TinyPilot

Hi, Just received a TinyPliot KVM, plugged in, the device received an IP from DHCP but will not respond to anything. Tried the following: -Rebooted -checked cable -SSH'ed -All URLS no work -ping local IP no response I am no the same subnet so there i...

Hello When I try to install the H264 video, I do get an error. Please see the error below TASK [ansible-role-janus-gateway : Clone janus-gateway] **************************************************************** fatal: [localhost]: FAILED! => {"change...

I've installed a new TinyPilot Voyager 2 over wifi (not ideal, I know, but it worked well enough testing locally and there was no hardwire near the computer needing the KVM). It worked locally, and initial testing (at home) worked slower but acceptab...

Hi there, I just received TinyPilot2 and been setting it up. I always have a hard time with the HDMI display (it's hdmi to hdmi) on multiple devices (a nuc, 2 laptops, a desktop) and multiple combination of cable brand (i have tried 8 different brand...

I have been successfully using (and loving) my TinyPilot Voyager 2 for a while now and all of a sudden, I am not able to access it. I have tried to ping it with no response. I followed steps in: TinyPilot not getting an IP address? without success. I...

I use Veeam Windows/Linux Agent to backup my client machines. If I ever need to do a restore, step 1 is to boot from the VeeamRecovery.iso (which would be loaded via TinyPilot). Step 2 would be to tell Veeam Recovery to grab my backups from a network...

After following Tiny Pilot website instructions the device failed to connect to anything. No Ethernet lights, no activity light and no functioning monitor, keyboard or mouse. Only solid red light and fan show any indication of life.

Closed

Thanks to David, I've now got my TinyPilot working great. However, the DVR it's connected to can only use a mouse input, and it appears the keyboard signal may be causing the mouse control to choke. Is there a simple way to disable the TinyPilot USB ...

Hello! I can no longer reach the tinypilot user interface in my browser despite the device appearing to be normal. My home network configuration tool shows "tinypilot" as a DHCP client with a local address. I can ping that address and receive a respo...

I received my TinyPilot and was happy with the build and ease of connecting. I first tried it out on a laptop (Elitebook 850) and immediately encountered what is probably a lilitation outside of TinyPilot's control. When booting, there doesn't seem t...

We have recently purchased the TinyPilot Voyager 2 and it seems to mostly work, except the attached computer is not receiving keyboard input, neither from the virtual keyboard or a physical (remote) keyboard. All USB cables are attached as directed, ...

I recently purchased a TinyPilot Voyager and I followed the instructions properly from this website to set it up. However, I am only getting a red light upon connecting the TinyPilot Voyager to power and ethernet. I suspect the image is corrupted bec...

I've come from over 30 years in the DOS and Windows world, and a newbie to Raspberry pi/Linux/Unix(and variants). I built the TinyPilot KVM with the Pi 4 and GeekWorm CS2 camera module to manage my security camera DVR. I tested it with my laptop, and...

Hi I recently setup the Tiny Pilot Voyage 2 into my target Computer, however I could not get a proper image shown in the tinypilot website. I had restarted the TP, changed a new HDMI but the problem still persists. Please give me some solutions on th...

tinypilot when connected to an Optiplex 9020M has problems: 1.- display Bios settings f2 and f5 system test is OK 2.- Linux Boot options screen not displaying and Linux Rockylinux does not display 3.- Virtual media does not work 4.- Keyboard and Mous...

I am referecing: https://tinypilotkvm.com/faq/static-ip In the Putty session I enter the following commands and then hit the enter key shown by --> export TINYPILOT_STATIC_IP="10.0.0.223/24" export ROUTERS="10.0.0.1" export DNS="${ROUTERS} 8.8.8.8 1....

Hi, I'm hoping this is something that can be added. I have a handful of servers and devices that support WOL. After a power outage or scheduled shutdown, it would be great to be able to have their MAC address along with a friendly name in a saved lis...

Using Tiny Pilot is not getting any data over it connection. I have tried to change cables and updating the Tiny Pilot. In windows the Tiny Pilot is giving a code 43 error and when I go to get debug all is says is "write error: No space left on device".

When clicked "update" button from the menu, the below error message appears: Error: Failed to check latest available version: fatal: unable to access [redacted]: Couldn't connect to server Please help.

