Welcome to the TinyPilot community!
You can ask questions, make feature requests, or share neat things you've done with your TinyPilot.
Welcome to the TinyPilot community!
You can ask questions, make feature requests, or share neat things you've done with your TinyPilot.
Topics, recently active first | Category | Users | Replies | Activity |
---|---|---|---|---|
Not sure why keyboard still doesn't work for me I ran the update to the latest version as of a few minutes ago but still get nothing at all either via the soft keyboard or from my hardware keys forwarding. Likewise no cursor movement. Any common gotchas for me to check? Since it doesn't appear to ... | Technical Support | R | 3 | 2021-03-24 20:21:06.805Z |
Latest update disabled my ability to remotely control my computers. So with the set up I have, is a POE Hat, and a USB 3 cable with the V+ blocked and plugged into the PC from the USB Power slot of the Pi (4 Mdl B). This setup was working for me before I updated to the latest version and then I no longer have the abi... | Technical Support | GJTR | 8 | 2021-03-22 12:57:41.016Z |
Two Preliminary Questions Can TinyPilot be installed on a Raspberry Pi that contains minimal pre-existing software on the device? Currently I'm running a RPi 4 2GB with PiHole and a few minimal scripts. Can I install the TinyPilot alongside this software, or does TinyPilot ne... | General | C | 4 | 2021-03-19 22:49:52.021Z |
Hobbyist Kit vs Voyager I undertand the Voyager is finished - plug and go kind of solution. But with the Hobbyist kit you need too be comfortable to build and configure things. Beside that big difference - are there usable feature differences? | General | S | 1 | 2021-03-16 21:28:38.329Z |
Enter on Num Pad - TinyPilot Voyager When I am using the old TinyPilot I had, enter on the num pad worked fine, but now when I push the enter on the num pad it looks like below. This is where I pushed the normal enter key, then the num pad enter key 4 times then the normal enter key. Fo... | Technical Support | A | 4 | 2021-03-08 23:30:54.397Z |
Tiny Pilot Pro Http Server, Caddy Http Reverse Proxy, and Logging into TinyPilot within an iFrame Wanted to share a discussion I had with Michael so that others with a similar environment can benefit. In my environment at home, I'm running Home Assistant (https://www.home-assistant.io/). Home Assistant is basically my portal to controlling everyt... | General | P | 1 | 2021-02-26 20:45:57.167Z |
Possible to remap the ESC key? The escape key takes me out of full screen. Is it possible to remap this to another set of keystrokes? | General | S | 1 | 2021-02-18 20:54:18.719Z |
Can't insert a period? Hello all. I just received my pilot today, and it was a very painless setup. However, I'm unable to insert a period. This is in firefox (chrome won't allow me to bypass the SSL error). If I hit the period key on my keyboard or on the soft keyboard, i... | Technical Support | DD | 6 | 2021-02-17 10:58:23.268Z |
10 sec+ Latency w/ Full Raspbian OS I installed Raspbian OS, used USB HDMI capture device and was experiencing over 10 seconds of latency on the video feed. I reached out to you via e-mail and you suggested maybe trying the CSI bridge. Ordered and installed today. I was thinking that w... | Technical Support | DD | 7 | 2021-02-12 23:12:17.376Z |
Videogame console controller USB passthrough? I came across your Tinypilot KVM while looking for a remote control solution for videogame consoles (PS4, Xbox, Switch, etc). I've tried several KVMs and while they're all capable of streaming the video, most fall short when trying to control the con... | Technical Support | B | 1 | 2021-02-12 22:21:04.069Z |
Explain icons... |