TinyPilot

Hi - I powered off my server and disconnected it from my TinyPilot. I didn't change anything HW or SW related in the server, but when I reconnected the TinyPilot, it no longer shows the video feed, it just shows the "broken image" icon. I've restarte...

Hi, This feature is important to keep the computer awake if it goes into sleep after sometime of inactivity. This feature can be enabled / disabled at anytime.

Does Vovager 2 able to mount multiple virtual media at the same time? I need to mount the ISO file to boot and second virtual media for driver installation. Can this be done? At the moment, I can only mount one virtual media at a time.

I have special windows computer control 1 keyboard and 1 mouse and dedicated USB port (for industrial Joystick). So my computer has 3 usb port for keyboard mouse and joystick. TinyPilot can control keyboard and mouse but I wanna also control remotely...

For anyone having issues connecting tinypilot to tailscale or want to know how to do so, TL;DR: follow install docks, but when ssh-ed in, run this command to spool up the tailscale app in the TinyPilot:** sudo tailscale up --accept-dns=false --accept...

I've connected the TinyPilot usb C data to the Macbook usb C. And, I've done the same for the HDMI via a macbook dongle. Within TInyPilot, I am able to view the Target Macbook pro, but no keyboard or mouse data seems to make it to the target machine ...

Hi. I am thinking of buying two. I am have a FT job that will be going back into the office in a month or so and I have a contract gig. I have corp laptops issued for both. I do not have admin access to either machine. I was hoping to configure one f...

Hi, i bought a voyager2. i see that there's NO SIGNAL error on all the machines i connected. I could see that mouse and keyboard are working fine - i confirmed this by connecting the dispay output to another monitor and i could control it's mouse and...

Hi, my company allows me to work from home, but I must keep my company's laptop in a designated area (i.e. my home). I cannot work from a coffee shop or a even a library in the next town. I think this product will allow me to leave my work laptop at ...

Hi @michael As discussed with you, starting a separate thread. here it is the logs link -> https://logs.tinypilotkvm.com/TejfFamD Also, there was no change made. Infact i did ssh today prior to that it was working perfectly fine on 18th Feb. That was...

I have just received the TinyPilot Pro and connected it to my SuperMicro server. However, video doesn't seem to work - it always shows NO SIGNAL. Connecting the TinyPilot Pro to my computer works. Connecting a monitor to the SuperMicro works.

Summary: Tinypilot does not display any output until the Linux kernel loading screen shows up (not even GRUB). The output + peripherals work fine after that. There have been several posts reporting the same problem but the common comment has been tha...

Has anyone tried to use this control an iPad? iPad supports usb mouse, even if it can’t stream the video I would like to know if this works.

Hi, I would like to port tinyPilot for another platform expect raspberry pi , for that I have some query related to tinyPilot. Can anyone help me to resolve the query if possible. It will be heplfull. Is it possible to port tinypilot for another arch...

Running 2.3.2 and yet we still can't video to show using two separate HDMI direct cables. This is Asus z690M-PLUS D4 board with 12900K cpu. OS is Linux Ubuntu 22.04. Btw, the machine is running in CLI mode, no x11/xorg running. So just simple shell/s...

Concerning the VGA-HDMI adapter (FOINNEX), has anyone else noticed the shifted image while using it? I experience the same issue with the adapter connected to either a TinyPilot or a TV. This seems to be a common issue with that adapter. Here is a sc...

Hi I have a corrupt SD card and want to replace with a new SD card and replace my Tinypilot pro. Where can we download the Pro image file from ?

I have no signal showing up. I tried a few different HDMI cables. I've tried a few computers with limited results on each. Cable and video work for an external monitor. Currently tried to setup a pfSense box with a Protectli device. I set it up befor...

I have created a video to make things more clear. I get no video detection via HDMI using Voyager. Works fine on next computer. 2nd monitor not seen in device manager (Windows). Computer displays fine to 'real' monitor though. Any ideas? View on YouTube

I'm start the update TinyPilot with: /opt/tinypilot/scripts/upgrade && sudo reboot And get error: ERROR: Could not find a version that satisfies the requirement pkg-resources==0.0.0 (from versions: none) ERROR: No matching distribution found for pkg...

