TinyPilot

This is a place for TinyPilot users to;

Hi Guys, I'm using an RPi4 with a USB HDMI capture card. Every time I reboot the RPi4, the screen cannot capture the target machine, and it only shows the color bar display. To resolve this, I need to reboot my target machine before it will display t...

I connected my tiny pilot and for my targeted computer to my personal computer and when I try to use the computer from my personal computer I see two cursor moving I click on desire tab and it get click on another tab that I do not want

Hi, I've used the Tinypilot so far and it worked fine. Yesterday, I bought a new one and I tried to change the hostname of it. It showed me an error but now for some reason both of Tinypilots are not working. Can you please help me to resolve this is...

When shutting down the TinyPilot itself (Voyager2a PoE), I notice the fans stay on and spinning eternally. How do I know when it's safe to unplug the unit? I have already corrupted my SDcard once apparently from disconnecting too early. Is there any ...

Hi, I am getting white screen. https://logs.tinypilotkvm.com/yc0VrUEL

After receiving the TinyPilot 2a got it installed and all worked perfectly. I removed the existing monitor, keyboard and mouse and replaced with the cables connecting to the TinyPilot. Again it worked perfectly. I am using the HDMI to VGA purchased w...

On one of our new tinypilots we've had a few weird issues that may be unrelated, after setting it up and having it work for a few weeks, we stopped being able to connect to the tinypilot and received the attached errors. We attempted re-imaging the S...

Hi, I'm trying to update my Voyager 1 and it keeps failing with the following message: The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2. After my first attempt of installing the update but fail...

Hey, I just got a new TinyPilot and am attempting to use it with a new micro USB cable. At first it did nothing, then I realized if I apply pressure a certain direction on the micro USB power socket, the LED comes on. if pressure (even gravity) is ap...

Good afternoon! My company purchased a TinyPilot for testing. We are looking at deploying these to machines in our customer's production environments. (Minimum of 2 TinyPilots per site, hundreds of sites) I would like to have the option for the USB v...

Voyager 2a version 2.6.3 I just realized I cannot reboot successfully after enabling USB Virtual Media mode. I followed the steps, and everything "works". I can see the USB drive (/dev/sda1) mounted to /media/tinypilot-mass-storage. Here's some outpu...

Hi Michael, I suspect a corrupted image due to user error. Can I request the latest TinyPilot microSD image?

It is certain I am doing something wrong. I downloaded the Windows 10 Media Creation Tool. Created an ISO, uploaded and mounted it to install on a machine. The machine boots from the virtual mounted media (USB or CD-ROM do not seem to matter). Howeve...

I think H264 stopped working after I updated my tinypilot. Here is the log: https://logs.tinypilotkvm.com/8ZozEYHl

Hello, Have a TinyPilot voager that for some reason will not let me connect (i have previously been able to connect to it). When I go to the browser to try and connect, I get the message "Tiny Pilot is not running". I was able to ssh into the device ...

We are able to access the tinypilot from the browser. However, it does not do what it should - there is no video, no keyboard translation. The device is connected to a VGA port of the dell R410 server with the HDMI- VGA adapter and keyboard uses the ...

Hello, I have had this issue in the past and it turned out to be a USB-C cable I was using with the Tinypilot Power connector. After ordering a better cable, I have had no issues. I took t he system down to relocate and now that I have reconnected, I...

How do we return the unit which is not working at all?

Hi there, I've been using the TinyPilot Voyager 2a for two weeks without any problems. However, after shutting it down last Friday, it's not working properly upon restarting on Monday. While SSH access is fine, the web interface shows that TinyPilot ...

I bought a new tiny pilot. I am unable to connect to my target laptop using my another personal laptop. I tried to access all the url's provided in the instructions. But still I am unable to connect. Can you help me provide os settings for sd card pr...

Hi Im looking for a solution to control the local computer and also from the web browser. Has any one tried something similar? Computer -> hdmi splitter 1. Tiny pilot 2. Local monitor And how about using DisplayPort?

Hello, After reimaging the tiny pilot, turning on ssh, and ssh'ing into the device I try to run curl -fsSL https://tailscale.com/install.sh | sh && \ sudo tailscale up and get curl: (6) Could not resolve host: tailscale.com -bash: : command not found...

Hello - I have a Voyager 2a TinyPilot. While trying to access it this morning, I received a 502 Error: "TinyPilot is Not Running." I tried Solution 1: "Restart the TinyPilot service" and Solution 2: "Restart your TinyPilot" without luck. I have not t...

Hello, I have a Voyager 2a running Tinypilot version 2.6.3 that is giving me the "TinyPilot is not Running" browser page. My logfile upload can be found at https://logs.tinypilotkvm.com/Bh2nJXvX I set up this device at my home office last week, and i...

My job requires me to stay in California while I work from home. I connect the TinyPilot to my work laptop (which is the target PC) from June to Aug 10th, and accessed it using my personal laptop. My work laptop stayed at my home located in CA, and m...

Hi. Once I login to tinypilot I'm getting {"code":null,"message":"expected '', but found ''\n in "/home/tinypilot/settings.yml", line 6, column 7"} Can you please help?

I have a laptop with no HDMI or other dedicated video. Is there any way to use a TinyPilot without a dock?

New Tinypilot device is extremely Slow though internet is stable. each click is taking 10 secound.

My tinypilot 2's data port is no longer working. I have tried everything I could think of. I switched wires to wires that work on my other tinypilots (I have 3 others). Cross tested the laptops with the other tinypilots and they seem to work. The vid...

Hi all, I’m trying to access my MEBx (vpro/amt) setup during boot via ctrl+p using the tinypilot web ui but the key sequence is not recognized. Any ideas how to perform ctrl+p during bios post? I tried also the web app thing using safari and chrome b...

Hi, I lose connection to the GUI every time the host goes to sleep or if I trigger a reboot. Here is my setup: TESmart 8 Port HDMI KVM Switch 4K 6 linux hosts Windows Mac LOGS: https://logs.tinypilotkvm.com/zC8sNaMs I observe the same behavior across...

I got my first tinykvm and I am excited about it. This will come in very handy. However, I've had it on power on on my network for about 15 minutes and I still can't find it. The LEDs on the network port are lit. The power LED is solid red and the di...

The tiny pilot is connected and it registers on my computer in the setting with a mouse and keyboard. However the ethernet connection side, i only see a yellow light, not a green as well. I am not seeing a green light by the ethernet connection. My i...

I think this topic is somewhere in here but yes I'm having this issue of No Signal the keyboard and mouse works my system specs are the following: Alienware Aurora R15 Here are my logs https://logs.tinypilotkvm.com/wRRSB8SL

1: I love the new big text area for pasting text to my TinyPilot. That said, I sometimes paste secrets. I would like it if there was an option to mask the data being pasted similar to a password type input field. I don't believe a standard text area ...

Hello, I read https://tinypilotkvm.com/faq/own-tls-key/ but didn't find my answer there. I have a Voyager 2a with v2.6.3 and am using it with Tailscale for anywhere access. All working great! I use macOS. I'd like to avoid the big red Chrome warning ...

I bought one of those in the past, and I would like another one for an additional Pi. Are those still available? If not, I'll have to use a USB C to Go splitter and USB power blocker. Thanks in advance.