No internet connection

Welcome to the TinyPilot community!

You can ask questions, make feature requests, or share neat things you've done with your TinyPilot.

Topics, recently active firstCategoryUsersRepliesActivity
No signal with VGA adaptor - keyboard and mouse works fine.
Hi, I have just received the "tiny pilot" together with the VGA to HDMI adaptor. I keep getting "NO SIGNAL" on a black background when connecting. Keyboard and mouse works fine. I experience the same with 3 different VGA outputs/sources. I have succe...
    Technical SupportKN62023-02-08 12:40:38.933Z
    Can't send keyboard-mouse input to target machine
    Current machine = Macbook Pro Target machine = the machine I want to remotely control, a desktop PC. I have set-up TinyPilot with my target machine and can access it via IP address in a web browser using TailScale. Here's what I see: https://ibb.co/0...
      Technical SupportT32023-02-07 12:05:35.970Z
      Update failed from 2.4.0 to 2.5.0
      I can't update the tinypilot The update failed: Command '['sudo', '/opt/tinypilot-privileged/scripts/update']' returned non-zero exit status 2. https://logs.tinypilotkvm.com/6RBTyVpF Please advise, Alexander
        Technical SupportAC32023-02-06 22:30:46.381Z
        MSI Bios is completely unusable
        When booting into the bios on an MSI X570-A PRO, the interface essentially becomes completely unusable. I managed to get it into the advanced -> config mode using the keyboard, but then even that became unresponsive quickly. This is the first time us...
          Technical SupportCMT72023-02-06 20:19:48.008Z
          Refund Request
          Hi, I have not been able to get the TinyPilot Voyager 2 PoE up and working. For $474.81, I hoped for a seamless solution. Forum-based support has not been responsive enough and unfortunately, I don't have much time to wrestle with this since I need t...
            Technical SupportTT42023-02-06 17:37:26.377Z
            Audio streaming
            Hello, I installed the tinypilot and so far it's been great. I use it to remote control a work laptop at the office from home. I was wondering if there is a way to stream the audio/microphone so that I would be able to also take calls from the work l...
              GeneralFVTMC122023-02-06 17:20:22.415Z
              enable SSH
              Hi, my SSH access was disabled and unable to enable back. may i know how to enable it? thanks!
                Technical SupportOC52023-02-06 17:14:10.375Z
                No mouse when connecting TinyPilot via AIMOS KVM
                When my TinyPilot is connected directly to a PC it works fine, but if I try to connect it via an AIMOS KVM as described in the KVM compatibility list (i.e. combined with HDMI splitter) the keyboard works but the mouse does not, the pointer jiggles ra...
                  Technical SupportDT162023-02-06 12:38:53.312Z
                  2.4.1 H264
                  Hello there :) I see that experimental support was added for H264 streaming, but I don't see any way to enable it in the GUI. I'm guessing it's done over SSH and if so, how? Thanks!
                    Technical SupportNLDS132023-02-04 08:37:22.087Z
                    Alt-Tab leaves remote system as if Alt is still pressed
                    First I love being able to work on my 2nd machine within a window on my primary desktop. Thank you. [edit: I am running in Chrome's "create shortcut" app mode, if that matters.] But when I use Alt-Tab (yes, I am an long-time keyboard user) to switch ...
                      Technical SupportFRA92023-02-02 17:31:25.686Z
                      Explain icons...
                      Tiny Pilot to Raritan KVM
                      I just purchased a TinyPilot Voyager 2 in hopes of using it with our Raritan Dominion KXII.. I had no issue setting the unit up. I did purchase the VGA to HDMI adapter and plugged that into the Raritan KVM. I can see the main menu and the keyboard an...
                        Technical SupportC52023-02-02 17:17:12.982Z
                        Error when connecting in browser
                        Using Tinypilot voyager with Tailscale on ethernet cable over IP. Was working before that, but was having internet issues. Any ideas what happened or how to fix? Getting before the login page should be popuping. instead get this: {"code":null,"messag...
                          Technical SupportTC82023-02-02 02:24:26.236Z
                          Keyboard not working
                          Hello Guys, We've bought TiniPilot2 for about 6 months ago, but we never were satisfied. The keyboard simply crashes in BIOS, in different Linux systems like Centos 7, Almalinux 8 and others. Also a lot of video glitches. I don't understand why so, b...
