TinyPilot

I discovered the Wake on Lan feature after reading this thread: can't wake computer using mouse/keyboard I followed the instructions, but WoL isn't allowing me to wake or turn on my target computer. Also, when I physically push the power button to po...

I'm just setting up my TinyPilot. I can see my target MacBook's screen in the web interface. But I can't control it from the web interface. On my target computer, I made sure mirror mode was turned off, and that the TP was set as the Main Display in ...

In the UI, it shows error: The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 128. In SSH, when I run this command, I get this error: pilot@tinypilot:~/ngrok $ sudo /opt/tinypilot-privileged/update...

Hello everyone I've just go the voyager 2 device and I'm trying to get to the web interface. IPs in our network are mac-based. devices do not get an IP unless DHCP knows their MAC address. How can I get the MAC address of the tinypilot? Thank you

It sounds like this might be the same issue mentioned in this thread, but I'm not sure: can't connect Here's what I've done so far: Plugged ethernet into TP. The ethernet port currently has a flashing green light on the left, and a solid orange light...

hello. so i bought this kvm because it looked cool and i need to access my home desktop at work sometimes. but i have a problem, how can i access it at work without setting up a vpn? because my work computer is always on a diffrent vpn(maybe whitelis...

Hello, I just received a tinypilot voyager v2 and am having difficulties. Followed the instructions, but can't get the video signal to work. See screenshot. I double-checked the cable and confirmed that it works properly using a regular monitor. Woul...

I'm running 2.4.1 (with h.264 enabled) and have noticed since upgrading that selecting "Log Out" from the TinyPilot System Menu, it does nothing (ie doesn't log out). Is this isolated to me or is it happening to others?

I just made a dmesg to verify my undervoltage problem was gone (it is) and found this in the logs.. no clue what it means / if its a problem: [1399846.223492] ------------[ cut here ]------------ [1399846.223721] WARNING: CPU: 0 PID: 11 at drivers/me...

Hello I cannot find any documentation to update the keyboard layout to "azerty". Thank you for your help, Emeric

Good morning @michael! I’ve had great success and a lot of use out of the Tiny Pilot for a few weeks now. Unfortunately, when I went to log on to my tiny pilot via the web URL (IP address or host name - ssh is fine) I couldn’t connect to the web serv...

Hi, we currently have a couple of TinyPilot Voyagers and are in a company network and sitting behind a proxy. We would like to update via WebGUI but there is no way to set a proxy via webGUI. I have enabled SSH and set the proxy via command for GIT, ...

Just for knowledge, I am curious to know why tinypilot is using web interface for the remote pc access? If anyone can help me understand this.

I need to hard reset voyager v2 because i forgot my password. Where can i find the iso for it? the ones available dont seem to work

I want to read out keyboard and mouse from a USB port on one raspberry pi and forward this to the TinyPilot switch in the other end. No need for video, audio etc, and also no need for the WEB ui of TinyPilot - just want another hardware end point. Is...

Hello, I have a Tinypilot Pro version 2.3.2 Everything works perfectly (video streaming and keyboard/mouse emulation) However, the keyboard and mouse does not respond during BIOS or boot menu. I am using a HP Z2 Tower G5 workstation with Intel Xeon P...

Hi, Just received my TinyPilot Voyager 2 today. Hooked it up and Ubuntu when loaded is coming through fine. Awesome! Tried to restart and enter the BIOS (Intel Visual BIOS) and get a no signal - seems hitting F2 has gotten me into the BIOS but nothin...

Hello, we've ordered a TP Voyager 2 in February this year. I've just updated the TP to latest Version 2.4.0. Now i can't access the WEB-Gui anymore. I'm able to ping the device but there is no more Web-Gui. Already tried several reboots without luck....

This is an issue that I've been experiencing for a while, since I started using TinyPilot actually, but I'm finally into wanting to work towards a solution. When I visit my TinyPilot, the video displays for what seems to be one frame and then disappe...

Hello I have installed the tinypilot repo on my Ubuntu 20. I am able to access the web browser and see the hostname etc. I am not sure how to check the video and audio data or access the keyboard. Can anyone guide me through how to access the video?

