TinyPilot

Hello Friends Need help with setting up TinyPilot for the first time on my personal laptop. Followed all the steps as mentioned but I am unable to see TinyPilot in IP scanner. Also the TinyPilot in the not showing in Talescale admin window). Tried al...

Hi, i would like to rename the tab name from "tinypilot" to something more common like "laptop1 ...". How can this be done?

Mouse/Keyboard has lag. 5sec-10sec. Sometimes 2sec How do I check if H264 is running properly? I get this message while following the steps in post https://tinypilotkvm.com/blog/whats-new-in-2022-05#enabling-h264-video. My logs https://logs.tinypilot...

I forgot the Tinypilot pro login username and password…how to reset???? I know this is a noob question :)

Trying to run wireless keyboard/mouse off usb dongle that's plugged into tiny pilot? Am I missing something here, I thought in normal hardwired KVM's you plug the USB dongle into the kvm switch and you're done. I'm not getting any output from these t...

Hi all, here’s my situation: J1 requires me to work hybrid, at least 2 days in the office so I’m planning to bring my personal laptop so that I can do both J1 and J2 work on the same machine bought a tinypilot voyager 2 based on my research. So here ...

I'm about to embark on my first TinyPilot installation. I have several systems that I'm wanting to manage, and I'm going the DIY route initially. As I was looking through the instructions for VGA capture, I see that the typical solution is a VGA to H...

I just reflashed my TinyPilot Pro to 2.5.0 after I could not get it to work I wanted to set a static IP but I did not want to have to put this TinyPilot on the Internet just to download a script to apply the static IP address as shown in this post: h...

Hi, Got a voyager pro connected to an industrial windows 7 computer with a Quadro K620 that has DVI and Displayport output. Local display is using DVI and duplicate display is output using a couple of adapters through displayport->DVI->HDMI->TinyPilo...

Hello, I am unable to use POE on my voyager 2. I hooked it up with internet and it looked like theres no power unless theres the USBC power

Happy holidays from the TinyPilot team! Over the next few days, the TinyPilot team will be taking some well-earned time off - including the support team here on the forum. You're more than welcome to continue posting and asking questions, but respons...

Hello, I have a specific use case in mind, one of our contractors needs remote access to an HMI panel with only USB and Ethernet ports. The USB is for the Mouse and Keyboard and since the panel has no video in/out I would like to use an HDMI camera a...

I am using the GUI to try and upgrade. This issue I am having is that the upgrade says it is successful, but even after a reboot of the Voyager, it says it is on 2.4.0 and that upgrade to 2.5.0 is available. I have run through the upgrade process 3 t...

Hello, we have a KVM-Matrix-Switch here in our Company. In our Office we are eight people with only one KVM and Monitor. So we decided to buy a tinypilot, to put the system into browser. The Guntermann and Drunck DVI-CON is the end of the KVM-Matrix,...

( Using tinypilot voyager 2 with and without Tailscale). JPEG settings to max. Having rly big issue with reading text and poor resolution. Laptop with TinyPilot voyager 2 1080p over Ethernet. Can HDMI cable affect this? Tested on local network and th...

Hello, I just setup my Tiny Pilot, I see the quality is really bad. My internet speed is 260/300 mb. The laptop resolution is 1920x1080. The text is especially bad. Its readable but horrible quality.

Hello, my remote mouse control has stopped working. I tried connect tinypilot to a different host USB port but no improvement. Also rebooted Tinypilot to no avail. Will appreicate any guidance. Thanks

I normally use VNC Viewer to connect to Raspberry PI at university because I can't configure firewall to connect any other way. Would it be possible to connect to the TinyPilot remotely using VNC Viewer (or some other internet connected option)?

Hi folks, Checking https://github.com/tiny-pilot/tinypilot/wiki/KVM-compatibility I see the top recommendations are out of stock. Does anyone have a working, in stock KVM for 4+ servers that they can share? Thanks!

first of all, Merry Christmas @michael and @cghague I know you're busy building a successful business and all the likes, and there are multiple use cases for a TinyPilot - one of them that seems most common is expanding the use of it to multiple devi...

