TinyPilot

Hello! I bought a device recently and generally I'm happy, but there are some limitations which webview is having. Say, I cannot use Alt-Tab to switch apps. I cannot really open it in fullscreen (it says "to return press Esc" and of course while I'm ...

I've recently updated my tinypilot with factory reset. But it's unable to transmit audio on mac. What should I do?

Can I connect to the TP with some native VNC client like this https://www.realvnc.com/en/connect/download/viewer/ , and if not - why?

Hello, I am not interested in audio capture but am interested in modifying the EDID. Can I do that with the older model? Also, besides audio capture and case differences what does the 2a have that the 2 doesn't ? Thanks,

Hi, I am using HDMI to HDMI cable. My video quality is poor then target laptop to personal laptop. How can I improve high resolution video using via HDMI?

Let me start by saying that I've run through most of the previous forum entries on the No Signal issue. I've created a shareable link of logs. https://logs.tinypilotkvm.com/2E7NjSo3 I'm also attaching build details. This is the TinyPilot Hobbyist ver...

My WebUI is was returning: "{"code":null,"message":"The database file is not compatible with the current version of the app."}" I did a re-install with: curl -L https://tinypilotkvm.com/[redacted]/install.sh | sh && sudo reboot `` Now the when tryin...

Hello sir I am very new to the KVM space. Looking for suggestions. My requirement is below: I have a mac book pro and a HP windows laptop with a wireless mouse and keyboard in usa. HP windows laptop hosts a zoom call and share screen and grants contr...

I purchased a VGA to HDMI adapter along with my Tinypilot Voyager 2A. I am to get an HDMI machine to stream audio ok but if I use a machine with the VGA to HDMI adapter it doesn’t work most of the time. On a few occasions, it plays audio out of the b...

Background: I use tinypilot to control 4 computers remotely. I have been doing this from my office, which is in a different room from the computers, as well as to use TailScale to remote in while away from home. I have been using this setup on my PC ...

I need to install a driver for a wifi adapter on the host computer that currently has no internet source. Is it possible to download the driver onto the tinyp and then get it to the host and installed through the tinyp? Or do I just need to connect t...

Hello, I just renewed my Tinypilot pro license so that I can reimage the raspberry pi but I am still getting this error when I try to update. "Error: Failed to request latest available version: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certific...

TinyPilot is awesome. We need it. But there are some shortcomings that will, I hope, be resolved eventually. Use case - I have 2 kids and I have to do things as a dad, yet I have to work. Tinypilot allows me to access my work computers from my Micros...

TinyPilot v2 screen flickering on macos? how to fix this. i have old of them v1 working fine

Was working properly untill yesterday, suddenly the UI went down. Please help

I've got my Tinypilot Voyager last december via punkt.de. In my logs I now get messages about Under-Voltage. How is this possible? I'm using exactly the components that where shipped.. [ 6.875685] Under-voltage detected! (0x00050005) [ 27.673651...

Hi, I'm trying to update my Tinypilot pro from 2.5.0 to the latest version. I tried two times through the web interface and just got an error, so I tried again through ssh. Upgrading stops in the ansible step: TASK [ansible-role-ustreamer : check if...

Being able to set a static IP address or switch to DHCP via TinyPilot's web browser UI. Can't believe this was not thought of. I know it can be done via command line but, come on guys, how hard would it be to add it to the UI? TinyPilot's inability t...

Hi, I just purchased the TinyPiloy Voyager 2a (non-PoE version) and I want to somehow use it with my 4-port Tesmart KVM switch so I can have KVM access to multiple PCs that are connected to the Tesmart KVM. I read a few posts on how this can be done ...

Hi, I just upgraded to 2.6.0 and now I'm having video issues that I wasn't before. It was working like 2 versions back (2.5.0?) and I had some issues going to the next level (2.5.5) so I went ahead and moved to 2.6.0 by doing a new 2.6.0 flash. Now t...

I'm trying to move to an ultra portable tinypilot setup, currently using a pi4b with a USB HDMI capture adapter, and a USB C-to-A adapter cable to connect my modified USB cable for kb/mouse input to the connected computer. It all works great. I snagg...

I have a brand new TinyPilot. I cannot access it via Ethernet. There are no activity lights on the tinypilot or the router when I connect it to my router. I am using a cable that works with other devices. Also, there is a bright blinking red light an...

Can't update to version 2.5.4 from 2.5.0 1.- Did ++++++++ $ sudo apt-get update --allow-releaseinfo-change Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease Hit:2 http://archive.raspberrypi.org/debian buster InRelease Reading package li...

My work laptop is located in my house and I would like to travel out of the state without carrying a work laptop. But my office networking guys always monitor my location by checking my IP address and I cant use Team viewers or RDP or VPN routers to ...

Getting the following error message when trying to do the update The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2. https://logs.tinypilotkvm.com/BWRW5sg0

What would be reasons to upgrade from a working V2 to the V2a? I have the V2 for a few years without any real issues and was wondering whether the new version is significant enough to upgrade to. I didn't see anything that jumped out (other than the ...

Hi. I bought two identical laptops and wanted to use Tiny Pilot to set them up remotely. The first one worked just fine, but the second one never gets past "No signal". The setup uses the same cables (HDMI, USB, no adapters). When I connect HDMI to a...

Hi, I need to remote control one desktop. Problem is that on laptop I have an application protected by one dongle which I want to use, but this application detect if you are trying to connect to my desktop with TeamViewer, Anydesk, RDP...etc and if t...

I upgraded tinypilot from version 2.5.3 to 2.5.4 These are steps what I did: re-flashed sd card with image file inserted card to tinypilot device and power it on After 3 mins, connected tinypilot device to laptop The first time, I could see sold red ...

Hi, Things were working fine for the last 10+ days since I got the device. Today I powered down so I could move around the cabling. When I powered it back up I couldn't connect using the browser. I get a connection refused error. I can connect via SS...

Suppose I shut down my target computer. I wonder if there is a way to turn it on using the TinyPilot web interface? Thank you.

Just sharing some tweaking I've been doing with my TinyPilot stuff, with the hope it might help others. For context, I'm primarily a Windows user and not a Linux/Python/Ansible/Bash person, but I own a couple of Pis to learn on. I can usually read so...

I have tried two different .iso images Ubuntu and AlmaLinux on SuperMicro hardware for testing once the boot to .iso is initiated from server's boot menu and the option selected to Install Ubuntu/AlmaLinux the video goes to NO SIGNAL mode. Here is lo...

I don't see this kind of support mentioned anywhere it this something already supported?

Riding on the existing tips page: https://tinypilotkvm.com/faq/reduce-bandwidth How do you measure your current speed or quality of connection? What are some tips on improving the connection quality? For example: a) I already turned my video to H254....

Hi, Using the TinyPilot but wanted some power control for one of my servers (it doesnt have IPMI unfortunately, its a consumer motherboard) so I thought I would have a dabble and I didnt really want to go all out and start wiring up relays to GPIOs e...

I have been working with the TinyPilot Voyager versions 1 & 2 and have found both work perfectly with MT-VIKI 4-port KVM. Using my physical keyboard or the TinyPilot on-screen keyboard I am able to use the Home-Home-number keys combination to switch ...