TinyPilot

67 YEAR OLD "NEW GUY"..using all new components on a raspberry pi 4. tried two computers..swapped all compnents except for the short segment from the USBTO THE HDMI CABLE. NEW USB TO HDMI coming tomorrow, I have the dump file and don't know where to ...

Can i replace my current TinyPilot with TinyPilot Voyager 2a so i can have Audio streaming?

I just recieved my new TinyPilot yesterday. I (of course) checked to see if there were any updates needed and it says there is an update to the latest version, but in order to take full advantage of the new features I would need to do a factory reset...

Hi, I have been using my TinyPilot for last 6 month, and then last week without any changes I could not connect to it. device gets IP address from DHCP server and I can ping it but on Web GUI and SSH connection it give me refused connection error. an...

Hi. I am now testing 2 TinyPilots connected to 2 machines. On one machine, the mouse positioning is absolute. On the second, the mouse positioning is relative -- I've been using both for a few days and so I know it's not lag and probably not user err...

Hello. I currently have the TinyPilot Voyager 2 and would love to be able to stream audio using the latest 2.5.3 update. Is there any upgrade path to do so without having to buy a whole new unit, even unofficial? I'd much rather buy a $100 part than ...

Hi All. After troubleshooting using TinyPilot over an internet connection, I was only getting an MJPEG feed, and it was impossible to get H.264 video unless i was connected to my office's on-site LAN or connected via company VPN. I discovered that th...

I'm having a weird issue with the BIOS on an HP Z640 Workstation. Everytime I try to change a setting on the bios, the tinypilot screen freezes and/or the keyboard stop working. I can't even issue a crtl+alt+del to reboot, I have to power the PC off ...

Hi I am not getting screen image on my client laptop. It seems all keyboard commands are being responded to ok by the server laptop but I am not seeing the screen on my client laptop. I have changed it with a working tinypilot and everything seems to...

I am facing latency issues, and would love to get the latest update to version 2.5.0. But when I try to update it, I get a failed to update error. These are my logs: https://logs.tinypilotkvm.com/jw0lAewM

Is there anyway to get/see/obtain an inline demo ?

Just found the TinyPilot. Looks like just what I am searching for. I do have one concern, the long term stability of using an SD card for the OS. I say this because about 8 years ago I put a Pi (running Raspian) in use to do some snmp samples. It ran...

Hi, I recently changed the hostname. After reboot, the web page will no longer come up presumably due to a certificate issue. I have http disabled. How can I enable http via the cli? I really don’t need https anymore because I now use an ssh tunnel t...

We purchased a Voyager and it's at a remote site. After a failed update we were met with this when attempting to log into it: "502 Bad Gateway". I've had someone manually power cycle the device and still seeing the same error. I can see it on the net...

I’m using tail scale to view my Remote Desktop using my phone. I can see the pointer but I’m wondering if there is a keyboard stroke that i could use to double click since i can’t double click using my phone screen

What's the difference between TinyPilot Voyager 2a and TinyPilot Voyager 2? I tried Googling and looking for any blog post announcement as well as reviewed the product page, but didn't see any comparisons or announced changes in 2a relative to 2. Thanks

Hi, I have just received the "tiny pilot" together with the VGA to HDMI adaptor. I keep getting "NO SIGNAL" on a black background when connecting. Keyboard and mouse works fine. I experience the same with 3 different VGA outputs/sources. I have succe...

Current machine = Macbook Pro Target machine = the machine I want to remotely control, a desktop PC. I have set-up TinyPilot with my target machine and can access it via IP address in a web browser using TailScale. Here's what I see: https://ibb.co/0...

I can't update the tinypilot The update failed: Command '['sudo', '/opt/tinypilot-privileged/scripts/update']' returned non-zero exit status 2. https://logs.tinypilotkvm.com/6RBTyVpF Please advise, Alexander

When booting into the bios on an MSI X570-A PRO, the interface essentially becomes completely unusable. I managed to get it into the advanced -> config mode using the keyboard, but then even that became unresponsive quickly. This is the first time us...