Is it possible to go into full screen mode across two monitors? I'm not looking to capture dual monitors on the TinyPilot, but instead a single monitor across dual monitors from the control machine. I'm able to drag chrome across multiple screens, bu...

Bought 2 TinyPilot Voyager 1 devices Both on current version 2.3.2 with recent full re-image fresh OS After running without HDMI signal input, device falls asleep and doesn't wake again. Required hard power reboot. Does RasberryPi O/S have a sleep se...

Hello, I have a device which does not support HDMI or VGA output. I thought I could replace the HDMI Adapter Board with the Raspberry Pi camera - however it does not seem to be plug-and-play - I still get "no signal" in the web ui. Is there any trick...

@michael As mentioned in the previous thread, I switched over to firefox and now I can get in through the IP address, but the screen is all black except the bottom status bar...

My tinyPilot's red light is on. It is connected to a computer (Ubuntu Linux 20.04) via USB. I have plugged in an ethernet cable directly from ISP router to Tinypilot. I see the Ethernet powers green and orange lights when ethernet is plugged in. http...

Hi, I just purchased this TinyPilot Pro a few weeks ago. It has been working fine until today when I start getting the broken image icon. Keyboard and mouse (within that tiny image icon) still kinda works. I noticed there's a thread having the exact ...

Any chance we might see 3840x1080 resolution support in the future?

Would love to see future integration with Splashtop Streamer. This would allow secure access to your device from anywhere, and access to the controlled computer - even if through a web browser on the device pointing to itself.

When using a slave / controlled PC directly (physically) and when TinyPilot stays plugged into that same PC, ever since the latest update, the mouse will jump back to then dead center of the screen every 10 to 20 minutes. This is SUPER frustrating. I...

Would love to see multi-monitor support enabled using two side by side TinyPilots with synchronous mouse and keyboard support.

TDLR: title question. If not possible I would like to formally request this :-) Why needed: I use a product similar to Synergy where I have 2 PCs & 2 monitors but 1 mouse and keyboard. ( The 2nd PC I keep TinyPilots browser window up, thus controllin...

If the power cable is not long enough, can it be extended using a USB-C extension cable?

Hello, I have bought TinyPilot Power Connector last May, it stopped working. I've been using it with good quality micro usb cables and a 3A charger. It was OK for the first few months, then it started pikvm started showing "yellow voltage sign" but i...

Hi, Today I received the package of TinyPilot 2 and i also tried to connect this with motherboard BTC-S37, screen is showing correctly but mouse and keyboard isn't working, i have also double checked the installation and everything looks fine but the...

I connected to my iPhone via TinyPilot. I displayed the screen with a video capture, but I can't operate it with the mouse. The mouse seems to move a little, but for example, it seems that the accelerator and the brake are applied at the same time. I...

I read on reddit and on this page (https://github.com/tiny-pilot/tinypilot/wiki/KVM-compatibility) that the AIMOS 4 port HDMI KVM would work with the TinyPilot. I purchased the one from Amazon using the wiki link (https://www.amazon.com/dp/B0817YFJKW...

Hello, I am trying to use TinyPilot via remote.it, but the latency is neraly 10-20 seconds with low image quality and low FPS. What can be a solution?

Hey all, We have 8 tiny pilots in use across our multiple locations, all the locations are connected via an internal network. The issue I am having is I am having is I can only connect to one of the 8 via the hostname. I have changed each one from th...

I'm installing TinyPilot on a new RPi 4 running the latest updated version of Raspian OS Lite. The installation script is falling over on the command: /usr/bin/git clone --origin origin https://github.com/tiny-pilot/tinypilot.git /opt/tinypilot givin...

Does the Voyager 2 support POE? I thought it did when I ordered it earlier this month but now I realize it may not… yet?