No internet connection
  1. Home
  2. Technical Support

No LAN Connection on New Device

By @moto822
    2022-09-23 16:09:38.569Z

    Hi,

    Just received a TinyPliot KVM, plugged in, the device received an IP from DHCP but will not respond to anything. Tried the following:

    -Rebooted
    -checked cable
    -SSH'ed
    -All URLS no work
    -ping local IP no response

    I am no the same subnet so there is no routing/firewall issues.

    Reply
    • 2 replies
    1. David @david2022-09-26 12:55:44.858Z

      Hi @moto822, sorry that you can't connect to your new TinyPilot. And thanks for sharing what you've already tried!

      The first boot typically takes a few minutes to set everything up. Can you power on your TinyPilot, wait 5 minutes, and then ping the TinyPilot's IP to see if you get a response?

      If you know the IP address, can you try accessing the web interface using that instead of https://tinypilot.local or https://tinypilot ?

      If you still don't get a response from your TinyPilot after trying those steps, you might need to re-flash the SD card.

      As a side note, ssh is disabled by default. You can enable ssh in the Security menu of the web interface. But it means that an ssh connection isn't possible at this stage.

      Reply
      1. M@moto822
          2022-09-26 19:35:16.968Z

          I have tried letting it sit with no success. I did try accessing the URLS with no success either. I am now trying a re-flash of SD Card.

          Reply
        ReplyAdd progress note