TinyPilot

I Bought it from Amazon I tried to reset it but image file can only be downloaded by order id how to reset my tinypilot voyager2a need some help man. Its not supporting sound.

Good day I saw this link https://tinypilotkvm.com/blog/dslr I do get visuals on my pc , but how to trigger the shutter ? the only thing I saw seems to open the unit ? and connect the shutter cable to access the GPIO pins, no 5 and 6 . Is that correct...

I have looked at the other tickets and tried swapping HDMI cables, rebooted (the pilot as well as the computer). I just can't figure out what is going on. It updated and when it was done there was no signal. https://logs.tinypilotkvm.com/lJbcdSFQ I a...

Hello Michael, I have built a tinypilot myself using the recommended hardware. I am experiencing sudden black screens akin to this issue Black screen However, for me, the black screen appears sporadically. restarting the host machine does not seem to...

I've seen a handful of similar posts regarding the same issue but wondered if a fix is found or if I should give it a go with another KVM.. I just received my Voyager 2a and am trying to get things working with the AIMOS 4 port HMDI switch listed on ...

After updraging Tinypilot 2.6.2, screen is showing no signal. On laptop boot, it's showing but after laptop boot, no signal. https://logs.tinypilotkvm.com/tmnxIcrr

Hi all, We want to connect remotely to a TinyPilot Voyager device using port forwarding on our router. We have a dynamic public IP address and we need to use a DynDNS service (No-IP for example) to connect, but we see that pur router doesn't have any...

From the basic start up screen I was able to access the web interface that the TinyPilot voyager2 was connected to. I would prefer to lock down the web interface by creating 1 additional login that (for the web interface) does not have the ability to...

How do I setup the hobbyist kit to use wifi instead of ethernet? Ran out of room on my switch.

Hi Michael. I purchased TinyPilot voyager and set it up for a laptop recently. It worked fine after my first setup. But once I detached the device from the laptop and did attach to the laptop, TinyPilot started to fail to catch the screen (NO SIGNAL ...

I have the Tiny Pilot Pro and I just updated everything to the latest, but the audio is not working The image I downloaded says Tiny Pilot Voyager 2a, but the help still says Tiny Pilot Pro Does that mean it's not supported? Since the help says it's ...

I've read through the FAQ documents but am still confused. I have three laptops, laptop A and B. Laptop A will have TinyPilot plugged in. Laptop B is on the same network as Laptop A. Laptop C will sit in a different network and access Laptop A. I und...

Hello, I have tried to follow the guide to setup my TinyPilot KVM using my Raspberry Pi 4 Model B 8GB. I purchased a USB HDMI capture device just like the one in this guide: https://tinypilotkvm.com/blog/build-a-kvm-over-ip-under-100#how-to-build-you...

Since a while i can not use the key > or pipe key anymore. Keyboard layout is MAC and Tiny is displaying a windows version. I guess this problem came with an update. How can this beeing solved.

I've got a use case where people at a central office location wants to have view only h264 streams from Tinypilot devices deployed in remote locations with metered internet (Starlink). We have a working implementation for that using RTSP cameras feed...

is there a way to keep track of user log ins or trigger notification when a user logs in?

How to rename the device ? Currently it shows as tinypilot USB device It currently shows under mass storage devices under Device Manager Is it possible to have it show up as something more generic? https://docs.microsoft.com/en-us/windows-hardware/dr...

Hi. My voyager 2a is failing to boot so I'm going to flash the card with tinypilot-voyager-2.6.2-2023-11-09T1727Z.img downloaded from your website. I'd like to be able to check the downloaded file has the expected contents. Please put the expected sh...

is there a way to record sessions?

What are the USB ports for? What is the one in the black and the blue? Is it 2.0(Black) and 3.0(blue) ? How can I use it for other than load virtual OS?

Hi guys, I hope you are doing well. I'm still struggling with changing the edid of my tinypilot , I have very little knowledge and trying to do my best. I used the procedure : https://tinypilotkvm.com/faq/change-edid , but getting this error at the e...

Can you please share some info on setting a Cron job for TinyPilot awake/sleep Mon to Friday 7AM to 10 PM? I want the device to rest when not in use for its longer life. Also please help me with how to awake the device from sleep on demand apart, fro...

What does Enable Key History under "View" Tab do? How does it help?

Can you please let me know how many instances can one login into TP web view simultaneously? Is it possible to connect to TP Web view by 2 different people from different locations at a same time remotely?

I just got my device. I tried shutting down my TP via GUI remotely. Is there a way to turn on the TP device back remotely? All cables(ethernet, HDMI, Power, USB C to USB A) are intact to TP.

Tinypilot comes up fine and I can see the video with no problem. When I move the cursor or try to key something in, nothing happens (at least that's the way it looks). Cursor doesn't move, keys are not echoed. But, in reality the mouse movements and ...

How can you see that the insered SD-card is flashing the existing system? I flashed the SD-card based on your manual, insered the card, rebooted the device and waited for at least 20 minutes - but nothing happened. I would expect that i see a dhcp re...

I tried controlliing my TP web interface using my android phone on chrome browser, I was unable to move the mouse or press any key. There was no response to the touch. I also tried to switch the website to "Desktop Version" It dint work. Please help/...

Hi there! I ordered one of the original TinyPilot Hobbyist kits back in 2021. Up until today, it had been working perfectly, however, today I upgraded to 2.6.2 and while it came back up, I have been unable to get video to work since it came up. I fou...

Tried multiple reboots but still get this error. 502 Bad Gateway nginx/1.18.0 Log attached: https://logs.tinypilotkvm.com/mICfAPMt

Hi, I am looking for softwares that can detect/scans the ports of the computer if a TinyPilot device is connected? Thanks, A

Hello, I bought a tiny pilot voyager 2a 20 days ago. I think I have it in possession for 10 days tops and the fan already started grinding and failing to spin. I have 2 questions: Is it safe to run it with the fan unplugged? What do I need to do to g...

Hi Support, I have an exact same problem as another member in the forum that asked for help. But since the resolution was resolved off this site. I will need to re-ask for help: I tried to upgrade my Voyager but now it's dead and doesn't even respond...

Hi ... I tried to upgrade my Voyager but now it's dead and doesn't even respond to pings. I'm happy to try and reflash the sdcard but it prompts me for my original purchase details since I think I might need a new subscription. Is there a location wh...

I'm trying to update the Tiny Pilot Pro to the latest version - 2.5,4 and I get errors every time I try to do it: The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2.

Trying to update from 2.6.1 to 2.6.2 and getting the disk full message. Here is the df output If it is because the USB stick is only 4GB can I just copy the contents to a larger stick or do I have to use the utility to recreate the files? The documen...

I've been using a tiny for about a year and I think it's an amazing product. It has saved me a lot of time but one thing that really slows me down is using the keyboard of the tiny pilot instead of using the mobile native keyboard. Is it posible to u...

Is entering the disk encryption password at boot always a problem with TinyPilotKVM, or does it depend on specific laptop model/software? Raising this topic again to see if there have been any solutions. The problem was first reported in this post, b...

Hi there, We're using several TinyPilots on internal networks in my company and would like the option of very short and simple passwords. Is there any configuration file I can edit to disable password complexity requirements? I.e. allow shorter than ...

Hi, somehow I was using 2.5.0 and was trying to do a quick update after quite sometime. However, upgrade from 2.5.0 to 2.5.4 seems having some known bugs, and wasn't aware of it until I experienced it, and checked over here. Tried to import the key, ...