                            Technical SupportAC32023-02-02 01:53:06.058Z
                            Can I use the tinypilot as a wifi hotspot?
                            i dont have wifi enabled yet, but im curious, as opposed to connecting to the tinypilot's wifi ssd (presumably)is there a way to feed an ethernet cable from a router with internet, or a computer, into tinypilot, and have my tinypilot , which has tail...
                              Technical SupportMC32023-02-02 01:42:44.210Z
                              Using tinypilot voyager 2 with multiple computers
                              I need to connect 3 computers and use them remotely. Do I need to get 3 Voyager 2 units, or can I use one unit to control each of the three computers from my tablet?
                                Technical SupportZC72023-02-02 01:36:14.804Z
                                Obtaining a screenshot using the internal API
                                I'm a student writing custom software to automate a host machine (also referred to as the "target") through the TinyPilot Voyager 2 using the exposed APIs defined in api.py (for RESTful calls) and socket_api.py (for WebSocket connections). For the cu...
                                  Technical SupportA2J62023-01-30 23:05:52.414Z
                                  tinypilot running out space because of log files
                                  When I tried to update tinypilot today, I discovered that it had run out of space. Investigation showed that /var/log/syslog and /var/log/kern.log were about 7 gigs each. The reason probably is that I only run tinypilot on a need basis, i.e. I don't ...
                                    Technical SupportSC12023-01-29 03:33:06.550Z
                                    Technical SupportM2C72023-01-29 01:00:50.767Z
                                    Changed RSA certs for ECC and modified NGINX config, will this revert?
                                    I installed our first Tinypilot today and added our custom SSL certs. When trying to connect to NGINX we realized there was a public-key signature algorithm mismatch so the client/server couldn't agree on a cipher and the SSL handshake failed. It was...
                                      Technical SupportS2CS222023-01-27 15:01:05.775Z
                                      Error: Malformed API response, content type must be JSON. Response status: 504
                                      i try to turn on ssh on the security page in tinypilot, it shows disconnected after a few seconds (red button on bottom left), but I get this error in a pop up. Refreshing shows ssh still disabled. how to fix this? Also any commands, once I do ssh, t...
                                        Technical SupportM12023-01-27 12:32:56.439Z
                                        update from 2.5.0 to 2.5.2 failed
                                        The update from 2.5.0 to 2.5.2 fails. The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 100. The issue appears to be here: dpkg: unrecoverable fatal error, aborting: reading statoverride file '/v...
                                          Technical SupportS52023-01-27 12:23:01.321Z
                                          No mouse or keyboard input
                                          No mouse or keyboard input. Confirmed using USB-C (Data) from TinyPilot to USB-A on device. Updated to latest version 2.5.2 Logs - https://logs.tinypilotkvm.com/kHBQq5rL lsusb Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Dev...
                                            Technical SupportHC32023-01-26 14:30:00.177Z
                                            Web upgrade 2.5.0 to 2.5.2, then no response on network
                                            Use the web based upgrade and watched all the messages. When completed got a message something like "Can not connect. Please power off and on and try again" I power cycled and still no web access or response to ping. Please advise how to proceed. Tha...
                                              Technical SupportMC22023-01-26 12:36:57.737Z
                                              Tiny Pilot Access from mobile device
                                              Hello, I was able to get my tinypilot Voyager 2 v2 set up, and calibrated the remote access using the tailscale client. Great functionality and when accessing from my PC I have no complaints! I have not tested off site, but I was able to connect from...
                                                Technical SupportR12023-01-24 15:51:25.689Z
                                                Keyboard and mouse don't work anymore
                                                Hello, I've purchased the Voyager 2 a few months ago (July) and it's been working fine the few times I've had to use it, but recently I've noticed that my keyboard and mouse don't work anymore. I've checked the logs and I get the standard "Is USB cab...
                                                  Technical SupportK252023-01-23 12:02:30.165Z
                                                  usb-gadget keeps exiting
                                                  I have a TinyPilot Voyager 2 and it seemed to be working fine for a while. One day, it apparently stopped sending USB input. I tried running: echo -ne "\0\0\0\0\0\0\0\0" > /dev/hidg0 and got an error saying: echo: write error: Cannot send after tran...