Hi, I have not been able to get the TinyPilot Voyager 2 PoE up and working. For $474.81, I hoped for a seamless solution. Forum-based support has not been responsive enough and unfortunately, I don't have much time to wrestle with this since I need t...

Hello, I installed the tinypilot and so far it's been great. I use it to remote control a work laptop at the office from home. I was wondering if there is a way to stream the audio/microphone so that I would be able to also take calls from the work l...

Hi, my SSH access was disabled and unable to enable back. may i know how to enable it? thanks!

When my TinyPilot is connected directly to a PC it works fine, but if I try to connect it via an AIMOS KVM as described in the KVM compatibility list (i.e. combined with HDMI splitter) the keyboard works but the mouse does not, the pointer jiggles ra...

Hello there :) I see that experimental support was added for H264 streaming, but I don't see any way to enable it in the GUI. I'm guessing it's done over SSH and if so, how? Thanks!

First I love being able to work on my 2nd machine within a window on my primary desktop. Thank you. [edit: I am running in Chrome's "create shortcut" app mode, if that matters.] But when I use Alt-Tab (yes, I am an long-time keyboard user) to switch ...

I just purchased a TinyPilot Voyager 2 in hopes of using it with our Raritan Dominion KXII.. I had no issue setting the unit up. I did purchase the VGA to HDMI adapter and plugged that into the Raritan KVM. I can see the main menu and the keyboard an...

Using Tinypilot voyager with Tailscale on ethernet cable over IP. Was working before that, but was having internet issues. Any ideas what happened or how to fix? Getting before the login page should be popuping. instead get this: {"code":null,"messag...

Hello Guys, We've bought TiniPilot2 for about 6 months ago, but we never were satisfied. The keyboard simply crashes in BIOS, in different Linux systems like Centos 7, Almalinux 8 and others. Also a lot of video glitches. I don't understand why so, b...

i dont have wifi enabled yet, but im curious, as opposed to connecting to the tinypilot's wifi ssd (presumably)is there a way to feed an ethernet cable from a router with internet, or a computer, into tinypilot, and have my tinypilot , which has tail...

I need to connect 3 computers and use them remotely. Do I need to get 3 Voyager 2 units, or can I use one unit to control each of the three computers from my tablet?

I'm a student writing custom software to automate a host machine (also referred to as the "target") through the TinyPilot Voyager 2 using the exposed APIs defined in api.py (for RESTful calls) and socket_api.py (for WebSocket connections). For the cu...

When I tried to update tinypilot today, I discovered that it had run out of space. Investigation showed that /var/log/syslog and /var/log/kern.log were about 7 gigs each. The reason probably is that I only run tinypilot on a need basis, i.e. I don't ...

I installed our first Tinypilot today and added our custom SSL certs. When trying to connect to NGINX we realized there was a public-key signature algorithm mismatch so the client/server couldn't agree on a cipher and the SSL handshake failed. It was...

i try to turn on ssh on the security page in tinypilot, it shows disconnected after a few seconds (red button on bottom left), but I get this error in a pop up. Refreshing shows ssh still disabled. how to fix this? Also any commands, once I do ssh, t...

The update from 2.5.0 to 2.5.2 fails. The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 100. The issue appears to be here: dpkg: unrecoverable fatal error, aborting: reading statoverride file '/v...

No mouse or keyboard input. Confirmed using USB-C (Data) from TinyPilot to USB-A on device. Updated to latest version 2.5.2 Logs - https://logs.tinypilotkvm.com/kHBQq5rL lsusb Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Dev...

Use the web based upgrade and watched all the messages. When completed got a message something like "Can not connect. Please power off and on and try again" I power cycled and still no web access or response to ping. Please advise how to proceed. Tha...

Hello, I was able to get my tinypilot Voyager 2 v2 set up, and calibrated the remote access using the tailscale client. Great functionality and when accessing from my PC I have no complaints! I have not tested off site, but I was able to connect from...