No internet connection

Welcome to the TinyPilot community!

You can ask questions, make feature requests, or share neat things you've done with your TinyPilot.

Topics, recently active firstCategoryUsersRepliesActivity
VGA not working on reboot
When we use the tinypilot with the VGA adapter, we get "NO SIGNAL" when the computer power up or reboots. However, if we boot up with a normal monitor on the VGA port of the computer and then switch to tinypilot (with VGA adapter) we get a display. O...
    Technical SupportD32022-07-13 01:32:18.147Z
    Win 11 mini PC no keystrokes
    I was able to get my TinyPilot setup and controlling a traditional midtower Win 10 PC but when I use a Beelink Win 11 minipc I can see video and control the mouse remotely but I am unable to use remote keyboard strokes or even the clickable keyboard ...
      Technical SupportT32022-07-13 00:52:43.497Z
      Shows video but cannot connect to tinypilot
      Strange problem. I bring up tinypilot and it shows the initial screen but it seems like keyboard strokes are not passed to tinypilot. Video is working fine. There is a message that shows a red disconnected status but again, the video works fine and w...
        Technical SupportJ72022-07-12 19:49:28.220Z
        Touch support
        Hello! I’ve tried using the tinypilot web UI on my iPad and iPhone and found out that I can’t seem to be able to click; tapping the screen video only moves the cursor. Is there a way to enable touch support? If not, is it a planned feature? Thank you!
          GeneralSAWX92022-07-08 18:14:51.589Z
          Connect local monitor and keyboard
          Is it possible to have a local monitor and keyboard (via usb) on the Voyager 2? I want to be able to connect a monitor to the unit along with a keyboard while still being able to get to it via network for control?
            Technical SupportAZ62022-07-07 21:30:14.190Z
            How to send a keystroke from the community api
            Hello, Has anyone successfully sent a keystroke using the community api? I want to write an ansible playbook on a cron job to call the api and send a keystroke to keep the end device from locking Currently I downloaded Burp and am seeing the http his...
              Technical SupportD12022-07-07 18:16:45.367Z
              Unable to access using Web Browser.
              I have the TinyPilot Voyager 2 POE. Unable to access using Web Browser. Tried using: https://tinypilot/ https://tinypilot.local/ https://tinypilot.localdomain/ also the DHCP assigned IP
                Technical SupportN52022-07-05 21:38:37.256Z
                Keyboard + Mouse do not work
                Hi, trying to use this in a non standard setup I would assume. I have my Raspberry Pi connected to a KVM switch I have. The video is being shown, but no keystrokes go through. I can take a picture of the connector if you want, but my assumption was t...
                  GeneralMCL92022-07-05 00:40:58.586Z
                  Web Interface No Longer Working
                  Hey, I have a Voyager 2 PoE, that I purchased a month ago (5/17/22). I have been using it, and its been working very well. I always use the web UI to shut down the unit before i unplug PoE and relocate the Voyager 2 to a new location. about 2 weeks a...
                    Technical SupportJO102022-07-01 22:53:37.119Z
                    Power splitter doesn't give power to raspberrypi
                    Hello. I love your project to control my home mac. I bought your power splitter to give more power to pi, but raspberrypi doesn't boot completely. In raspberrypi there light only green but not red. I found that that light means there is not enought p...
                      GeneralCCN122022-06-30 19:59:48.154Z
                      Explain icons...
                      Fresh install, no joy: Nginx error 502
                      Log file here: https://logs.tinypilotkvm.com/kR7G9w8i Error 502 on new install tinypilot [error] 394#394: *1 connect() failed (111: Connection refused) while connecting to upstream ... File "/opt/tinypilot/venv/lib/python3.9/site-packages/dns/rdtypes...
                        Technical SupportKK42022-06-28 02:29:40.972Z
                        TinyPilot mouse and keyboard lattency too slow
                        I bought Tinypilot for more than 1 month now, I tried everything including enabling H264. I don't see any issue when the stream from the tiny pilot(remote computer ) to my computer, I played video on the remote computer, and I could compare 99% perfe...
                          Technical SupportM92022-06-27 17:39:56.502Z
                          TinyPilot w/ KVM Switch
                          I have tried to connect a cheap KVM switch (brand: PWAY) with hotkeys with TinyPilot together. The TinyPilot could not start up if the KVM Switch with HDMI signal (PC running). Then, unplug the KVM switch and it will boot up immediately. After the ne...
