TinyPilot

I have no signal showing up. I tried a few different HDMI cables. I've tried a few computers with limited results on each. Cable and video work for an external monitor. Currently tried to setup a pfSense box with a Protectli device. I set it up befor...

I have created a video to make things more clear. I get no video detection via HDMI using Voyager. Works fine on next computer. 2nd monitor not seen in device manager (Windows). Computer displays fine to 'real' monitor though. Any ideas? View on YouTube

I'm start the update TinyPilot with: /opt/tinypilot/scripts/upgrade && sudo reboot And get error: ERROR: Could not find a version that satisfies the requirement pkg-resources==0.0.0 (from versions: none) ERROR: No matching distribution found for pkg...

Is it possible to go into full screen mode across two monitors? I'm not looking to capture dual monitors on the TinyPilot, but instead a single monitor across dual monitors from the control machine. I'm able to drag chrome across multiple screens, bu...

Bought 2 TinyPilot Voyager 1 devices Both on current version 2.3.2 with recent full re-image fresh OS After running without HDMI signal input, device falls asleep and doesn't wake again. Required hard power reboot. Does RasberryPi O/S have a sleep se...

Hello, I have a device which does not support HDMI or VGA output. I thought I could replace the HDMI Adapter Board with the Raspberry Pi camera - however it does not seem to be plug-and-play - I still get "no signal" in the web ui. Is there any trick...

@michael As mentioned in the previous thread, I switched over to firefox and now I can get in through the IP address, but the screen is all black except the bottom status bar...

My tinyPilot's red light is on. It is connected to a computer (Ubuntu Linux 20.04) via USB. I have plugged in an ethernet cable directly from ISP router to Tinypilot. I see the Ethernet powers green and orange lights when ethernet is plugged in. http...

Hi, I just purchased this TinyPilot Pro a few weeks ago. It has been working fine until today when I start getting the broken image icon. Keyboard and mouse (within that tiny image icon) still kinda works. I noticed there's a thread having the exact ...

Any chance we might see 3840x1080 resolution support in the future?

Would love to see future integration with Splashtop Streamer. This would allow secure access to your device from anywhere, and access to the controlled computer - even if through a web browser on the device pointing to itself.

When using a slave / controlled PC directly (physically) and when TinyPilot stays plugged into that same PC, ever since the latest update, the mouse will jump back to then dead center of the screen every 10 to 20 minutes. This is SUPER frustrating. I...

Would love to see multi-monitor support enabled using two side by side TinyPilots with synchronous mouse and keyboard support.

TDLR: title question. If not possible I would like to formally request this :-) Why needed: I use a product similar to Synergy where I have 2 PCs & 2 monitors but 1 mouse and keyboard. ( The 2nd PC I keep TinyPilots browser window up, thus controllin...

If the power cable is not long enough, can it be extended using a USB-C extension cable?

Hello, I have bought TinyPilot Power Connector last May, it stopped working. I've been using it with good quality micro usb cables and a 3A charger. It was OK for the first few months, then it started pikvm started showing "yellow voltage sign" but i...

Hi, Today I received the package of TinyPilot 2 and i also tried to connect this with motherboard BTC-S37, screen is showing correctly but mouse and keyboard isn't working, i have also double checked the installation and everything looks fine but the...

I connected to my iPhone via TinyPilot. I displayed the screen with a video capture, but I can't operate it with the mouse. The mouse seems to move a little, but for example, it seems that the accelerator and the brake are applied at the same time. I...

I read on reddit and on this page (https://github.com/tiny-pilot/tinypilot/wiki/KVM-compatibility) that the AIMOS 4 port HDMI KVM would work with the TinyPilot. I purchased the one from Amazon using the wiki link (https://www.amazon.com/dp/B0817YFJKW...

Hello, I am trying to use TinyPilot via remote.it, but the latency is neraly 10-20 seconds with low image quality and low FPS. What can be a solution?

Hey all, We have 8 tiny pilots in use across our multiple locations, all the locations are connected via an internal network. The issue I am having is I am having is I can only connect to one of the 8 via the hostname. I have changed each one from th...