                                                    Technical SupportPC82023-01-23 01:18:20.659Z
                                                    screen only shows windows I can see the reboot or BIOS screen it says no signal until windows boots
                                                    screen only shows windows I can see the reboot or BIOS screen it says no signal until windows boots
                                                      Technical SupportMC12023-01-23 01:12:45.233Z
                                                      display problems
                                                      we got various Lenovo Thinkpad Laptops (E and T series) and very often it will happen that the screen goes black. Not sure what is causing this, rebooting the Tinypilot or pressing anything on keyboard does fix it. Even reconnecting HDMI cable is not...
                                                        Technical SupportXC42023-01-23 01:05:03.654Z
                                                        Upgrade Buster to Bullseye
                                                        Hi, I tried to upgrade the official tinypilotkvm Buster device/image to Bullseye, by following the Debian instructions for upgrades. The process failed due to some of the tinypilot packages and the device now won't even boot. No need to troubleshoot,...
                                                          Technical SupportA3C12023-01-23 00:56:50.745Z
                                                          Tinypilot bullseye image?
                                                          Hello, I logged into https://tinypilotkvm.com/pro/license-check with my email and order number, and I downloaded the latest tinypilot-voyager-2.5.2-2023-01-17T1501Z.img. I see that it's still based on Raspberry Pi OS Buster, is there a newer version ...
                                                            Technical SupportA3C12023-01-23 00:44:54.548Z
                                                            how to disable wifi and only route traffic through ethernet
                                                            Hi, i've enabled the wifi and now would like to disable the wifi, and only route traffic through ethernet, how would i be able to do that.. thanks
                                                              GeneralJC12023-01-18 20:20:53.147Z
                                                              Hello. Cannot connect to the tinypilot
                                                              Hello. I bought my pilot 2 wks ago. Tinypilot worked fine till yesterday. My computer and the tinypilot are on the same network. I can ping it but I cannot open anything in the browser. It shows err "tinypilot refused to connect." The ethernet connec...
                                                                GeneralAAJ82023-01-18 14:35:57.264Z
                                                                Keyboard not working
                                                                Original data cable is plugged into DATA USB C port on Tinypilot Voyager 2 and then plugged into a USB 3 port on the target machine. Video works well, USB does not seem to work. Here are logs: https://logs.tinypilotkvm.com/HD4qpWF3 The keyboard bubbl...
                                                                  Technical SupportC2C12023-01-17 00:44:26.674Z
                                                                  Video screen problem.
                                                                  Having issues with display back. Only option is to reboot the device. How do I go about getting this resolved?
                                                                    Technical SupportMS2132023-01-16 12:40:39.160Z
                                                                    emulated mouse options?
                                                                    I'm using a tinyPilot Voyager 2 with an Iogear KVM switch. The KVM does not support the absolute positioning HID that tinyPilot presents; the cursor just freaks out all over the screen of whatever machine I connect to, which can be a little dangerous...
                                                                      Technical SupportKQ72023-01-13 20:02:34.021Z
                                                                      Detecting a Tiny Pilot...
                                                                      Is there any way for Tiny Pilot to be detected (as opposed to a standard kb, mouse, or monitor)? I see the computer show the standard "HID-compliant" mouse and keyboard... and a generic monitor via Device Manager. What about via WMI or other system q...
                                                                        Technical SupportEC12023-01-13 17:34:39.870Z
                                                                        TinyPilot Voyager 2 PoE problems with Ubiquiti UniFi Switch Lite 8 PoE
                                                                        I bought the TinyPilot Voyager 2 PoE last month, and it works fine with the USB power supply. I just bought the Ubiquiti UniFi Switch Lite 8 PoE which is supposed to provide 802.3at power ports. Connected over a PoE cat8 wire from the switch, while i...
                                                                          Technical SupportSP62023-01-11 12:18:13.225Z
                                                                          Technical SupportG72023-01-10 16:48:44.704Z
                                                                          Unable to see TinyPilot in IP scanner (TinyPilot not showing in Talescale)
                                                                          Hello Friends Need help with setting up TinyPilot for the first time on my personal laptop. Followed all the steps as mentioned but I am unable to see TinyPilot in IP scanner. Also the TinyPilot in the not showing in Talescale admin window). Tried al...
                                                                            Technical SupportP292023-01-06 13:14:51.095Z
                                                                            Browser Tab rename
                                                                            Hi, i would like to rename the tab name from "tinypilot" to something more common like "laptop1 ...". How can this be done?
                                                                              Technical SupportTC92023-01-04 17:46:54.763Z