TinyPilot

I have a use case where I may be given a bootable USB stick to do an OS test build. My TinyPilot is at a remote location, so I cannot plug the USB directly into target host nor TinyPilot rear USB ports, but can instead VPN to the site, get on Tiny Pi...

Hi Recently got the Voyager 2a but my laptop has no HDMI or VGA inputs, has only USB-C type inputs(Dell XPS). Can I use this C-Hub adapter(https://www.amazon.com/dp/B0C1G6DKNX?ref=cm_sw_r_cso_wa_apin_dp_3N7RM1SAMZ3J6KYNYRXX&ref_=cm_sw_r_cso_wa_apin_d...

i know the screen is there when i plug-in a monitor. but using the TinyPilot, just give me "No Signal". i have download the log in word format or pdf format, but it is not "allowed". so how can i submit the log file to you?

I am getting "No signal" on the web interface. dmesg shows repeated message: unicam fe801000.csi: Device has requested 3 data lanes, which is >2 configured in DT Any idea what is wrong?

I'm having issues with my computer connected to my Tinypilot Voyager 2A. It was running fine for a while, but since the past couple days, the keyboard and mouse input would not work. Video can still be captured, but I can't get any input. I tried ref...

I had no problem till yesterday. Out of blue, it stopped working. It wont open on my chrome. Please let me know the process. I tried those but couldn’t possibly do anything to make it work.

Hello - I have a dell 5400 laptop that I use for work. I want to be able to use the tinypilot KVM to access this in the house. It just arrived, and sometimes it will connect and work, but it only does for a couple of minutes and I end up with an erro...

I'm having issues with the Tinypilot 2a when connected to a Dell PowerEdge R730 Server. It has some misalignment issues in BIOS and setup, but when the TrueNAS Scale OS is running its completely unreadble. Here is what I am seeing

I have two TinyPilots using Tailscale and both are "connected" according to Tailscale. When I attempt to access the TinyPilot through Chrome, the site can not be reached. This issue came about two days ago after ~6 months of flawless use on both Tiny...

Hi. I already have a TinyPilot and just want to order the video adapter. I can't see a way to do that on the Products page. Thanks.

Alright, I hope this isn't to lengthy. Currently I am working remote out of country with a VPN router and things have been good. I work 2 jobs atm, 1 uses an RSA token while the other uses a VPN tunnel to log in. - Both going through my VPN router th...

https://logs.tinypilotkvm.com/YoYZiPhk

My local mouse pointer and the remote mouse pointer are not aligned. At first I thought, oh well I'll just watch the remote mouse pointer. However, because of this not aligning, I can't get to the right quarter of the screen nor to the bottom quarter...

BIOS screen is corrupted, changing between black, green and almost unreadable. https://logs.tinypilotkvm.com/8JaLoHjM

Hi there. I noticed that after about a week being connected and up and running to an always-on system that tiny pilot needs to be power cycled in order to maintain its snappy and responsive performance. Otherwise, things slow to a crawl when trying t...

I encountered some issues with my TP so I attempted a factory reset with a USB drive. Still, even with the reset, it seems like it's not loading the web interface. The solid red right is on, same with the orange and flashing green around the ethernet...

Hello, A few months ago, we purchased a TinyPilot Voyager 2a. We use this device to assist our customers with remote Windows reinstallation. Before reinstalling Windows, we need to access and modify the BIOS/UEFI settings of the customer's computer. ...

I know the original use case of this product is very different, however, Is it possible to use this product to give a third party access to a computer...Without introducing any security vulnerabilities? (i.e. can downloads/restarting/etc be disabled?)

Hello, i tried to order tinypilot to Poland but none of my adresses are valid for the system. Is there just no delivery to Poland? If so where i can by it?

Our IT folks do not want people installing devices on insecure networks. I had to plug the TinyPilot into a standalone switch to get the MAC. Why can't these be printed and shipped with the device? I want to recommend replacing our Lantronic Spider K...

Hello support, I have recently purchased a TinyPilot and attempted to update, however, I keep getting this error: I'm not sure how to correct this issue. I did upload the certificate for the browser to function correctly, so that end is taken care of...

Is there a way to do it? I'm trying to but I don't know much about networks and I'm struggling.

It would probably be very useful to have the following quick actions as button icons in the status bar next to connection and streaming protocol status, so we don't have to spend extra steps navigating to these commands, which I do all the time. Past...

Each is asking for a username and password after powering it up. What is the default username and password? Is there another way to login? Thanks, Wayne

Hello everyone, On my TinyPilot Voyager 2a I've got essentially the same issues after upgrading from 2.6.3 to 2.6.4 that were reported in TinyPilot returns 404 after update - after running the update, nginx shows me the "tinypilot isn't running" scre...

Hello, I've installed the community/free version of TinyPilot. I noticed that I am unable to obtain video output from my Intel NUC that I have attached a HDMI cord from the Pi, and then with a dongle (usb > hdmi > to the Pi. Both do not present any v...

Some givens, the laptop is USA tethered to tinypilot and we are trying to connect from Asia. Suddenly experience extremely slow lag on the image this Monday. Completely unusable. From US, I am able to access tinypilot and it works completely normally...

Should we now or in future expect the Microphone transfer like audio? In Voyager 2a we've audio transmission, are we expecting microphone transmission too for this in future? Thanks

Greetings, I have moved all HomeLab onto VLAN 101 on 10.1.1.0/24, and those (mainly Proxmox) are working but the TinyPilot plugged into the same switch with the same VLAN tagging configuration is not working. When I create an offline 10.1.1.0/24 subn...

I can still get into the device via SSH, but the web interface is only returning a 404 screen. I have tried restarting the tinypilot service vis SSH, which didn't help. Reboot doesn't help either. Checking the tinypilot service status via SSH several...

Hi, I have been facing the cursor and keyboard issue on my tiny pilot devices and this took the whole day of mine as a waste, production is going down due to this. Im also attaching the logs and i have tried rebooting the device as well. provide a be...

Can someone help me with the setup. Please

Hello, If i connect my Ipad with USB C Hub with HDMI, Keyboard & Mouse Output and connect same to Tiny Pilot it will work ? My main purpose is to remote control and monitor of IPAD Installed at remote location. Thankx in advance .. Regards, Vipul

Hey, I am connecting to mac using tiny pilot. I have used this belkin usb to type c adapter as my mac does not support usb port. The problem I am having is I can see the display but cannot seem to use my mouse or keyboard. I tried this with my other ...

Hello, I have running piKVM on FriendlyARM NanoPi NEO Plus2 with USB to HDMI capture card 534d:2109 MacroSilicon USB Video OTG USB-A to USB-A cable running on Linux nanopineoplus2 6.1.77-legacy-sunxi64 #2 SMP Fri Feb 23 08:12:53 UTC 2024 aarch64 GN...

Hi there. So i own one tiny pilot with the pro licence, that i used to hold a chair in a company. I haven't been away for more than a week to do a hard test in it's strength; That said i have 2 questions, and please be frank haha; 1 - what are the od...

My job requires me to stay in California while I work from home. I connect the TinyPilot to my work laptop (which is the target PC) from June to Aug 10th, and accessed it using my personal laptop. My work laptop stayed at my home located in CA, and m...

I have set up the TinyPilot and it is mostly fine (though I put the video output through a splitter and it doesn't seem powerful enough to appear on TinyPilot. However, It is ok if I eliminate the splitter, and hopefully an amplifier will fix this.) ...