TinyPilot

Hi I have used the quick install script. I see a 502 Bad Gateway error and the log shows the following: Connection refused) while connecting to upstream, client: 192.168.100.103, server: tinypilot, request: "GET / HTTP/1.1", upstream: "http://127.0.0...

Can you create a custom build that renames the recognized device name from "tinypilot usb" to "keyboard usb"?

Hi. Apologies is this has already been asked. I searched and didn't see anything. I just ordered your kit a few hours ago and am reading. I know that you can't interact directly with powering the machine on and off, but have you thought about making ...

When I visit your docs in one particular Chrome instance, all of the images are hopelessly blurry and unusable, and there is an uncaught Promise rejection in the JS console. This doesn't happen in incognito or on my phone. There must be some browser ...

Hello, I installed TinyPilot on my RPi B (1st generation with 256Mb RAM), I only have these devices. The video stream does work properly, however I can't get USB input to the client PC to control it, that doesn't work. I'm using one of these USB-Y sp...

TinyPilot logs May 05 13:26:02 raspberrypi python[530]: self._target(*self._args, **self._kwargs) May 05 13:26:02 raspberrypi python[530]: File "/opt/tinypilot/app/hid/write.py", line 18, in _write_to_hid_interface_immediately May 05 13:26:02 raspber...

Can i use female to dual male splitter cables? I used kapton tape to disconnect power from one cable.

Hello - I received my Hobbiest Kit today. It's very nice, but being in the UK the power block is somewhat useless. I was wondering if anyone could point me at a power supply suitable for the UK? Also in the instructions, it describes clicking the but...

I set up the raspi wifi config to my main network but when I try to set up a different network configuration it doesn't take, and after the reboot it goes right back to the first configuration.

Hi, I recently got my TinyPilot. I have set it up ,but I notice there is a difference in the brightness of the Target host in other monitor. Are there any configurations that can be applied so the brightness is retained ? Thanks

I am considering a tiny pilot to do support at a remote location, but not all of the systems there have HDMI or DVI - many are still stuck at SVGA. Has anyone had verified luck with an svga -> hdmi adapter on the capture port?

Hey guys I think I am on my wired lan as well as my wireless lan. I see in my router two IP address for "tinypilot". Is there a way to disable the wifi? I am having some connection issues via VPN right now within my network. I can't seem to get video...

I am trying to access the tiny pilot url through a mobile phone and it dose not work, this is also the case for any non desktop browser.

Hello, Hello When I access my system from my local network I am not having any issues with the video however once I access it over the internet there is a 25 second video lags however if I refresh the webpage it there is no lag. there is no lag with ...

Currently there is no audio pass through.. Are you planning to have it anytime soon ? Thanks

I just got the tiny pilot and followed the instructions. When I go to https://tinypilot/ I get a server not found error

How can I install any of these apps onto the device. Provider Setup Complexity Performance remote.it Easy Medium Tailscale Moderate High ZeroTier Advanced High

I have just received the device I am unable to access the same. Below is my screenshot

Hi Michael I'm trying to use the TinyPilot over the internet on a rather limited 4G/5G connection. I realize that this will in it self cause latency issues because of the slow connection. My setup is: A TinyPilot with VPN and local WiFi client. The T...

Hello, I'm starting to set up my 2nd Tiny Pilot Voyager. The first one went fine, but on the 2nd one, I'm getting this error, when trying to log into the web server: Invalid username and password on 1st web server login I logged in first through SSH,...

I stumbled upon the TinyPilot build while scouring the internet for potential laptop/kvm solutions for my remote support scenarios. Previously I have used a Lantronix Spider for similar applications with desktops and servers. My biggest challenge is ...

Hello Michael. In FAQ I can see 3 option to use TinyPilot over the internet. My problem is that it is not quite clear how to setup each of this options. Is it any chance you can create step by step guide what should be done in order to make it works?...

I just received the TinyPilot today and have tried to connect it without much luck. It never seems to obtain an IPV4 address and my router never grants the device a DHCP lease. I can connect using SSH over IPV6, but the webinterface never comes up. B...

When I reboot my server tinypilot goes to a black screen and I have to reboot tinypilot to get video back. Any way to fix this?

When I hold shift and left click on the mouse, or hold control and left click on the mouse (to select multiple items) on a remote PC, it no longer works for me, anyone else? I noticed it broke update before this last one, but thought I would wait for...

I ran the update to the latest version as of a few minutes ago but still get nothing at all either via the soft keyboard or from my hardware keys forwarding. Likewise no cursor movement. Any common gotchas for me to check? Since it doesn't appear to ...

So with the set up I have, is a POE Hat, and a USB 3 cable with the V+ blocked and plugged into the PC from the USB Power slot of the Pi (4 Mdl B). This setup was working for me before I updated to the latest version and then I no longer have the abi...

Can TinyPilot be installed on a Raspberry Pi that contains minimal pre-existing software on the device? Currently I'm running a RPi 4 2GB with PiHole and a few minimal scripts. Can I install the TinyPilot alongside this software, or does TinyPilot ne...

I undertand the Voyager is finished - plug and go kind of solution. But with the Hobbyist kit you need too be comfortable to build and configure things. Beside that big difference - are there usable feature differences?

When I am using the old TinyPilot I had, enter on the num pad worked fine, but now when I push the enter on the num pad it looks like below. This is where I pushed the normal enter key, then the num pad enter key 4 times then the normal enter key. Fo...

Wanted to share a discussion I had with Michael so that others with a similar environment can benefit. In my environment at home, I'm running Home Assistant (https://www.home-assistant.io/). Home Assistant is basically my portal to controlling everyt...

The escape key takes me out of full screen. Is it possible to remap this to another set of keystrokes?

Hello all. I just received my pilot today, and it was a very painless setup. However, I'm unable to insert a period. This is in firefox (chrome won't allow me to bypass the SSL error). If I hit the period key on my keyboard or on the soft keyboard, i...

I installed Raspbian OS, used USB HDMI capture device and was experiencing over 10 seconds of latency on the video feed. I reached out to you via e-mail and you suggested maybe trying the CSI bridge. Ordered and installed today. I was thinking that w...

I came across your Tinypilot KVM while looking for a remote control solution for videogame consoles (PS4, Xbox, Switch, etc). I've tried several KVMs and while they're all capable of streaming the video, most fall short when trying to control the con...