TinyPilot

Dear Sirs I'm going to install a TinyPilot Voyager and power it via a PoE splitter. Can I discard the Power Connector altogether and use a front USB port for keyboard and mouse traffic? Thanks and Regards Mauricio

What are the best methods for powering the VGA-to-HDMI adapter with the USB cable? Powered from Tiny Pilot? Powered from target? Powered from external power? For us, from target is easiest, but we had one adapter that was failing at the Ubuntu instal...

Is there a way to sftp the virtual images to the tinypilot? they keep failing to upload when i try to upload from my laptop via the web interface

Hi. I'm new to the Pi. I thought I knew what I was doing and SSH'd to the tinypilot. I ran the apt update to update everything, rebooted, and now the Tinypilot doesn't respond to the tinypilot URL. I have a solid green and red light. I took out the S...

Hi Michael, I'm in awe of what you've built here. Reading your development journey and then building products and a company around what is an amazing solution is really inspiring! I hope it all goes well for you! Also thank you for keeping a free ver...

@Michael... We just bought a brand new TinyPilot at our studio for me to be able to do remote booting tests, change bios parameters, etc. Our studio is located in Madrid - Spain, and I'm in Vancouver - Canada, so I need a kvm over ip solution. After ...

Just got my TinyPilot and connected it up to a server to try to test it out, but the network on the TinyPilot never seems to get going. I tested the port with a laptop and was able to get DHCP and everything just fine. When I plug the network back in...

With NumLock off on my keyboard, when I push the "left arrow/ 4" key on the right half of the keyboard, in the lower right of the browser it says "ArrowLeft", but on the remote PC it types a 4. If I turn "NumLock on" on my keyboard and push the "left...

Hello, I have installed my tinypilot today, which works fine for video capture, keyboard input and mouse clicks. But it doesn’t work with mouse movements : I don’t see the cursor moving, either on the web page or on the remote PC. With the help of th...

I have set my unit up with a KVM physical switch like the youtube video by DB Tech. It was working as expected. I just did the update to 2.5.5 and now I'm getting no signal from either video source (input 1 or 2 on the KVM) I have physically cold boo...

Hi Folks, Just received my TinyPilot Voyager and have been trying to set it up using the VGA adapter which I purchased with it. I'm having problem getting video signal to come in, the only clean view I've seen is the Windows loading screen. Thought I...

Hello, Does TinyPilot come with an active firewall. I want to setup access from the Internet via a port forward but need to make sure it's not getting blocked internally. What sayeth the group? Jay / CompuMatter

Is there reason why the storage would keep getting full? This is the second time the space is full on this device. Last time it happened, I had to reinstall the tinypilot in order for it to work.

Hello, Is there any way how to boot Windows.iso? Linux works, but Windows doesn't. Mount mode is flash drive. CD-ROM mode not working either.

I’m planning on buying and using the TinyPilot Power Connector with an Apple 20W USB-C Power Adapter (which supports 5V ⎓ 3A output as required by the Raspberry Pi 4B). Looking at the product page for the TinyPilot Power Connector, it seems to have: ...

The target computer does not have a usb port , There is no way to use Tinypilot Is there any solution?

Can mouse / cursor position input be mirrored to the target computer through the Tinypilot? Also can simultaneous key combos e.g. shift + something be sent easily? Also wondering what the device & drivers are displayed as on the target computer. I ha...

Hello, I am considering buying TinyPilot to control an NVR that will be too difficult to reach for a lazy guy like me, and the pros of potentially being able to control it from any browser around the house (and beyond) makes me drool. TinyPilot is go...

Hi, new TinyPilot user here. I am seeing a rather high latency (5 - 30+ seconds between pressing key and it registering on screen) even when average latency is 10ms with 0% packet loss. I am connected through a gigabit ethernet switch. I see a lot of...

After setting up the hobbyist kit version of your device, I learned that TC358743 based capture cards reduce the blur of usb based ones. I thought I might order a compatible card and saw the instructions on enabling support. I though I might as well ...

