TinyPilot

Wow ! That almost drove me mad trying to authenticate myself using my password manager ! hahaha Just realized that our newly acquired Tiny Pilot Voyage (not V2) with latest firmware 2.3.1 substitutes characters during a simple copy paste from host to...

Hi. I have followed the instructions mentioned here https://tinypilotkvm.com/faq/change-edid to change the name and entered the commands as is. However, the display name in the Mac is still showing as TinyPilot. Is there any thing additional that I h...

Hello. Is there any way that we can cut and paste, from one computer to another where the other the one under Tiny pilot

Hi there. I found TinyPilot online while searching for a solution that would be able to remotely control and view 4x bare metal 1L PC’s at a full bios/boot visibility level. I have these going into my home server rack - they are based in the rack alo...

I'm hoping to remote control to a workstation that requires Cisco AnyConnect to log in. Would I have any challenges using TinyPilot?

I recently bought TinyPilot , Initially I had issues with Latency but ever since i switched to H.264 the latency issue is no more but now I have new issue where monitor keep disappearing after few seconds I can still see the keyboard . I am using chr...

Hi, I am trying to install TinyPilot on Raspberry Pi 4 Model B 2 GB RAM. I installed the Pi OS Lite 64 Bit. When I run the install with below command as root, curl --silent --show-error https://raw.githubusercontent.com/tiny-pilot/tinypilot/master/ge...

Hi, I just noticed, that I cannot find a way to get the "@" (at) sign used on a machine that is connected to the TinyPilot. What works: a.) Pressing directly (no TinyPilot involved) the @at sign on the remote machine (remote: machine where TinyPilot ...

It was all working fine, all of sudden I was getting no video signal. There was nothing changed on my target computer. So far, I replaced all the HDMI cables and did factory reset also, still same error. Anyone can quickly help, I would appreciate it...

Hello, I have a tinypilot pro, that isnt completing the update from 2.5.0 to 2.5.4 Here is a link to the log file: https://logs.tinypilotkvm.com/GDtZJMb0 please let me know how to resolve. Thank you!

I often have to work on machines remotely that have dual or multiple monitors. Does TinyPilot support this function? Thanks.

https://logs.tinypilotkvm.com/ipW5dz0v

Is there any way that we can copy and paste from target system to the source system while using tinypilot device ?

We need to mount a USB Stick or directory for data transfer. In real life our users take an USB Stick for data Transfer, but if they are in Home Office it would be better if thy could use a file share.

Kindly let me know if anyone made any step by step instructions for this jackstrip audio streaming to the target computer.

Let say if i change host name from Tinypilot --> system --> Hostname --> tinypilot to otherhostname. But now i forgot and not able to reach to tinypilot UI. Also SSH is not enabled. I blocked on my work please anyone can look into it?

Hello, I just purchased a Pro license and installed the hobby version on this hardware: https://geekworm.com/products/pikvm. (HDMI Full HD capture based on the TC358743 chip) I am able to get to the Tinypilot Pro webpage but there is no video. Screen...

What security option can be enabled to secure the tinypilot from access? To prevent vulnerabilities and exploits and injections? Are there ways to monitor if an ip I'm not aware has accessed it? I already use the username sign in and https, but that ...

How to flash tinypilot itself and not a usb or microsd card? how can i download the previous version 2.5.3 that worked for me? When i click download it keeps downloading 2.5.4 any help appreciated

After a reboot the tinypilot will not come back online - its seem that the Flash memory is corrupted. The device responds to pings but no services seem to be running

As in screen after every reset screen isnt loading. Web browser is showing this error Failed to load resource: the server responded with a status of 502 (Bad Gateway) The one solution i found is going to system > video settings and changing frame rat...

i need to physically have someone type in the bitlocker password onthe device i have my tinypilot hooked up to in order to get passed the bitlocker key. this surprised me as every other sort of hardware lock it can pass but not this one. anyway aroun...

System is not responding to webbrowser. Errors as below repeatedly in syslog. Can access via SSH, but am not local to system so unable to do factory reset. Suggestions? May 12 10:44:56 0200707e systemd[4211]: tinypilot.service: Failed to execute comm...

I have been using the Tinypilot Voyager 2 for over a year now and am really liking the product, especially since the video format update. Unfortunately I have been experiencing severe noise levels for the last couple of weeks now that keep getting wo...

I was looking at log data with over 50 columns and with the font very small, this caused tiny pilot to freeze. Could the encoder have a problem rendering the data. I rebooted the server and had the same problem. I had to pull the hdmi cable out, and ...

I know that TinyPilot does not stream audio to the browser. However I noticed it creates a display audio output (presumably the HDMI port?) and there is also a 3.5mm jack on the device. Do these do anything at this time? It would be perfect if I coul...

It would be nice to have an option to turn off and/or lower the sound when using the H.264 encoding

Hi everyone, owner of 8 tinypilots and love the hardware! I have a question though, we can stream incoming audio from a client device, but is there a way we can send audio to device ( as a mic input) Anyone have any ideas here? I was thinking maybe s...

Tinypilot KVM display works intermittently, out of the blue it would display "No Signal", and then start working sometimes, other times it will show a green screen without responding to anything. Logs: https://logs.tinypilotkvm.com/1UQtmKpi

TinyPilot facing issue 502 Bad Gateway nginx/1.18.0 When tried setup again getting this

TLDR :: When this occurs after 36h of uptime since this new 2.5.4 clean install (didn't occur 2.5.2). My logs show : Persistent Device Timeout (unplugged) Question 1 - As preface: Are there any currently known issues with reverting to the old EDID of...

Per here (from OS Ver 10) - Renaming the device, Device shows under Mass storage device - #post-5 I recall being able to run commands (like sudo or logging into root user) locally in the previous OS version. Is this still possible or not so? I tried ...

Tried to update the tinypilot software. Something went wrong during the process and now I can't login to the web interface. I have SSH enabled and can get in to that, but I don't know what to do once I'm in. Help!

I'm curious to know if I can control just the mouse and keyboard and disable the video capture card "Toshiba H2C" so its not being identified by my MAC. Right now it shows I have a TinyPilot Display and then also shows Toshiba H2C and also shows my a...

Is there any way that we can change fan speed of the tiny pilot?

I was reviewing the forum for SSH related changes that can be made to TinyPilot and wanted to change some settings via SSH but found out I could not even SSH in macOS Monterey. My TinyPilot works fine otherwise. Anyone else encounter issues with macO...

I rand the upgrade on my Voyager and it froze half way through. It was then giving an error of "Error: Missing expected kind field" when I tried to run the updates again. It has been rebooted and I'm getting 502 bad gateway. I then was going to downl...

I just received my new TinyPilot Voyager2, connected it to one of my servers (same model as I will have at a remote site where I plan to deploy this TinyPilot), connected the VGA-HDMI adapter (purchased alongside the TinyPilot), and I can send keystr...

Im running the mouse move script via putty. Once every 24 hours or so I have to restart the tiny pilot because I start losing control of the MAC its connected too. Is there a way to set an automatic restart up until this issue is resolved?