TinyPilot

I'm curious.. given the lack of availability of the Raspberry Pi 4.. Does your project have any strict dependencies on the RP4 or could a 3B (got a ton of those laying about) work, or even a LIbreComputer, RockPi, OrangePi, or BannaPi? (all are Arm b...

Subject says it all. Safari on Mac can almost never use H.264, giving this error message: TinyPilot failed to stream video output from your target device using H.264 compression. See "System" > "Logs" for diagnostic details. Refreshing the page or re...

Cannot upgrade pro form 2.5.0 to 2.5.3 First time. The upgrade procedure didn't go more.. the log is as blow I tried once more, then I encountered the difference response "The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' retu...

I'm curious to know if there's any way to keep the screen saver of my connected PC from activating while I'm away? Is there a command line way to interact with the keyboard where I could send a keystroke every X minutes? Or is there a way to send a s...

the video type keeps switching back and forth between h.264 and mjpeg causing the screen to disappear momentarily and then come back. have attached logs and screen recording. assuming its a resolution issue? https://logs.tinypilotkvm.com/8C6kLN3m htt...

Hello, I work for bank fully remote with restricted laptop. They always track IP address. I’m not able to travel with my company laptop. Laptop is using remote desktop system with their own vpn. Am I able to use Tinypilot to connect my laptop during ...

or not

Update: tried with chrome and it is working fine. Maybe it is just not supporting safari browser? I tried to switch to h264 video setting. However it is not successful.

Title says it all - I have a widescreen that can show 3 tinypilot kvms if the borders werent there. Is there any way to have the stream fill the borders of the page instead of having the borders/header/footer? Essentially I'm looking for it to look a...

Just got a new Voyager 2 new out of the box. When attempting to browse I get: 502 Bad Gateway nginx/1.14.2 What do I do here?

It’s making lot of noise soon as i start it.

Hello, My tinypilot has stopped responding. It is not showing connection green light and 'no-sigNal' screen. It seems it does not exist on network. What should I do to bring it online ? Thanks SJ

i have a setup where i have a client from russia connecting to my tinypilot...and then to a client laptop. my question is how do i make sure the client laptop is not seeing a russian ip, but the tinypilot's wireguard/tailscale ip (which should be a n...

for some reason can't ssh into my tinypilot on lan but can acess it via browser...can someone please explain what's going on? tried to intput the lan addrsss directly, and it wont work.

Hi, I recently purchased my second tinypilot (TinyPilot Voyager 2a). My first tinypilot is TinyPilot Voyager 2. How exactly do you install Tailscale on my second TinyPilot Voyager 2a? I tried to follow the installation steps as my first TinyPilot Voy...

I am having trouble connecting to my TinyPilot Voyager 2 over WiFi. It was loading just fine through Chrome until I turned on Windows Defender in Windows 11 after uninstalling another antivirus software. There are no issues connecting when my compute...

Is there some setting for swapping grabbed video to vertical? Right now video is sideway and mouse is horizontal so its kinda tricky but still works

I have already changed the EDID to replace the Toshiba-H2C string. But this "TinyPilot (Intel(R) Display Audio)" continues to show in the Audio section. Where can I change this?

I'm getting issue while updating my tinypilot. I can't access any desktop . Tried to reset but I do have invoice id and transaction id to download the image but don't have order id to download the image . Please help.

Good evening, I just nought my TinyPilot Voyager 2a. I have followed the instructions and connected it to my home routers ethernet port. The device turns on all the lights are solid Green, Red. But I can't access it through web browser. All the menti...

Hi, Im working with a company that host server, and i ask for a server with kvm. They send me a server with tinypilot kvm. Version 2.5.3. What happen next is that we cant use the kvm, appears that the usb disconected. I read in the forum that some gu...

on my tinypilot i set the exit node as my linksys-garage but am unable to see it as the exit node when i go to status...any idea whats going on? only my tinypilot acting weird on the ts network like this

I am using TailScale on my Voyager2, I downloaded the local ca.cert however, I do not know how to download the SSL cert that was generated by tailscale. How to do I download the tailscale SSL cert off the TinyPilot device?

Currently managing TinyPilot with tailscale I was recently on tailscale. Please upgrade to the new s/w release! Please upgrade to the new version. Please add a description of the s/w update to the following page. https://tinypilotkvm.com/blog/tailsca...

Ive recently upgraded my tinypilot to 2.5.3 and the hotkey switching no longer works. I checked the KVM compatibility list at (https://github.com/tiny-pilot/tinypilot/wiki/KVM-compatibility) and am using the MT-VIKI KVM switch. It was working great b...

Hello, I have a work laptop that I work from home with and would like to travel but I am unable to leave the US with it. My work laptop doesn't allow me to download or install programs. To my understanding, both laptops need to be fairly close to one...

I am using 4 units of tinypilot in a Japanese environment. I am very satisfied with the functionality, but it does not seem to support Japanese keyboards, so I sometimes have trouble outputting "_" and other characters easily. Do you have an alternat...

Dear support team, i'm facing in the issue, that after a few minutes mouse and keyboard input are not working. Video is fine. I have bought 4 pieces of tiny pilot and every system have this issue. Maybe a problem of the update? Hopefully there is a f...

Hi, I've purchased a Mt-viki 4 Port HDMI switch for use with TinyPilot, and while I understand that there is no official support I thought I'd see if you could offer any insights into the cause of this particular problem. When I plug the USB-C cable ...

Hi all, Normally, I have 1 HDMI port connecting from Tinypilot to HDMI port of a target computer. No issues. But what if my target computer has a second screen? I tried to use a HDMI Splitter but failed to get it work. I'm still working out the confi...

I upgraded to the TinyPilot OS 2.5.3 to use h.264 video and it works fairly well (quicker and more responsive than MJPEG). I have a question on the h.264 settings, though. For the "quality" slider (which affects Mbps) would lowering this: a) cause hi...

Looking to get a VOIP phone's RJ11 output (usually used for a headset) to transmit over IP as well. Has anyone got this functionality working?

@michael wondering if you've tested the AIMOS KVM w/ powered splitter (as mentioned here: Newbie Problems / Questions #post-4) against the 2a. I have it setup as diagrammed, using the same splitter, and despite everything being powered up fine, I can...

I ordered the 'TinyPilot Voyager 2a' equipment on March 8. But it was canceled after 8 hours and I got a refund for the payment. Not sure what the issue is. I need help to place an order again and get the equipment asap by this week. It's really impo...

Hi, I've ordered a Voyager 2a PoE and given that it's powered via the ethernet port, would it be possible to configure the USB-C port labelled "Power" as an additional USB device? I'm specifically interested in the idea of using a KVM with separate K...

Hello, I was accessing Voyager 2 tiny pilot remotely and was having an extreme lag issue, despite a solid internet connection at both locations. I restarted my tiny pilot and was no longer able to connect. Now that I am back on site I am trying to co...

I have been using tinypilot for 3 months and it was working perfectly good. But I got a new router and not i am not able to connect to the tinypilot anymore do i need to reset something? Also if i connect my old router back it starts working again.

Didn’t use my TinyPilot for several months. Trying to reset my password, I discovered that license expired 2 days ago. And I have to pay $79/- to renew or $400/- Tinypilot will go useless. Can you please give me link to download my original image (th...