TinyPilot

I can see the screen of the target computer, but I can't interact with the keyboard or mouse, the only thing that responds is actions->keyboard shortcuts ->ctrl alt delete

Hello, Can 32 servers be connected to 1 TinyPilot? For example via 4 https://www.amazon.com/MT-VIKI-Switch-Switcher-Desktop-Control/dp/B08K9235LJ/

I have the Voyager 2a. None of the following addresses resolve. https://tinypilot/ https://tinypilot.local/ https://tinypilot.localdomain/ I don't see an ip address for the tinypilot when looking at the routers dhcp table. The status lights on the de...

I just installed the latest "community" version via https://github.com/tiny-pilot/tinypilot#simple-installation and it seems to work but I get no video signal. This exact setup was actually working perfectly fine just before this, but I switched to t...

Hi, i tried to update my tinypilot today but it failed with some error( i forgot to take screenshot): tinypilot/privileged/script not found/updated later i tried to power restart the tinypilot, but it no longer working >>>> The disk activity LED will...

Hi Support, I have one Pi-KVM which is working fine with every Intel Core i Series server. However, when it connects to some of the Intel Xeon E3/E5 servers, it will have display problems. For example, Intel Xeon E3-1220v5 and E5-2603v3. May I know w...

Just a heads up, I was having issues with my space key not being detected every so often (the key registered in the bottom right corner of the tinypilot session but was colored in red). After checking if it was my keyboard, my browser, my USB cables,...

Hi, I am not able to access my Voyager 2 (latest community version) via https, but I can access via http (without the s ). I have tried all the following but to no avail: https://tinypilot https://tinypilot.local https://tinypilot.localdomain However...

I purchased the tinypilot voyager 2a, i did all the necessary setup and i can't access any of the 3 interfaces. Error states: This site can’t be reachedCheck if there is a typo in tinypilot.local. DNS_PROBE_FINISHED_NXDOMAIN How do i fix this?

it is the output device...how do I disable it? or at least put it as 'speakers' or something more generic sounding

Hello. I am clueless and found this via Google. Desired use case: I have a headless Mac Mini that I'd like to be able to remotely control (KVM) even when (regular) OS is not working (recovery mode, pre-boot options, etc.). Assumptions: this product p...

Is the device has ATX Control? I mean for turning on/off my PC by using this tinypilot device. If there is a power outage at my home and it is restored, will this device automatically startup? Thank you

Hi, I'm trying to update my device using the GUI but it stucks at «retrieving update logs from TinyPilot device ». When I try to show logs on the menu it says «error retrieving debug logs». on ssh any command return /etc/sudoers: syntax error near li...

Would like to be able to keep remote device awake that doesn't have typical "sleep" settings.

I have a tiny pilot voyager 2a device with one inch horizontal offset for mouse cursor. I have tried changing resolution of the target device, setting it to different resolutions didn't help. I have tried changing the EDID how it's mentioned in the s...

Hi , I am trying set up TinyPilot with my Macbook Pro(macOS Monterey) but audio is not working via HDMI. screen and keyboard/mouse work well but no audio receiving it. I also tried select "Sound" output as HDMI but it says " The selected device has n...

unable to login after password update , tried to reset by mounting SSD card.. do not see file. On the microSD's root partition, delete the file /home/tinypilot/tinypilot.db.

Hi, TinyPilot is not booting up and I would like to reset it. Can you please send me the image that I can use to reset as my subscription ended last month? Thanks,

Great product! A web page I developed has a select box that won't work via tinyPilot, but fine otherwise. Using svelte and https://github.com/rob-balfre/svelte-select If you like, I could build a minimal example with source code.

Hello I couldn't afford the TinyPilot gear but I did buy the HDMI USB capture card I've got TinyPilot software installed and I can see the KVM with target screen fine, that part works ok I couldn't get the keyboard working properly and I did some inv...

May I know that is there any solution from your company to make Tiny Pilot can "wirelessly" connect "more than one" server/device? Kindly advice even if there is any way to achieve one of the objective (wireless or connect more than one) Thank you.

Hi, I'm trying to update and it keeps failing with the following message: The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2. I first thought it was due to read-only mode, so I turned that off. U...

Hi Team, I hope you are doing well. what is the best solution so far for doing teams calls remotely ? I'm traveling and I want to continue doing calls from my laptop. I know Tinypilot is not made for that, but I wonder if someone found a solution. th...

Similar to the question here. Browser hot-keys One problem of running tinypilot, even if in app mode, is the operation system hot keys are still in effect. This is a big problem, for example I might want to switch workspaces in the tinypilot connecte...

I just got a Tiny Pilot and I am excited, however I have some hurdles to cross. I do not have a router where I am staying, currently connected to a hotspot. This prevents me from having an IP address associated with my TinyPilot My TinyPilot is plugg...

We are experiencing a few problems with the Tiny Pilot and was hoping for your input. As background, we have a Tiny Pilot at a customer in Germany, which we are intending to use to install windows, to a connected laptop via the ISO mount feature. We ...

Web GUI error "The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2." SSH error "TASK [tinypilot.tinypilot-pro : get TinyPilot repo] ************************************************ fatal: [localho...

Can i able to transfer files using the tinypilot and tailscale ? I can able to send the file to tinypilot. I don't know where to check n download to target computer Kindly check the image n reply back In my tinypilot device next to lan cable 4 usb sl...

Hi all, I just received the TinyPilot 2a and it worked for 10min just fine, when I rebooted it is not working anymore, it is not detected on my network and after diagnosis, it says TinyPilot is not on your network. I have checked on your forum and I ...

Wow ! That almost drove me mad trying to authenticate myself using my password manager ! hahaha Just realized that our newly acquired Tiny Pilot Voyage (not V2) with latest firmware 2.3.1 substitutes characters during a simple copy paste from host to...

Hi. I have followed the instructions mentioned here https://tinypilotkvm.com/faq/change-edid to change the name and entered the commands as is. However, the display name in the Mac is still showing as TinyPilot. Is there any thing additional that I h...

Hello. Is there any way that we can cut and paste, from one computer to another where the other the one under Tiny pilot

Hi there. I found TinyPilot online while searching for a solution that would be able to remotely control and view 4x bare metal 1L PC’s at a full bios/boot visibility level. I have these going into my home server rack - they are based in the rack alo...

I'm hoping to remote control to a workstation that requires Cisco AnyConnect to log in. Would I have any challenges using TinyPilot?

I recently bought TinyPilot , Initially I had issues with Latency but ever since i switched to H.264 the latency issue is no more but now I have new issue where monitor keep disappearing after few seconds I can still see the keyboard . I am using chr...

Hi, I am trying to install TinyPilot on Raspberry Pi 4 Model B 2 GB RAM. I installed the Pi OS Lite 64 Bit. When I run the install with below command as root, curl --silent --show-error https://raw.githubusercontent.com/tiny-pilot/tinypilot/master/ge...

Hi, I just noticed, that I cannot find a way to get the "@" (at) sign used on a machine that is connected to the TinyPilot. What works: a.) Pressing directly (no TinyPilot involved) the @at sign on the remote machine (remote: machine where TinyPilot ...