TinyPilot

I'm trying to install Tinypilot on my new Pi4 running the latest version of Pi OS Lite using SSH with the simple installation command found on GitHub, but keep getting a "builduStreamer fail" error time and time again. TASK [ansible-role-ustreamer : ...

Hi, It seems like I setup wireless SSiD on my home wifi and it’s stuck to it but when I change it to hotspot it stays connected and only works to home wifi or is this a Tailscale issue?

My Tinypilot install seems to be running nginx 1.14, which if I'm not wrong is deprecated. Is it possible/easy to update it?

Does the Tiny Pilot pass the network through to the machine it is connected to or would we need to have a second network drop or small switch to keep Tiny Pilot and the computer it is controlling connected to the network?

Anything magic about cables for from USB-C Data port (V2) to USB-C (target device) versus C to A? I tried with a few cables and it didn't work - I had to use a laptop-USB hub (C-->A*4 on the target device) and the A-C cable that came with the Voyager...

How can i use tinypilot to show another external monitor besides the laptop monitor ?

After reboot of the tinypilot device (purchased with pre-programmed sd card) due to power loss nginx reports error 502. tinypilot service is active but reports import failure: root@tinypilot:/home/pilot# systemctl status tinypilot ● tinypilot.service...

I have an 8 port KVM with Hotkey switching. It allows me to press some keys on my keyboard to switch to another port on the KVM. This is very handy. However, the Mouse on the TinyPilot Voyager 2 will not work through the USB port on the KVM that allo...

The Linux Magic System Request Key Hacks (https://www.kernel.org/doc/html/latest/admin-guide/sysrq.html) is just a fantastic way to interact with Linux when it's being "naughty". PiKvm has it implemented in their "Shortcuts" menu, and I have used it ...

HI, Already i connect one Tiny Pilot with one target machine1. I try to connect new Tiny Pilot for new target machine 2. But in my 2nd computer showing only 1st target,not showing 2 nd target also giving error 404

Sorry for the noob question. I'm considering getting the Tinypilot Voyager 2. What I'm trying to do is be able to access a friends PC via KVM from a different country, so over the internet. Obviously if the whole thing only works within a LAN that's ...

Here is the error message: 'The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2.'

We have purchased a TinyPilot Voyager 2 with the intention of connecting/controlling Dell Latitude laptops at a remote site. We have tested the setup we were planning locally, and we have found that when the laptop reboots, the TinyPilot web portal d...

Mouse position is correct at the top-left corner of the virtual desktop. As I move the mouse to the bottom-right, the cursor on the host machine moves half the distance. By the time I have reached the bottom-right corner, the host cursor is thusly in...

First off love the software veryyyy convenient!! Previous web-gui updates have worked without issue, until now. The logs show "ERROR Update process timed out" --- After multiple reboots, I am at a loss. Is there a bash script to run the update throug...

I saw that chrome app enable cmd-t and cmd-w to work properly according to this: https://tinypilotkvm.com/faq/browser-hotkeys. When I open a browser on the target device and press cmd-t, it correctly opens a new tab in the target device. However, a c...

Can this be done? my thinking is I would need 3 things The TinyPilot an HDMI Splitter so I could see my screen while I'm in the office and the TinyPilot has the HDM as well to access while I'm away Possibly an LTE router for internet access to the Ti...

Using the VGA to HDMI adapter, I'm getting terrible picture on a Dell PowerEdge R240 server (we have 4 of these servers and they all do the same thing). The screenshot below is of the Ubuntu Server install screen using the ISO image uploaded to the T...

Hi, I need hardware setup for office laptop with my personal laptop.

Hi, In my home network, how to connect 2 target machines? need a 2 tiny piolet? then,how can i identify target 1 to one laptop and target 2 in another laptop? I have only one internet connection in my home.

I connected TinyPilot to Windows and Mac, and I see Toshiba-H2C audio device on both laptops. Is it a way to disable the audio device so it is not recognized by laptops since TinyPilot doesn't support audio anyways. Or rename the audio device from To...

I just received my TinyPilot today, and it works great! I am connecting to a MacBook Pro 13” M1, and everything works as expected. I had just one question. Is it possible to include sound over the HDMI link? Certainly sound can be transmitted via HDM...

Issued a reboot to the system and after reboot, trying to connect to the web service results in a 502 bad gateway. ===================================================== Checking logs, see the following being repeated over and over. Oct 17 08:31:23 02...

Hi, I'm looking at the Voyager 2 and I want to know if it will work on a phone (Samsung model) and using tailscale to remote into it from another location? I'm not familiar with tech stuffs, but I tried to use RDP to remote into the phone and was blo...

Hello, We are using 3 of these units to allow access to operators from various setup benches around the shop and would be great if we could default to fullscreen at connect time? also would a good way to make them view only be to just remove the USB ...

Hi, trying to update from 2.4.1 to 2.5.0 I'm getting The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 1. Here's my log: https://logs.tinypilotkvm.com/quQa13J2 Thanks.

Hi There I have followed your guide regarding change my unit from the default DHCP til static IP: https://tinypilotkvm.com/faq/static-ip But i keen getting an error every time. Here i my first try: pilot@tinypilot:~ $ export TINYPILOT_STATIC_IP="10.1...

after some time of not using the computer connected to tinypilot, it seems it went to sleep. normally its possible to wake the computer by pressing a key on the keyboard or on the mouse, however with tinypilot this seems not possible? please advice o...

If I have a laptop in US on my VPN and another laptop in Europe on the same VPN , are they both considered to be on the local network and I can just access the US laptop in Europe using the tinypilot url? Or do I need to still use cloud solutions, re...

I am having an issue with no video with a brand new TinyPilot Voyager 2. Tried with both HDMI direct and HDMI to VGA adapter. (Tried this on 2 different laptops, same cables work fine with mutliple test monitors. Logs below: uStreamer logs Oct 06 22:...

Hello, I am attempting to use tinypilot through an azure virtual desktop (AVD) connection, but the keyboard is not passing through to the tinypilot browser page. In my AVD setup the virtual machine that is serving the bowser that I am using, is conne...

I tried to upgrade through the web GUI and can no longer access the tiny pilot from my browser. I am able to ssh in and rebooted the system from there, but it still doesn't work. The last message in the browser from the upgrade attempt was "Failed to...

Team, I have a tiny pilot that is a KVM for a locked down laptop. When i web into it, it works perfect from my macbook pro M1 Firefox, but does not work consistently from my windows 10 Intel NUC Firefox/Chrome/Edge. Nothing changed and this used to w...

Dear Tinypilot, Thank you for a wonderful product. My problem involves using the TinyPilot and two identical IOGEAR 4-port KVMs, at the same time. Short version: I am having difficulty sending the sequence "CTRL","CTRL","2","ENTER" via TinyPilot on-s...

Can I use Multi TinyPilot to control Multi Laptop on the same lan ?

How many Device/ Workstations Connected or login with Voyager 2

i have one KVM i need to access KVM from a different country

Is it possible to tell from the logs if the remote PC is off, not working, or if the cables are not plugged in? Scenario: We have a server that we are trying to upgrade the RAM in and using remote handles that aren't technical and we only have them f...

Coming from 2.4.1 Recent fresh install. Pro version. Voyager 2 The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2.

Hello, I have searched around the forums but haven't encountered this issue. I bought the items from the do-it-yourself page (including the USB data/power splitter) as I already had a Pi model 4 b lying around. Once I had all the items I formatted th...