Hi There, Recently got one of your KVMs from your re-seller in Germany for testing, I'm based in the UK. Firstly - When connecting to a standard PC or MAC via the TinyPilot, I thought the experience was great. I found the mouse movements much smoothe...

Trying to load windows 11 iso in virtual media set in Flash mode. Shows up ad USB CDROM: When I try to to boot to it I get this:

Hey Tiny Pilot team, I've seen this issue reported a zillion times over, and I'm sorry to add another to the pile. I'm using a TinyPilot attached to a Mac Studio. This Mac is erased very frequently, and oftentimes during the install process the devic...

I use a Gigabyte Z690i DDR4 motherboard. When I put my mouse on the up left corner, the mouse on my remote machine is the same place. But when I move my mouse to the down right, it only moves about half of my actual movement. Therefore, when my mouse...

A bit in the realm of niche ideas but... I'm currently in a role where we frequently end up in a situation where the "hands" we have onsite aren't IT minded. If we could ship them a TinyPilot with a builtin 4G connection and some sort of remote conne...

Team, I installed the tiny pilot and follow the instructions. However I can see the video output but my mouse or keyboard inputs are not sent over to the laptop. I do not know what I am doing wrong. https://logs.tinypilotkvm.com/gSdizG83 Can anyone p...

DVI to HDMI displays colored screen after tinypilot upgrade. https://logs.tinypilotkvm.com/jY5oYVmm

Hi, my tinypilot (connected via WIFI, not ethernet) become unreachable via SSH every 72hrs and i found out that it is actually quite a common issue for rasp pi https://forums.raspberrypi.com/viewtopic.php?t=64620 https://raspberrypi.stackexchange.com...

Hi, Just like the title says, I can't get any keystrokes or mouse pointer changes to work. I tried on a computer that was working just fine with TinyPilot (windows 10); restarted computer and raspberry pi many times, changed all usb cables and secure...

I downloaded the image to do a factory reset, but when I try to cut the image to a SD Balena fails. I've tried on two different chips. I also put a request into Balena support but thought I would see if this problem was encountered by other Tinypilot...

Hello I found the mouse and Keyboard are not working, please help me asap ??? it is give me error message -? USB is not recognize

Hi - I'm so glad I bought a TinyPilot. I have a highly locked down corporate Windows laptop that I'm now able to integrate very nicely into my dual-monitor Mac world. My only struggle is that keyboard input is pretty slow. Keystrokes buffer up and ap...

Can't seem to find my order number? How do I retrieve it. I need to do a reset on the Tinypilot.

I noticed the root filesystem on our tinypilot has errors, and it seems it's not been fixed at reboot. I had a look using dump2fs, and this is the result: root@tinypilot:~# dumpe2fs -h /dev/mmcblk0p2 dumpe2fs 1.44.5 (15-Dec-2018) Filesystem volume n...

I'm trying to setup TinyPilot on a Window 98 (no, that's not a typo!!) machine. I've got functional video and keyboard support working, but I cannot get the mouse to work. I suspect it may not like the mouse and the keyboard coming in on the same USB...

I have a hunch the answer to this is no but I'll ask anyway. Is there a way to allow a user to access the browser on the network that the Tinypilot is on at the remote location. I know the first response is why not just access the browser from the PC...

Hello. I am testing various 4:3 desktop resolutions from older machines running Windows 98, Windows 2000 and Windows XP. I am using the VGA to HDMI adapter sold with the Voyager 2. 640x480 and 800x600 display correctly and operate very well. Some lar...

Hi I just get a broken image and no remote desktop coming through, checked all the cables, updated the software, works fine out to a monitor. Any ideas? Screenshot below

Hi, Thanks for sharing this project, great work!! I installed tinypilot on an Odroid C4. (I had to comment out the 64-bit version of Raspberry Pi OS check in quick-install). Running Armbian 22.05.3 with Linux 5.10.133. Keyboard, mouse, and video (HDM...

The cursor seems to lag about 5-10 secs behind the movement. Using remoteit to connect to Tinypilot. Also, just to add to the weirdness, on my laptop the cursor doesn't appear. On my desktop it appears but lags. Laptop is connected via wireless to th...