How do I set up/connect to TinyPilot Voyager 2 on telephone hotspot. I am now in US Hotel and it has browser room login. I am out of country don't have my own router/isp. Any other cheap options to set it up need to check if it is suitable for my use.

We're currently designing TinyPilot Cloud, a service that gives you secure, remote access to your TinyPilot device from anywhere in the world. We'd love to hear your feedback! What features do you want to see in TinyPilot Cloud? What questions do you...

I tried to find the version on the Web GUI to include it on here but I could not find it.

Hi All, I'm attempting to transfer an ISO to the Voyager2 for the first time and it keeps crashing at ~50%. Is there a limit or something. What I'm uploading is about 5.5 GiB in size. Thanks

Good Afternoon, Just started working with My Voyager2. I hooked it up to a laptop, ensured the laptop was displaying to an external monitor during POST. But when I entered BIOS it seemed to duplicate the image a bit on the left and right hand side. I...

When I was using the non-pro version of TinyPilot, I could use tinypilot_external_port: in settings.yaml to specify the port. I tried that with TinyPilot Pro and it doesn't seem to work. I added that to my settings, then ran the install script again:...

I've had a Tinypilot since March since I began my software consulting journey. As I settled into my roles, the use for an IP-KVM waned, but I liked how the TinyPilot worked out of the box. I let it collect dust since February. Recently, the need to c...

Hello, When I connect to tiny pilot I am able to see the scree of the device and it mirrors the device properly. However at the bottom left of the screen it says Disconnected and I am not able to control the device. The same issue happens when I conn...

Looking at this device… I’m assuming it is a basic rpi with your custom OS. And a few security upfits. Would I be correct in the following assumptions— It will use default gateway routing for remote routing say over a VPN. Ip chain functionality via ...

Hello everybody, we're thinking of buying a TinyPilot, but we'd like to understand certain aspects of the device and the software before. 1. Security of the transmitted screen image stream We have understood that the TinyPilot offers a Web Interface ...

Hi all. I recently purchased two Voyager 2s. I have been using TInypilot (non-pro) software with RPI4, self bought HDMI dongle and a USB-C data/power splitter from Tinypilot. Software-wise, I have my RPI4 set up exactly the way I want to. I want to r...

Is there a possibility to add (From TinyPilot) USB A to USB (or RJ 45) console serial cable support? This way the TinyPilot could connect to serial-based devices and provide an out of band function? This could include a USB to RS232 FTDI chip support.

I want to use this for servers that only have VGA outputs, and the HDMI works fine. I've tried powering the VGA adapter on the computer and with its own power supply. Please assist as soon as possible, this is useless to me without VGA.

Hi, Just wanted to check if VNC is something in the pipeline for Tinypilot. I have asked this before and it seems the answer is that it will take several months and may not be priority. Given all the enhancements, is it something doable now or can be...

I got my Tiny Pilot today, but unfortunately it's not usable. The case and the Pi4 are pretty badly damaged. Frankly, it's only partially the shippers fault, the TP was only packaged in one layer of bubble wrap in a single layer cardboard box. I can ...

I’m using your Tinypilot software and I came across one issue. I connect to the remote laptop using tinypilot's web interface. USB on the go forwards keystrokes to the laptop and almost everything works fine. I can use shift and control keys (except ...

I have a 1040 G9 that won't except keyboard until windows is booted and trying to get it booted to Bios, how can I solve this?

I have a 800 hp G9 that boots to Bios but never displays bio screen/ menu

Hey Team, Till yesterday it was working perfectly fine since today morning all of a sudden tiny pilot doesn't show up in the network. the URL is not reachable nor I can see it on the router map. I can see on the tiny red light on and the ethernet lig...

Well, difficult to explain the problem. I bought two pilots. Two laptops, each of them is connected to one pilot. Both laptops are duplicating their screen into the hdmi signal. Laptop 1 has 1920 x 1080, Laptop 2 has 1920 x 1056. Laptop 1 is displaye...