TinyPilot

This is a place for TinyPilot users to;

I connected my TinyPilot to a Raspberry Pi 5. I can see the screen but the keyboard and mouse have no effect. RealVNC by contrast works just fine.

My company has some draconian security mandates, including many that affect productivity but make nothing more secure. Well, they were able to detect that for a time period, I have a TinyPilot connected to my machine. How did they detect this? Was it...

Hi, I want to use my TInyPilot like a peripheral. I want to block the USB ports on it such that no one can connect any USB device to it and it should also not be visible i.e HID Interfaces and USB not visible. I only want to use it using Type C port ...

I ordered TinyPilot, I did setup. I connected HDMI and Data cable, In display settings I don't see any other display with name kvm or any other. This device is not working. I want return the device. Send me the return label.

We recently purchased a new TinyPilot a month ago. We plugged it into our network but do not see it in the ARP or MAC tables. We tried this on a couple of different switches, but it is not getting assigned an IP address. I tried rebooting it, but it ...

We just purchase a new tiny pilot last week. plugged it into our network and do not see it in the arp or mac tables. tried this on a couple different switches. We get the red light that stays on and the green light flashes 3 times and then 4 times. D...

Logs: https://logs.tinypilotkvm.com/8gfHpwcV ● tinypilot.service - TinyPilot - RPi-based virtual KVM Loaded: loaded (/lib/systemd/system/tinypilot.service; enabled; vendor preset: enabled) Active: active (running) since Thu 2025-02-13 13:34:47 GMT; 1...

Resolved, and it working

Hi, I just purchased the TinyPiloy Voyager 2a (non-PoE version) and I want to somehow use it with my 4-port Tesmart KVM switch so I can have KVM access to multiple PCs that are connected to the Tesmart KVM. I read a few posts on how this can be done ...

Hello Tinypilot staff, I can't get H.264 to work. I have updated to 2.6.5, here is the janus status log: ● janus.service - Janus WebRTC gateway Loaded: loaded (/etc/systemd/system/janus.service; enabled; vendor preset: ena> Active: active (...

I have a new tinypilot that i am trying to set up and im not able to connect to it. I have it connected to our DHCP network, and Im not sure what's happening with it. thank you in advance for the assist.

I've just received the unit. Via PoE and via AC adapter, the unit will NOT get an IP address on my LAN. I can only assume the boot process is running into an issue somewhere than I cannot see. I see link lights. I've restarted the switch, power cycle...

Hello, We would like to use TinyPilot to remotely install Windows for our customers without requiring any user intervention. We have made several modifications, including connecting an external drive, a USB with Ventoy, a USB hub to minimize cable cl...

Hi - Brilliant device! Unfortunately, I can't seem to get KB/mouse activity. I have the "Hobbyist" kit. I'm using this to connect to a security-camera NVR system (a ReoLink RLN16-410. The video capture is perfect, but no KB/Mouse - any ideas / sugges...

Hi Currently I am in Canada, I purchased the product from here which is 110Volts. If i move to different location like India it is 240V. Will this product support ? If not what's the solution ?

I've had the tiny pilot for several months. This morning I noticed a grinding noise which turned out to be the TinyPilot. Is this covered by warranty? if not, are there specs for the fan that I can order a replacement?

I know there is multiple reports asking for two way audio, but recently PiKVM included this feature and really wanted to know if there is work in progress to do the same in Tinypilot or any idea to include it in a future version. This will bring a lo...

Hello, I have a work laptop that I work from home with and would like to travel but I am unable to leave the US with it. My work laptop doesn't allow me to download or install programs. To my understanding, both laptops need to be fairly close to one...

I have an Hamachi VPN. I have a TinyPilot which mostly works - I have to override the IP for tinypilot using the hosts file if I am on a network where my local address is not a 192.168.., but other than that, it works. I want to get a second unit, on...

I had the tiny pilot device for about 1 month now. It was functioning fine so far. But lately I started getting green Lines on the screen (On my personnal computer not the target computer) when using Tiny Pilot. Especially when moving the mouse. I br...

I need to connect the Tinyplot UI interface from different locations, specifically using different internet connections that are not shared. This is necessary because my work requires frequent travel, sometimes abroad. If there is a solution, please ...

Enjoying trying out our first TinyPilot. There is great potential with a few changes. I'm willing to do the work or collaborate. I haven't dug into the device coding yet and don't really know what I can and can't change. For broad adoption in our glo...

Hello! I got my TinyPilot Voyager 2a PoE and it is working great. I'm using the wall plug for power for now. Does there happen to be a way to query the TinyPilot from the linux command line and tell if the Power-over-ethernet is also being supplied? ...

Hey guys, Trying an install on RPI Zero 2 W, Bullseye 32 Bit printenv does show FORCE_INSTALL=1 as set Doesnt seem to actually force the install? What am I missing here? curl --silent --show-error https://raw.githubusercontent.com/tiny-pilot/tinypilo...

OK I just get another new Tinypilot , I found a new feature for stream video. if there is any possibility for voices in 2 direction - work as speaker and mic ?

I am accessing TinyPilot remotely over 8443 > 443. However when doing this it flips to mjpeg and I tried turning the STUN server to Google and to GMX, but the issue still persists. On the local network it is fine. Do I need to also forward any STUN p...

Trying to upgrade from 2.5.0 to 2.5.4, the link to the log is here: https://logs.tinypilotkvm.com/pj6BgiHx Seems like perhaps two error logs: TASK [ansible-role-ustreamer : check if legacy Janus package is installed] ***** fatal: [localhost]: FAILED!...

Hi there, Having an issue with playing audio and streaming using H.264. I have been through the other tickets and appears that everything is working and the Janus server is up and running and active. Do I need port forwarding? I am trying to access i...

I could not tell from reading the website. Does TinyPilot allow me to reboot the computer it is monitorinig, say if it is in a hung state? Thanks! - Jason

I bought a tiny pilot KVM Voyager 2 4 months ago and used it without issue. Recently I am gonna reconnect it and use it but have some errors on the web browser like this. import glob import os import subprocess import sys from distutils import log fr...

I have verified the network cable and hub are all working but I can't get the Ethernet lights to come on the Pi, nor does it show link on the switch. Any troubleshooting I can do or is it a bad Ethernet on the RPi?

I am using a Bluetooth device that converts a wired USB keyboard and mouse into a Bluetooth-enabled combo. This allows me to plug in a USB receiver for a keyboard and mouse combo into the Bluetooth device, making it accessible via Bluetooth. I am try...

Hello, the recent update to accommodate clicks from touchscreen/iPhone has been a game changer, however is there a way to click a drag? Im unable to move and resize windows.

Is there a way to transfer a .exe file to the target machine ? Gone through some video about USB Devices Over Network with Raspberry Pi https://www.youtube.com/watch?v=gBCNLs_5pwM https://www.youtube.com/watch?v=KX7IY_Xft0k Especially check this last...

I don't have router at home any only have wifi. Is there a step by step instructions to set this product up?

Can someone help me figure out what's the problem, I can get access the web interface but I cant get the screen to work, tried hdmi and the VGA. Also the log shows the usb cannot be found? I tried uploading or posting my log but it says has to be an ...

From the basic start up screen I was able to access the web interface that the TinyPilot voyager2 was connected to. I would prefer to lock down the web interface by creating 1 additional login that (for the web interface) does not have the ability to...