                            GeneralS12022-06-24 19:31:57.296Z
                            I just ordered the Voyage 2!
                            I'm curious what PoE HAT will be used in the Voyager 2 option coming in January? I know I won't likely be able to upgrade the one that i just ordered, but still very curious...
                              GeneralG32022-06-22 16:26:01.989Z
                              crash in tinypilot
                              i have a tinypilot, it used to work fine with a vga converter, now the vga doesn't work and hdmi looks bad.
                                Technical SupportJ252022-06-21 18:25:47.030Z
                                web interface link not working
                                Thank you for the tiny pilot, I purchased it but the web interface link you sent me does not work. Also how can i get it to connect if I am in another country. My primary reason for buying it was to set it up on a laptop in the US and access it from ...
                                  Technical SupportT32022-06-20 17:11:41.540Z
                                  TinyPilot freezes after mounting virtual media
                                  Hi! I am having some trouble when mounting virtual media on Lenovo Thinkcentre M70q computers with the Voyager 2 When I mount an ISO file (both in flash and CD-ROM modes), the video freezes, and it seems to me (but it is hard to confirm because of th...
                                    Technical SupportD42022-06-17 21:02:27.159Z
                                    Factory Reset
                                    Hello, My name is Jacob. We were sent a KVM to test so we can try and sell it on our website 42U.com I set up a username and a password and for some reason it will not let me log in. However I do not have the order number to download the voyager2 SD ...
                                      Technical SupportJ12022-06-14 18:31:47.218Z
                                      No video with VGA to HDMI
                                      When I connect a pc with the VGA to HDMI I get "NO SIGNAL". It works for the same PC on the HDMI port. https://logs.tinypilotkvm.com/GY6EACMX The VGA to HDMI works with a different monitor. I tried 3 different brands of HDMI cables. The VGA to HDMI a...
                                        Technical SupportZ232022-06-14 16:33:34.517Z
                                        Debian USB issues, no keyboard mouse
                                        I've been unable to get keyboard and mouse working when connecting to a Debian PC. The dmesg output from the PC is below and seems to indicate an issue with addressing. Any help would be appreciated
                                          Technical SupportA132022-06-13 19:46:09.461Z
                                          H264 install issue, how to check if installed
                                          Hi, I attempted to install H264 but got a message in terminal that connection to the network was unexpectedly terminated. And I did not get a "done" message after some libraries were being installed. How can I check whether H264 was installed?
                                            Technical SupportA222022-06-13 19:40:24.078Z
                                            What Would Happen if power was plugged into the Data Port on the Device.
                                            Thanks in Advance. We are planning on deploying The Tiny Pilot to several clients who may not be tech savvy. If they were to mistakenly plug the power into the data port of the device, would this ruin the device, or does the device have protection to...
                                              GeneralE32022-06-13 19:25:25.146Z
                                              No Video out
                                              https://logs.tinypilotkvm.com/TejfFamD I've tried different USB to HDMI adapters as well as reducing the resolution on the desktop. I don't get Video Out. :/
                                                Technical SupportB32022-06-09 19:26:46.678Z
                                                How would the dns name tinypilot be resolved?
                                                I am just curious how that would work, given the instructions say: With your TinyPilot booted, you can now access the TinyPilot web interface from any device on your local network by visiting one of the following URLs: https://tinypilot/ https://tin...
                                                  Technical SupportL12022-06-08 19:32:12.730Z
                                                  Lag after some use
                                                  Hi, for some reason my tinypilot ( latest version POE ) becomes very laggy after being in use for around 1h. In order to fix it I need to turn it off( removing AC and Network cable [I have both connected]. Initially I only had it connected to the POE...
                                                    Technical SupportS42022-06-08 19:05:29.415Z
                                                    Wake on Lan not working; can't wake target computer when it sleeps or shuts down
                                                    I discovered the Wake on Lan feature after reading this thread: can't wake computer using mouse/keyboard I followed the instructions, but WoL isn't allowing me to wake or turn on my target computer. Also, when I physically push the power button to po...
                                                      Technical SupportS12022-06-02 19:10:04.380Z
                                                      Mouse and keyboard don't work, and No Signal when target computer sleeps
                                                      I'm just setting up my TinyPilot. I can see my target MacBook's screen in the web interface. But I can't control it from the web interface. On my target computer, I made sure mirror mode was turned off, and that the TP was set as the Main Display in ...
