TinyPilot

Hey, I have a Voyager 2 PoE, that I purchased a month ago (5/17/22). I have been using it, and its been working very well. I always use the web UI to shut down the unit before i unplug PoE and relocate the Voyager 2 to a new location. about 2 weeks a...

Hello. I love your project to control my home mac. I bought your power splitter to give more power to pi, but raspberrypi doesn't boot completely. In raspberrypi there light only green but not red. I found that that light means there is not enought p...

Log file here: https://logs.tinypilotkvm.com/kR7G9w8i Error 502 on new install tinypilot [error] 394#394: *1 connect() failed (111: Connection refused) while connecting to upstream ... File "/opt/tinypilot/venv/lib/python3.9/site-packages/dns/rdtypes...

I bought Tinypilot for more than 1 month now, I tried everything including enabling H264. I don't see any issue when the stream from the tiny pilot(remote computer ) to my computer, I played video on the remote computer, and I could compare 99% perfe...

I have tried to connect a cheap KVM switch (brand: PWAY) with hotkeys with TinyPilot together. The TinyPilot could not start up if the KVM Switch with HDMI signal (PC running). Then, unplug the KVM switch and it will boot up immediately. After the ne...

I'm curious what PoE HAT will be used in the Voyager 2 option coming in January? I know I won't likely be able to upgrade the one that i just ordered, but still very curious...

i have a tinypilot, it used to work fine with a vga converter, now the vga doesn't work and hdmi looks bad.

Thank you for the tiny pilot, I purchased it but the web interface link you sent me does not work. Also how can i get it to connect if I am in another country. My primary reason for buying it was to set it up on a laptop in the US and access it from ...

Hi! I am having some trouble when mounting virtual media on Lenovo Thinkcentre M70q computers with the Voyager 2 When I mount an ISO file (both in flash and CD-ROM modes), the video freezes, and it seems to me (but it is hard to confirm because of th...

Hello, My name is Jacob. We were sent a KVM to test so we can try and sell it on our website 42U.com I set up a username and a password and for some reason it will not let me log in. However I do not have the order number to download the voyager2 SD ...

When I connect a pc with the VGA to HDMI I get "NO SIGNAL". It works for the same PC on the HDMI port. https://logs.tinypilotkvm.com/GY6EACMX The VGA to HDMI works with a different monitor. I tried 3 different brands of HDMI cables. The VGA to HDMI a...

I've been unable to get keyboard and mouse working when connecting to a Debian PC. The dmesg output from the PC is below and seems to indicate an issue with addressing. Any help would be appreciated

Hi, I attempted to install H264 but got a message in terminal that connection to the network was unexpectedly terminated. And I did not get a "done" message after some libraries were being installed. How can I check whether H264 was installed?

Thanks in Advance. We are planning on deploying The Tiny Pilot to several clients who may not be tech savvy. If they were to mistakenly plug the power into the data port of the device, would this ruin the device, or does the device have protection to...

https://logs.tinypilotkvm.com/TejfFamD I've tried different USB to HDMI adapters as well as reducing the resolution on the desktop. I don't get Video Out. :/

I am just curious how that would work, given the instructions say: With your TinyPilot booted, you can now access the TinyPilot web interface from any device on your local network by visiting one of the following URLs: https://tinypilot/ https://tin...

Hi, for some reason my tinypilot ( latest version POE ) becomes very laggy after being in use for around 1h. In order to fix it I need to turn it off( removing AC and Network cable [I have both connected]. Initially I only had it connected to the POE...

I discovered the Wake on Lan feature after reading this thread: can't wake computer using mouse/keyboard I followed the instructions, but WoL isn't allowing me to wake or turn on my target computer. Also, when I physically push the power button to po...

I'm just setting up my TinyPilot. I can see my target MacBook's screen in the web interface. But I can't control it from the web interface. On my target computer, I made sure mirror mode was turned off, and that the TP was set as the Main Display in ...

In the UI, it shows error: The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 128. In SSH, when I run this command, I get this error: pilot@tinypilot:~/ngrok $ sudo /opt/tinypilot-privileged/update...

