TinyPilot

i have a MacBook Pro that connects to an external monitor via hdmi that has hdmi input and output. To the monitor’s output, I want to connect tiny pilot pro and take the advantage of hdmi pass through for passing video from Mac to monitor to tiny pil...

Hi Team, I configured the TinyPilot a week ago, and it worked smoothly without any lag on the first day. However, since last Thursday, it has been experiencing significant lag when accessed both from the local IP address and from other IPs. I’ve had ...

Hi, Are there any further instructions made for laypeople on how to install Tailscale? I have successfully done this on another raspberry pi based kvm but the instructions provided contain quite a few assumptions and steps aren’t fully laid out. Does...

I've just successfully installed the latest version of the TinyPilot software v2.65 and am running the latest version of MacOS Sequoia using Safari v18.1. I can not see the display at all but if I take a screenshot, it seems to show up. The display s...

I want to connect my Tinypilot via internet from another location remotely. Can you send me the instructions?

I have Two tinypilot TP-1 & Tp2 that I bought via amazon In order to factory reset I am not able to download the file using my 'amazon order number' it keeps giving my invalid error message I do have the file when I reset by TP-1 Question1) do I need...

I keep getting the same error every time I try to upgrade my TinyPilot Pro from version 2.5 What gives ??

Have had a v2 setup on a PC for a while, and I have noticed frequently that the connecting PC reaction to mouse movement on the display is very slow and is about 10-15 seconds behind the host PC. The host PC action is almost instant, but the connecti...

Hi, I've used the Tinypilot so far and it worked fine. Yesterday, I bought a 2 new ones and I tried to change the hostname of it. It showed me an error but now for some reason all three Tinypilots are not working. Can you please help me to resolve th...

I have a Belkin F1DC108H KVM in my homelab server rack, I bought a TinyPilot 2a POE, hoping to remotely control the devices in my rack (yes $527 investment in hope is well, alternatives are $1000+). I get VGA signal, but I am unable to control the KV...

Hi, I’m using the tiny pilot software on Raspberry Pi 4. Does the software run on a raspberry pi 5? If yes, is there a noticeable performance (latency ) advantage compared to the 4?

Hi Team, I hope all is well with you! I recently(it's been only two days) purchased a Tinypilot device from your website [private information removed] and received it promptly. I have tested the device, but unfortunately, it does not meet my needs. I...

Hi, I've used the Tinypilot so far and it worked fine. Yesterday, I bought a new one and I tried to change the hostname of it. It showed me an error but now for some reason both of Tinypilots are not working. Can you please help me to resolve this is...

Hi, I have multiple TinyPilot devices, one is working great when connected, but the other one is lagging severely. They both are on H264 setting. one follows my mouse live time, the other one lags behind at least 5-7 seconds. Is there any other setti...

Hi, I installed tinypilot from here https://raw.githubusercontent.com/tiny-pilot/tinypilot/master/quick-install when installed it uses http and seems to require no login. What are the best practices for securing tinypilot?

If I hit f12 I cant see the BIOS how do I go about see the BIOS???

We've had this voyager 2a for a few months, it was working well initially. Our building has had some frequent power outages - now I'm no longer able to connect to the tinypilot. I've factory reset the SD card 10+ times since yesterday, still can neve...

Hi, could really use assistance in setting up my tinypilot to be able to access from outside the network. I am able to access both from within my network by logging into the IP address for each device. For one of them I'm able to log into from outsid...

I plan to buy TinyPilot Voyager 2a But every time I come to see the availability of that product, it's unavailable. Can I order it from any other country? I need that product very urgently. Is there a way that I can make an advance payment to block t...

Hello I am getting an error while attempting to update my Tinypilot https://logs.tinypilotkvm.com/cYsdIGaH First line has this: The update failed: Command '['sudo', '/opt/tinypilot-privileged/scripts/update']' returned non-zero exit status 60. Any re...

I was looking for to get access of camera of my office laptop from a different country through my personal laptop so that I can take video meetings. Is that something possible with Tiny Pilot? not sure, by some port forwarding or something? Or any ot...

I bought Two tiny pilot in order to connect two different laptop but I am able to mirror one and but I am unable to mirror another laptop with a separate tiny pilot. Also can I use one tiny pilot to mirror multiple laptops?

Dear TinyPilot Support Team, I hope this message finds you well. I am writing to request the cancellation of my recent order, Order #8930, placed on Tuesday, October 8th. The delivery was originally promised within three business days, which meant it...

This is a place for TinyPilot users to;

i cannot use my mouse to contriol the remove computer. see logs below https://logs.tinypilotkvm.com/0UVhAvHc

Voyager 2a version 2.6.3 I just realized I cannot reboot successfully after enabling USB Virtual Media mode. I followed the steps, and everything "works". I can see the USB drive (/dev/sda1) mounted to /media/tinypilot-mass-storage. Here's some outpu...

Are there any plans to introduce a version that supports higher resolutions, perhaps UHD (3840×2160)?

My Voyager 2a stopped working. I Have powered off and on a couple times and it only loads to the page that says Tiny Pilot i NOT Running and there it says to restart but that does not work and the RESET intructions are only for the Tiny Pilot Pro, Wh...

If I connect the tiny pilot - what does the device show in device manager? Is it 'Tiny Pilot' or USB Key board /mouse? Would I need admin privileges on my work machine to change this?

HI Team, I received a wrong product instead of TinyPilot Voyager 2a POE I received a wrong item. It also needs C cable to power on. I was charged for TinyPilot Voyager 2a POE.

On one of our new tinypilots we've had a few weird issues that may be unrelated, after setting it up and having it work for a few weeks, we stopped being able to connect to the tinypilot and received the attached errors. We attempted re-imaging the S...

I need to buy it. But can not order it. Is it out of stocks now? Thanks, Chas.e

So I have a corporate laptop with a docking station. Its a cheap POS. I would like to use the TinyPilot to remote into the POS from my expensive OLED laptop. Assuming TinyPilot will work for this? Corporate would not be able to detect I'm remoting fr...

Hi, In our company we're using the TinyPilot to connect to office laptops and we are having an issue that we haven't seen before. The video display works as before, but the input devices (keyboard and mouse) stopped working and we cannot interact wit...

Hi, My tinypilot started asking to set a stun server for H.256 image download but when I tried to choose google or any thing it keeps going in a loop. Please assist also attached the logs https://logs.tinypilotkvm.com/fYS3JvhB Thank you

I decided to use the Raspberry Imager instead of the stock Tinypilot image on my Voyager2a… I have a few Pi’s in different places on a Cloudflared tunnel network, and I want them to be similar with VNC and cloudflared. I loaded Bullseye 32 bit and in...

I have been happily using my TinyPilot KVM until I was recently required to do a full Windows 11 23h2 reinstall. I followed the steps to fix browser privacy errors, and the tinypilot-ca cert is listed in certmgr under Trusted Root Certification Autho...

Hi folks, Reporting 2 issues that annoy me a lot since I've started using TinyPilot 2 and then, consequently, 2a. It's been multiple updates rolled out already but the issues still persist: Tinypilot doesn't detect that keyboard and HDMI cables were ...

Hi Friday it was working with no issues Now its showing this {"code":null,"message":"mapping values are not allowed here\n in "/home/tinypilot/settings.yml", line 2, column 39"}