                                                        Technical SupportS32022-06-02 18:55:19.802Z
                                                        Error when updating from 2.4.0 to 2.4.1
                                                        In the UI, it shows error: The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 128. In SSH, when I run this command, I get this error: pilot@tinypilot:~/ngrok $ sudo /opt/tinypilot-privileged/update...
                                                          Technical SupportTF72022-06-01 15:37:11.386Z
                                                          How can I get the MAC address of the TinyPilot?
                                                          Hello everyone I've just go the voyager 2 device and I'm trying to get to the web interface. IPs in our network are mac-based. devices do not get an IP unless DHCP knows their MAC address. How can I get the MAC address of the tinypilot? Thank you
                                                            Technical SupportG32022-06-01 14:34:59.023Z
                                                            Can't access TinyPilot web interface during first setup
                                                            It sounds like this might be the same issue mentioned in this thread, but I'm not sure: can't connect Here's what I've done so far: Plugged ethernet into TP. The ethernet port currently has a flashing green light on the left, and a solid orange light...
                                                              Technical SupportS72022-05-30 23:45:58.874Z
                                                              accessing my home desktop at work
                                                              hello. so i bought this kvm because it looked cool and i need to access my home desktop at work sometimes. but i have a problem, how can i access it at work without setting up a vpn? because my work computer is always on a diffrent vpn(maybe whitelis...
                                                                Technical SupportTT52022-05-28 03:47:24.544Z
                                                                Scrambled image on tinypilot voyager v2
                                                                Hello, I just received a tinypilot voyager v2 and am having difficulties. Followed the instructions, but can't get the video signal to work. See screenshot. I double-checked the cable and confirmed that it works properly using a regular monitor. Woul...
                                                                  Technical SupportC22022-05-27 19:12:57.383Z
                                                                  "Log Out" does nothing on 2.4.1
                                                                  I'm running 2.4.1 (with h.264 enabled) and have noticed since upgrading that selecting "Log Out" from the TinyPilot System Menu, it does nothing (ie doesn't log out). Is this isolated to me or is it happening to others?
                                                                    Technical SupportS22022-05-25 23:11:31.349Z
                                                                    Problem in videobuf2-core ?
                                                                    I just made a dmesg to verify my undervoltage problem was gone (it is) and found this in the logs.. no clue what it means / if its a problem: [1399846.223492] ------------[ cut here ]------------ [1399846.223721] WARNING: CPU: 0 PID: 11 at drivers/me...
                                                                      Technical SupportD12022-05-20 18:23:57.708Z
                                                                      azerty keyboard layout
                                                                      Hello I cannot find any documentation to update the keyboard layout to "azerty". Thank you for your help, Emeric
                                                                        Technical SupportE52022-05-17 16:03:23.241Z
                                                                        NGINX Server not starting
                                                                        Good morning @michael! I’ve had great success and a lot of use out of the Tiny Pilot for a few weeks now. Unfortunately, when I went to log on to my tiny pilot via the web URL (IP address or host name - ssh is fine) I couldn’t connect to the web serv...
                                                                          Technical SupportL142022-05-16 21:27:06.040Z
                                                                          Updating TinyPilot behind proxy
                                                                          Hi, we currently have a couple of TinyPilot Voyagers and are in a company network and sitting behind a proxy. We would like to update via WebGUI but there is no way to set a proxy via webGUI. I have enabled SSH and set the proxy via command for GIT, ...
                                                                            Technical SupportA42022-05-13 21:04:07.976Z
                                                                            Reason behind using web interface
                                                                            Just for knowledge, I am curious to know why tinypilot is using web interface for the remote pc access? If anyone can help me understand this.
                                                                              GeneralH12022-05-12 16:05:39.221Z
                                                                              Hard reset of voyager v2
                                                                              I need to hard reset voyager v2 because i forgot my password. Where can i find the iso for it? the ones available dont seem to work
                                                                                Technical SupportJ212022-05-10 21:18:36.014Z
                                                                                hardware endpoint instead of web browser? Protocol for that...
                                                                                I want to read out keyboard and mouse from a USB port on one raspberry pi and forward this to the TinyPilot switch in the other end. No need for video, audio etc, and also no need for the WEB ui of TinyPilot - just want another hardware end point. Is...
                                                                                  Technical SupportK12022-05-06 20:23:01.622Z