The product looks good, but I'm not clear how it should be installed. Can I use one Voyager to control many servers, or do I need one voyager on each server I wish to control, and use a browser to access each server?

Hi - KVM novice here. Watched Jeff Geerling's video on TinyPilot, and wondering if a remote hard-reset would be possible for a Surface Pro tablet (either stand-alone, or with a docking station setup). Thanks!

#1 issue Size Cap? I read there is a TinyPilot Virtual Media size cap Each .ISO (or .IMG) can be no larger than 2.1 GB. Is there a cap? If yes, what is it? #2 Media mounted in running OS does not work HirenBootCD and any other disk I try simply does ...

I have TP Pro. I have tried unit on 2 laptops and a desktop. Cannot see BIOS (during reboot). Post BIOS, I can seen normal Windows bootup.

In case this helps others. I tried to update TinyPilot software via Web UI and it failed. I logged in via SSH and ran /opt/tinypilot/scripts/upgrade. Output said file not valid yet and updates for this repository will not be applied. Google said to c...

This week, we published the September 2021 release of TinyPilot Pro. It adds several features including: Wake on LAN Streaming update logs Keyboard shortcuts for Ctrl + Alt + Del CD-ROM mode for virtual media For full details, see the announcement bl...

My KVM Switch usb ports only has separate ports for Keyboard and Mouse. Is there anyway to split or repeat the USB from the Pi so I can plug into Keyboard and Mouse? Just to note my Pi works in either Keyboard or Mouse plug it only controls either th...

How to reduce resolution to 800x600? I am using Tinypilot pro version. If possible pls share how to do that in Tinypilot community version also. Thanks

I've managed to increase the ustreamer capture resolution to 4096x2160 using another usb capture card and editing ustreamer.service, but the image size on the webpage is still displaying at 1920x1080. Is it possible to increase the image size on the ...

Hi, I am using this awesome tool and I am loving it. when I want to access tiny pilot from outside my home network and I use my iPad browser (chrome, firefox or Safari) I experiance unbearable slowness, so I decided to connect to a virtual machine in...

Tried to update using web gui and via SSH error via SSH: E: Repository 'http://raspbian.raspberrypi.org/raspbian buster InRelease' changed its 'Suite' value from 'stable' to 'oldstable' N: This must be accepted explicitly before updates for this repo...

I'm controlling a Chromebook remotely from a Windows 10 computer through Chrome (holy inception, Batman!). The Chromebook seems to interpret the TinyPilot HID device (/dev/hidg1) as touch input. When I wave my mouse around on the Windows 10 computer,...

The TinyPilot Voyager looks really tempting, but I would like a higher resolution, maybe even DisplayPort input instead of HDMI. Is there any chance of you doing something like that?

I have a raspberry pi 4 with raspbian 10 installed. I tried downloading and installing tiny pilot on it from the instructions here: https://tinypilotkvm.com/blog/build-a-kvm-over-ip-under-100#how-to-build-your-own-tinypilot It appears to download and...

Hi, Just received my device and hooked it up to the AIMOS 4 port KVM I bought in anticipation of using it with the Tinypilot. So I've hooked it up, and added a powered HDMI splitter. I've booted and it's all looking good - but a couple of issues pres...

This is the error i get for https on my TinyPilot. Is there anyway to make this go away?

I hooked up a GoPro to the hdmi input on the pilot and I’m getting a lot of latency in the video transmission. Could it be the camera itself, and do you have any suggestions for ways to minimize the latency in the system?

Hello, first of all, thanks for the build :) I installed it on a PI rev B with power adapter 2A :( I have the screen, the icon "connected" but when I click on the keyboard nothing happens. Did I miss something ? Many thanks

Hi, My boss ordered a tinypilot voyager for us, but it didnt have tinypilot pro preinstalled, where can we download this image? Br Jacob

With a cdrom virtual image, windows suggests formatting the device, boot fails. Please add a choice between cdrom and removable media. Works with PiKVM selection cdrom instead of flash.