I'm installing TinyPilot on a new RPi 4 running the latest updated version of Raspian OS Lite. The installation script is falling over on the command: /usr/bin/git clone --origin origin https://github.com/tiny-pilot/tinypilot.git /opt/tinypilot givin...

Does the Voyager 2 support POE? I thought it did when I ordered it earlier this month but now I realize it may not… yet?

I have just installed TinyPilot on a RPi Zero W, having made a clean (and updated) install of Raspian Lite. The USB gadgets are not being created. init-usb-gadget fails on boot. *sudo journalctl -u usb-gadget *provides the following: Jan 18 22:05:51 ...

Hi there. I noticed that after about a week being connected and up and running to an always-on system that tiny pilot needs to be power cycled in order to maintain its snappy and responsive performance. Otherwise, things slow to a crawl when trying t...

I've got my tinypilot (hobbyist kit) up and running great. Confirmed by connecting it to my laptop dock and it mirrored my mac pro screen great. the problems begin when i connect to an old mac mini [mid 2011 - A1347 (EMC 2442)] i just get a blank scr...

My tinypilot is connected to an "AIMOS" hdmi/usb kvm. Connected devices use various display mode/resolutions. When switching between devices, the display often becomes garbled, usually like this: After a few seconds, the tinypilot hangs and has to be...

Just as an FYI, here are some items I use that work with TinyPilot: Greathtek 4-port KVM switch: https://smile.amazon.com/gp/product/B08J3W2JYZ/ Port 1: Optiplex 9020; port 2: Optiplex 9020; port 3: PowerEdge T30; port 4: Monoprice 4x1 HDMI switch (s...

Hello all, I'm a newbie regarding TinyPilot, so please bare with me, I have an office that has 6 servers that i want to manage without needing to go to the server room or my boss can remotely(VIA VPN) manage from his home(different state).Would this ...

Hi there, awesome product and software - THANK YOU! Question: Is there any guidance on how to set up a VPN? Use case: I'm looking to have my virtual assistant interact directly with my computer and would need some way for them to access it outside of...

Just got an TinyPilot Voyager 2. Setup with no issues. Easy to reach via browser. Left lower corner of browser window, when at the Windows login prompt, shows green and "connected" However...Keyboard and Mouse work well in Windows even at the pre log...

Hello, I setup TinyPilot for the first time. I'm using a Raspberry Pi 4 along with the TinyPilot Power Connector. The video works fine, but I have no USB input - keyboard (real or virtual) / mouse. I don't see a generic USB keyboard or mouse detected...

I have verified the network cable and hub are all working but I can't get the Ethernet lights to come on the Pi, nor does it show link on the switch. Any troubleshooting I can do or is it a bad Ethernet on the RPi?

Hello there. Just received my new TinyPilot 2 today. However I am disappointed because I am noticing a significant mouse performance decrease on the slave PC (with physical mouse and keyboard usage plugged into the slave, which TinyPilot may think is...

Unscrewing the base, I noticed some hidden display ports within, which are the RPI4's microHDMI which Voyager 2 doesn't expose (curious why now obstructed?). In any case, I cut my own hole (CAREFULLY!) and now have a less-headless device. I installed...

Today Actions > Keyboard Shortcuts includes just one item (Ctrl+Alt+Del). I would welcome the ability to create my own keyboard shortcuts to be passed through to the remote system. For me, I want Win+Tab (or Alt+Tab) for switching active windows on t...

When using the HKS0801A1U KVM mentioned in the KVM Compatability list, I get a black screen on my M1. The aspect ratio appears to be correctly and I can send mouse and keyboard commands. I can see the mouse and keyboard working from another screen sh...

Hi Guys! Just out of curiousity - lets say i have a USB headset that i would like to use with my server without directly plugging it in - is it possible with TinyPilot Voyager ?

I want to make sure my tinypilot cannot talk to the internet in any way and can only work on my LAN. How do I go about this? I understand this means that updates will also be disabled, that is okay. Assume Voyager 2 If I have the ability to VPN to th...

Thanks for a great product. I'm trying it out for the first time. November release Hobbyist kit (minus the prebuild sd card) 16GB sd card built with BalenaEtcher Chromebook either mirrored or extended screens Firefox on Windows used to access https:/...