current tailscale setup i have the tinypilot connected to to a glinet mt3000 that has wireguard setup. technically that should be the setup. can access mt3000 but i cannot access tinypilot ...

We have more than one TinyPilot Voyager 2 and would like to use them at the same time in our private network. How can we change the DHCP client ID on at least one of these so they don't clash with each other when requesting a DNHP IP address?

Hi. I cannot get past being able to view (only .. I know input isn’t supported) from iOS when on the same LAN. For example : decide name “tiny” tiny/ http://tiny/ But an IP address works: 192.168.2.105 Chrome reports this when attempting to get there...

I'm running the current version of TinyPilot on a Rpi4 with 32-bit pi os.. When I go to the kvm site, hardly any of the keyboard keys work.. Backspace, *, and / work fine but nothing else.. ctrl-alt-del also works.. Here is the strange part, if I let...

67 YEAR OLD "NEW GUY"..using all new components on a raspberry pi 4. tried two computers..swapped all compnents except for the short segment from the USBTO THE HDMI CABLE. NEW USB TO HDMI coming tomorrow, I have the dump file and don't know where to ...

Can i replace my current TinyPilot with TinyPilot Voyager 2a so i can have Audio streaming?

I just recieved my new TinyPilot yesterday. I (of course) checked to see if there were any updates needed and it says there is an update to the latest version, but in order to take full advantage of the new features I would need to do a factory reset...

Hi, I have been using my TinyPilot for last 6 month, and then last week without any changes I could not connect to it. device gets IP address from DHCP server and I can ping it but on Web GUI and SSH connection it give me refused connection error. an...

Hi. I am now testing 2 TinyPilots connected to 2 machines. On one machine, the mouse positioning is absolute. On the second, the mouse positioning is relative -- I've been using both for a few days and so I know it's not lag and probably not user err...

Hello. I currently have the TinyPilot Voyager 2 and would love to be able to stream audio using the latest 2.5.3 update. Is there any upgrade path to do so without having to buy a whole new unit, even unofficial? I'd much rather buy a $100 part than ...

Hi All. After troubleshooting using TinyPilot over an internet connection, I was only getting an MJPEG feed, and it was impossible to get H.264 video unless i was connected to my office's on-site LAN or connected via company VPN. I discovered that th...

I'm having a weird issue with the BIOS on an HP Z640 Workstation. Everytime I try to change a setting on the bios, the tinypilot screen freezes and/or the keyboard stop working. I can't even issue a crtl+alt+del to reboot, I have to power the PC off ...

Hi I am not getting screen image on my client laptop. It seems all keyboard commands are being responded to ok by the server laptop but I am not seeing the screen on my client laptop. I have changed it with a working tinypilot and everything seems to...

I am facing latency issues, and would love to get the latest update to version 2.5.0. But when I try to update it, I get a failed to update error. These are my logs: https://logs.tinypilotkvm.com/jw0lAewM

Is there anyway to get/see/obtain an inline demo ?

Hello! Just got my TinyPilot and everything works great, except I can't get the cert to work as expected. I follow all directions for installing the cert on Windows (including placing it in the Trusted Root Certification Authorities), but I still see...

Just found the TinyPilot. Looks like just what I am searching for. I do have one concern, the long term stability of using an SD card for the OS. I say this because about 8 years ago I put a Pi (running Raspian) in use to do some snmp samples. It ran...

Hi, I recently changed the hostname. After reboot, the web page will no longer come up presumably due to a certificate issue. I have http disabled. How can I enable http via the cli? I really don’t need https anymore because I now use an ssh tunnel t...