Hello everyone I've just go the voyager 2 device and I'm trying to get to the web interface. IPs in our network are mac-based. devices do not get an IP unless DHCP knows their MAC address. How can I get the MAC address of the tinypilot? Thank you

It sounds like this might be the same issue mentioned in this thread, but I'm not sure: can't connect Here's what I've done so far: Plugged ethernet into TP. The ethernet port currently has a flashing green light on the left, and a solid orange light...

hello. so i bought this kvm because it looked cool and i need to access my home desktop at work sometimes. but i have a problem, how can i access it at work without setting up a vpn? because my work computer is always on a diffrent vpn(maybe whitelis...

Hello, I just received a tinypilot voyager v2 and am having difficulties. Followed the instructions, but can't get the video signal to work. See screenshot. I double-checked the cable and confirmed that it works properly using a regular monitor. Woul...

I'm running 2.4.1 (with h.264 enabled) and have noticed since upgrading that selecting "Log Out" from the TinyPilot System Menu, it does nothing (ie doesn't log out). Is this isolated to me or is it happening to others?

I just made a dmesg to verify my undervoltage problem was gone (it is) and found this in the logs.. no clue what it means / if its a problem: [1399846.223492] ------------[ cut here ]------------ [1399846.223721] WARNING: CPU: 0 PID: 11 at drivers/me...

Hello I cannot find any documentation to update the keyboard layout to "azerty". Thank you for your help, Emeric

Good morning @michael! I’ve had great success and a lot of use out of the Tiny Pilot for a few weeks now. Unfortunately, when I went to log on to my tiny pilot via the web URL (IP address or host name - ssh is fine) I couldn’t connect to the web serv...

Hi, we currently have a couple of TinyPilot Voyagers and are in a company network and sitting behind a proxy. We would like to update via WebGUI but there is no way to set a proxy via webGUI. I have enabled SSH and set the proxy via command for GIT, ...

Just for knowledge, I am curious to know why tinypilot is using web interface for the remote pc access? If anyone can help me understand this.

I need to hard reset voyager v2 because i forgot my password. Where can i find the iso for it? the ones available dont seem to work

I want to read out keyboard and mouse from a USB port on one raspberry pi and forward this to the TinyPilot switch in the other end. No need for video, audio etc, and also no need for the WEB ui of TinyPilot - just want another hardware end point. Is...

Hello, I have a Tinypilot Pro version 2.3.2 Everything works perfectly (video streaming and keyboard/mouse emulation) However, the keyboard and mouse does not respond during BIOS or boot menu. I am using a HP Z2 Tower G5 workstation with Intel Xeon P...

Hi, Just received my TinyPilot Voyager 2 today. Hooked it up and Ubuntu when loaded is coming through fine. Awesome! Tried to restart and enter the BIOS (Intel Visual BIOS) and get a no signal - seems hitting F2 has gotten me into the BIOS but nothin...

Hello, we've ordered a TP Voyager 2 in February this year. I've just updated the TP to latest Version 2.4.0. Now i can't access the WEB-Gui anymore. I'm able to ping the device but there is no more Web-Gui. Already tried several reboots without luck....

This is an issue that I've been experiencing for a while, since I started using TinyPilot actually, but I'm finally into wanting to work towards a solution. When I visit my TinyPilot, the video displays for what seems to be one frame and then disappe...

Hello I have installed the tinypilot repo on my Ubuntu 20. I am able to access the web browser and see the hostname etc. I am not sure how to check the video and audio data or access the keyboard. Can anyone guide me through how to access the video?

Hello, I am using the TinyPilot Voyager with the VGA to HDMI adapter provided. Based on the logs it seems that it never detects my device. I've tried two different VGA to HDMI adapters. The server is outputting to a splitter with one side going to a ...

I just bought Voyager 2 and it works fine on any other laptop, with any other HDMI cable. But on this particular Lenovo laptop T495, it just doesn't work. It does show the screen for a second perfectly but then it goes black. These are the logs: http...

Hey folks, Thanks for the TinyPilot! I just received my first one. It looks really great. I connected it to my power/network/data/hdmi, but unfortunately I'm not seeing any network activity coming from it on the switch or router. DHCP hasn't talked t...