Hello, I am using the TinyPilot Voyager with the VGA to HDMI adapter provided. Based on the logs it seems that it never detects my device. I've tried two different VGA to HDMI adapters. The server is outputting to a splitter with one side going to a ...

I just bought Voyager 2 and it works fine on any other laptop, with any other HDMI cable. But on this particular Lenovo laptop T495, it just doesn't work. It does show the screen for a second perfectly but then it goes black. These are the logs: http...

Hey folks, Thanks for the TinyPilot! I just received my first one. It looks really great. I connected it to my power/network/data/hdmi, but unfortunately I'm not seeing any network activity coming from it on the switch or router. DHCP hasn't talked t...

Hi, I installed PinyPilot yesterday manually on this Raspberry 4: cat /etc/os-release PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)" NAME="Raspbian GNU/Linux" VERSION_ID="11" VERSION="11 (bullseye)" VERSION_CODENAME=bullseye ID=raspbian ID_LIKE=debia...

Hi, I'm trying to update the TinyPilot pro software on my Pi 4 (8gb) running Ubuntu 20.04.4 LTS (64 bit). However I get the following error message: 64-bit Raspberry Pi OS is not yet supported. Please use the 32-bit version of Raspberry Pi OS. ++ una...

https://logs.tinypilotkvm.com/LRK2YCzp

I just recently updated Tiny Pilot to the latest version available, and after I did, it would appear that tiny pilot is not completely capturing mouse wheel scrolls. Before updating, if I used the mouse wheel scroll inside the remote window, the mous...

Connected tinypilot to a Reolink NVR - pointer only seems to move ( belatedly ) if I hold down spacebar. Trouble shooting steps: Rebooted tinypilot, rebooted NVR, upgraded tinypilot to latest version Logs: https://logs.tinypilotkvm.com/QRLOGumc

I bought Tiny Pilot from punkt.de on 25.10.2021 with order number 1060, but with this data i cannot download. please submit a download link

I'm using a TinyPilot pro via the VGA-Adapter on a Precision R7910 that I have to admin remotely. Unfortunately, the server does several graphic mode changes while transitioning through BIOS, before landing on a text console. The mode changes appear ...

Hello, I am trying to port a tiny pilot on the iMX8M Mini board using Yocto. I have referred your GitHub Repository https://github.com/tiny-pilot/tinypilot wanted to know it is possible to port Tiny pilot for iMX8M Mini. if yes, can you suggest to me...

Hi, am trying to access tinypilot on cloudflare tunneled network. My goal is to access using private IP address of the tinypilot on the other end of cloudflare tunnel. So, the tunneling is working, i confirmed playing a video file on a server connect...

Hi, I purchased a TinyPilot voyager with the VGA option and the Poe for a remote site. So it was shipped directly to the remote location, and im going to have a none technical user plug it in to a new computer. I was wondering if the TinyPilot packag...

Hi, I am trying to build a tiny pilot on iMX8M Mini. referring to the git repository of the tiny pilot and google it out but failed to get an appropriate link regarding for same. can anyone help me in this case? what changes should have to do from th...

I need to download tinypilot image for factory reset. I'm unable to download with this link: https://tinypilotkvm.com/pro/license-check It is too slow and never downloads, fails with network error. Is there any other way like torrent etc .. ? Thanks....

Hello, I can see everywhere on the website the word server. Manage your server, work with your server, USB port on your server. I want to find out if Voyager works or might work with any other hardware, not-server. :-) For my scenario, I have a HMI t...

Hi - I powered off my server and disconnected it from my TinyPilot. I didn't change anything HW or SW related in the server, but when I reconnected the TinyPilot, it no longer shows the video feed, it just shows the "broken image" icon. I've restarte...

Hi, This feature is important to keep the computer awake if it goes into sleep after sometime of inactivity. This feature can be enabled / disabled at anytime.

Does Vovager 2 able to mount multiple virtual media at the same time? I need to mount the ISO file to boot and second virtual media for driver installation. Can this be done? At the moment, I can only mount one virtual media at a time.

I have special windows computer control 1 keyboard and 1 mouse and dedicated USB port (for industrial Joystick). So my computer has 3 usb port for keyboard mouse and joystick. TinyPilot can control keyboard and mouse but I wanna also control remotely...