TinyPilot

I tried to update my TinyPilot Pro using... /opt/tinypilot/scripts/upgrade && sudo reboot and I received the following error (additional lines provided for context)... TASK [tinypilot.tinypilot-pro : copy admin scripts] *****************************...

I am trying to ssh into the TinyPilot but the password is failing. Is this still the password? flyingsopi

Just got the TinyPilot Voyager, and on first boot, there's no web interface. I can SSH in, but nothing is listening on any external IP, except the SSH daemon. I can see that cycle-tls-keys.service failed: ● cycle-tls-keys.service - Cycle TLS keys Loa...

Hello, I work from home and have a company laptop that I feel umconfortable with bringing with me around. While searching for solutions, I think that TinyPilot with the pro software and remote.it might be exactly what I'm looking for. I have a pair o...

Looking into router is one way (But unfortunately, my landlord has the router credentials to look into the router) Is there anyway I can identify the IP that I would be hitting in the browser of my target laptop to access host laptop(the laptop conne...

I will be using the tinypilot to remotely connect to an inspection machine which uses a joystick as input (via a DB9 connector). Is there any way to send joystick input from the remote PC (the one working through a web browser) to the host PC (the on...

We just received a TinyPilot Voyager last week and had been using nearly daily, but now after the weekend the device won't get an IP and plugging it into a monitor shows nothing. We have tried a different SD card with Raspbian and it worked fine. Is ...

Can you have a a drop down added to the Menu for Sending CRL+ALT+DEL key instead of scrolling down every time to go and do the key press on the Virtual keyboard so it is easier. Thanks Ven

Is there a way to get access to dual monitors

The TinyPilot is conectet to the main VGA port on a DELL PowerEdge 2970 Windows Server. when you BOOT the server on TEXT Mode thee is not video Signal, so I can do any SetUp ot Boot configuration, THE Mouse and Keyword Works but not video, ONLY When ...

Hello, I just started TinyPilot for the first time, I'm encountering a couple of issues. Here is my setup: KVM => Powered HDMI Splitter => TinyPilot / Monitor USB Keyboard web interface works through the KVM, but I can't get any video signal on the w...

Just got the TinyPilot Voyager. I have it connected to a MBP via a USB-C to HDMI cable. I have the data connection to the MBP via the microUSB to USB-A cable that came with the Voyager via a USB-A to USB-C adapter. I can access the web app but I’m no...

What adapters can be used to interface this unit to a KVM that uses PS2 & VGA , I believe there is a VGA>HDMI solution , which one is know to work well & what USB>PS2 Keyboard and mouse emulator are available and work well with this unit ? many thank...

I have been using TinyPilot Voyager for remotely controlling my laptop, great product ! Holding down the CTRL key does not work as it is supposed to anymore after the latest update. CTRL itself works, but holding it down for GUI operations, like mult...

Hi, I just assembled my kit and the device is up and working great. Very cool. The only issue I have is that even after importing the cert into my store/keychain, chrome still doesn't like the certificate. I can't click through in chrome and in safar...

Received 4 new TinyPilots and want to install all 4 on the same network. Looking for some guidance and/or directions to make each unit unique. I think the hostname needs to be unique but not sure how to accomplish that task or if that is the correct ...

I've set up my tinypilot and can connect to it via a web browser. The mouse and keyboard are communicating with the host machine, but the screen is only showing black. I've reseated all the connections several times as well as rebooted. I'm using a k...

Hi I have used the quick install script. I see a 502 Bad Gateway error and the log shows the following: Connection refused) while connecting to upstream, client: 192.168.100.103, server: tinypilot, request: "GET / HTTP/1.1", upstream: "http://127.0.0...

Can you create a custom build that renames the recognized device name from "tinypilot usb" to "keyboard usb"?

Hi. Apologies is this has already been asked. I searched and didn't see anything. I just ordered your kit a few hours ago and am reading. I know that you can't interact directly with powering the machine on and off, but have you thought about making ...

When I visit your docs in one particular Chrome instance, all of the images are hopelessly blurry and unusable, and there is an uncaught Promise rejection in the JS console. This doesn't happen in incognito or on my phone. There must be some browser ...

Hello, I installed TinyPilot on my RPi B (1st generation with 256Mb RAM), I only have these devices. The video stream does work properly, however I can't get USB input to the client PC to control it, that doesn't work. I'm using one of these USB-Y sp...

TinyPilot logs May 05 13:26:02 raspberrypi python[530]: self._target(*self._args, **self._kwargs) May 05 13:26:02 raspberrypi python[530]: File "/opt/tinypilot/app/hid/write.py", line 18, in _write_to_hid_interface_immediately May 05 13:26:02 raspber...

Can i use female to dual male splitter cables? I used kapton tape to disconnect power from one cable.

Hello - I received my Hobbiest Kit today. It's very nice, but being in the UK the power block is somewhat useless. I was wondering if anyone could point me at a power supply suitable for the UK? Also in the instructions, it describes clicking the but...

I set up the raspi wifi config to my main network but when I try to set up a different network configuration it doesn't take, and after the reboot it goes right back to the first configuration.

Hi - Brilliant device! Unfortunately, I can't seem to get KB/mouse activity. I have the "Hobbyist" kit. I'm using this to connect to a security-camera NVR system (a ReoLink RLN16-410. The video capture is perfect, but no KB/Mouse - any ideas / sugges...

Hi, I recently got my TinyPilot. I have set it up ,but I notice there is a difference in the brightness of the Target host in other monitor. Are there any configurations that can be applied so the brightness is retained ? Thanks

I am considering a tiny pilot to do support at a remote location, but not all of the systems there have HDMI or DVI - many are still stuck at SVGA. Has anyone had verified luck with an svga -> hdmi adapter on the capture port?

Hey guys I think I am on my wired lan as well as my wireless lan. I see in my router two IP address for "tinypilot". Is there a way to disable the wifi? I am having some connection issues via VPN right now within my network. I can't seem to get video...

I am trying to access the tiny pilot url through a mobile phone and it dose not work, this is also the case for any non desktop browser.

Hello, Hello When I access my system from my local network I am not having any issues with the video however once I access it over the internet there is a 25 second video lags however if I refresh the webpage it there is no lag. there is no lag with ...

Currently there is no audio pass through.. Are you planning to have it anytime soon ? Thanks

I just got the tiny pilot and followed the instructions. When I go to https://tinypilot/ I get a server not found error

How can I install any of these apps onto the device. Provider Setup Complexity Performance remote.it Easy Medium Tailscale Moderate High ZeroTier Advanced High

I have just received the device I am unable to access the same. Below is my screenshot

Hi Michael I'm trying to use the TinyPilot over the internet on a rather limited 4G/5G connection. I realize that this will in it self cause latency issues because of the slow connection. My setup is: A TinyPilot with VPN and local WiFi client. The T...

Hello, I'm starting to set up my 2nd Tiny Pilot Voyager. The first one went fine, but on the 2nd one, I'm getting this error, when trying to log into the web server: Invalid username and password on 1st web server login I logged in first through SSH,...

I stumbled upon the TinyPilot build while scouring the internet for potential laptop/kvm solutions for my remote support scenarios. Previously I have used a Lantronix Spider for similar applications with desktops and servers. My biggest challenge is ...

Hello Michael. In FAQ I can see 3 option to use TinyPilot over the internet. My problem is that it is not quite clear how to setup each of this options. Is it any chance you can create step by step guide what should be done in order to make it works?...