TinyPilot

Hi, For one of my servers I need to send shortcut CTRL+ALT+END from keyboard. Apparently this is not working remotely with Tiny Pilot module I have. can you please suggest how I can enable login credential screen or send CTRL+ALT+END key so that it i...

I am NOT an IT guy. I know just enough to be dangerous. LOL. I have set up TP to my desktop computer at home. I've installed Tailscale on my laptop and added BOTH the laptop and the TP. I've run the command on the TP to discover the IP address. Inter...

Hi I am unable to change my EDID

Hi! Been using the community edition for a while now and decided to take the plunge to the Pro version for some added security for upcoming travel. The device I am using this on has some strict limitations on USB drives in terms of "Don't ever plug o...

I have not used my TinyPilot for 6 months or so, I just turned it back on, and it does not show up on the network. --NIC interface lights don't blink, they are both solid green/orange. --interface light on UniFi Switch 8 is solid green, Switch says s...

Getting an error message when trying to update software "The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2." https://logs.tinypilotkvm.com/5tgqZv0D

Hello! I'm using TinyPilot to undetectably connect to work laptop from another country. Using Tailscale connection on Windows 11 from about 2500 miles away. Both internet connections are above 500mbps. I've used this setup in the past with bearable l...

Hello, I just got my tinypilot 2a. When I try logging thru my web browsers (eg https://tinypilot.com) I get passed the [Advanced] "is it safe to continue... My browser just displays an image with a white hot cup of coffee. Any ideas what this is? Win...

What's the official stance on ipv6 support within tinypilot? My colo provider is about to turn on ipv6 support and since I don't see anything ipv6 related in tinypilot's interface, I'm wondering about official support. Thanks as always.

Hi everyone, I need some help with figuring out and enabling audio. I have a voyager 2a and did everything from the troubleshooting to get audio on my device, but I still cannot get audio. the host device has audio when I change the audio output to t...

Today I got fired for stop using Tinypoilt, I didn't use Tinypoilt by wrong way, just to contact to my laptop if I am outside my house, How My company figure it out ? how can Keep using my Tinypoilt without my new company know ? Is there any other sa...

Tinypilot isnt starting, engineio is missing. I've attempted a factory reset but unsure if it did anything support logs: https://logs.tinypilotkvm.com/Bt5gns9n

Hello, I was reviewing https://tinypilotkvm.com/faq/enable-wifi/#enabling-wifi but noticed that the article does not specify what file to modify after SSHing into the TinyPilot. In what file do I enter the following? WIFI_COUNTRY="US" WIFI_SSID="Exam...

I'd like to have the TinyPilots use both my domain and my tailnet domain to serve the content. Obviously that means changing the NGINX config to serve different certificates depending on which interface the request comes in on. Is this allowed?

How can I get some help? Logs: https://logs.tinypilotkvm.com/0lKXatkF I think this is the issue: TASK [ansible-role-ustreamer : enable Janus apt suite] ************************* fatal: [localhost]: FAILED! => {"changed": false, "msg": "Failed to upda...

Installed 256GB USB Stick, ran move-virtual-media-to-disk --uuid ${UUID} script. Script failed after timeout because image transferred was too big. (11GB RHEL 9 Image). Deleted Image, re-ran script. Rebooted TinyPilot, checked mountpoints. All looks ...

using it for a Mac mini, no screen. how to adjust the Mac display to have screen on the Tiny Pilot ?

Hello, i have 2 TinyPilots voyager 2 and everytime i try to update them thru the GUI i get the following error: Error: Failed to request latest available version: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to ge...

While troubleshooting a filesize limitation with vfat while using an external USB device that was activated using move-virtual-media-to-disk, the TinyPilot no longer boots and no longer is accessible via ssh or webpage. I'm not sure what the recovery...

i am planning to go back to my country for couple months, and trying to access my work laptop which is gonna be at my house in NY USA, is this device gonna be helpful if connecting from other country and do the work in USA without my company knowing ...

Hi team! I am able to see the screen, but can't control the device with tinypilot. Here's the tinypilot log: https://logs.tinypilotkvm.com/jZ5Aonnn Please support me. Thank you

yesterday, tailscale stopped working and not able to do sudo tailscale up via ssh

I've noticed recently that my mouse/keyboard inputs are no longer working. Video is working fine. I've tried various different USB C to C cables and USB C to A cables, including the provided cable. I've also tested on a windows PC, Linux laptop, and ...

After a Power outage at my home, the error pages says TinyPilot is Not Running when trying to access the web view. The service in SSH says the below. Any way to fix this without re flashing? $ sudo service tinypilot status ● tinypilot.service - TinyP...

I have a use case where I may be given a bootable USB stick to do an OS test build. My TinyPilot is at a remote location, so I cannot plug the USB directly into target host nor TinyPilot rear USB ports, but can instead VPN to the site, get on Tiny Pi...

Hi Recently got the Voyager 2a but my laptop has no HDMI or VGA inputs, has only USB-C type inputs(Dell XPS). Can I use this C-Hub adapter(https://www.amazon.com/dp/B0C1G6DKNX?ref=cm_sw_r_cso_wa_apin_dp_3N7RM1SAMZ3J6KYNYRXX&ref_=cm_sw_r_cso_wa_apin_d...

i know the screen is there when i plug-in a monitor. but using the TinyPilot, just give me "No Signal". i have download the log in word format or pdf format, but it is not "allowed". so how can i submit the log file to you?

I am getting "No signal" on the web interface. dmesg shows repeated message: unicam fe801000.csi: Device has requested 3 data lanes, which is >2 configured in DT Any idea what is wrong?

I'm having issues with my computer connected to my Tinypilot Voyager 2A. It was running fine for a while, but since the past couple days, the keyboard and mouse input would not work. Video can still be captured, but I can't get any input. I tried ref...

I had no problem till yesterday. Out of blue, it stopped working. It wont open on my chrome. Please let me know the process. I tried those but couldn’t possibly do anything to make it work.

Hello - I have a dell 5400 laptop that I use for work. I want to be able to use the tinypilot KVM to access this in the house. It just arrived, and sometimes it will connect and work, but it only does for a couple of minutes and I end up with an erro...

I'm having issues with the Tinypilot 2a when connected to a Dell PowerEdge R730 Server. It has some misalignment issues in BIOS and setup, but when the TrueNAS Scale OS is running its completely unreadble. Here is what I am seeing

I have two TinyPilots using Tailscale and both are "connected" according to Tailscale. When I attempt to access the TinyPilot through Chrome, the site can not be reached. This issue came about two days ago after ~6 months of flawless use on both Tiny...

Hi. I already have a TinyPilot and just want to order the video adapter. I can't see a way to do that on the Products page. Thanks.

Alright, I hope this isn't to lengthy. Currently I am working remote out of country with a VPN router and things have been good. I work 2 jobs atm, 1 uses an RSA token while the other uses a VPN tunnel to log in. - Both going through my VPN router th...

https://logs.tinypilotkvm.com/YoYZiPhk

My local mouse pointer and the remote mouse pointer are not aligned. At first I thought, oh well I'll just watch the remote mouse pointer. However, because of this not aligning, I can't get to the right quarter of the screen nor to the bottom quarter...

BIOS screen is corrupted, changing between black, green and almost unreadable. https://logs.tinypilotkvm.com/8JaLoHjM