TinyPilot

{"code":null,"message":"expected '', but found ''\n in "/home/tinypilot/settings.yml", line 6, column 7"} SSH is disabled

I utilize tailscale to remote from my Home to Host tiny pilot device. At Home, I have both my desktop and macbook on the same network and both are on tailscale along with the tinypilot device. I have no issues on my desktop, however when I connect wi...

I have my work laptop connected to tinypilot, Which I access from home sometimes to do emergency tasks. But I am unable to use my keyboard and mouse from remote side now. I have tried searching for the issue and it's solution but I cannot find any so...

I'm on my third TinyPilot (NEW Voyager 2a) and have encountered this issue on two of them. I'd like to restart the TinyPilot remotely every day (ish) when the connection feels sluggish. Unfortunately, this routinely prevents me from connecting to the...

Hello, Just did an install of the tinypilot using rpi4 and the specified hdmi dongle, Got everything up and running quickly, but when I try to access video I get the rainbow screen, while the keyboard does function. I tried to reboot replug, and trie...

Hi, I just recently bought tinypilot voyager2a. It was fine when i connect within local network. However, when I try to access it over the network (using remote.it), the mouse latency was extremely long (~4-5 seconds at least), rendering it unsuable....

I'm getting this error when trying to switch to H.264. I've tried disabling and re-enabling it then rebooting, but same issue. "TinyPilot failed to stream video output from your target device using H.264 compression." How can I fix this? Logs link: h...

I am getting following error while trying to use H264 format for video in Setting when accessing Tinypilot machine remotely(via IP). but H264 works fine when tinypilot machine accessed in LAN. Log https://logs.tinypilotkvm.com/EsK5VOqk Any suggestion?

Hi I am planning to use in our remote sites. Can i keep tinypilot connected on power forever? As remote sites are always on and server dont have remote management port. Your tinypilot is working perfectly but i am not sure if i can keep powered on fo...

Hi, i work from home using a company laptop but wish to travel outside the country using my personal laptop (leaving my work laptop at home) to access the company laptop. i wish to know if the company can check if accessing the device from another co...

Hi there, I'm trying to evaluate TinyPilot but I didn't discover detailed documentation about its configuration or features on the website. My apologies if I missed something obvious. Specifically, I would like to understand if the devices can be con...

(Note: Due to limits on URLs in the post, I intentionally broke the last URL...) Hi, As my first post to the forum, I thought I'd contribute a list I compiled... (Why did I do this? https://github.com/tiny-pilot/tinypilot/wiki/KVM-compatibility could...

I recently purchased a TinyPilot Voyager2 to remotely manage a client target system. The target system is a Dell Latitude 5490 connected to an external monitor. When I connect the TinyPilot V2 to the target system in the extended display setup, every...

After OS upgrade, mouse and keyboard using tinypilot is not working. Can you please help me on this?

I am about to purchase the voyager 2, would I need to pay some import/customs fee in Canada since the device is coming from the US?

Trying to get this setup in our TwinGate network. To load the connector it needs 64bit OS. Does this device meet spec or can I upgrade it to a 64bit OS?

I'm using USB C Hub Adapter for MacBook to connect tinypilot to MacBook. Everything works so smoothly but I'm unable to hear the sound in H264 mode. I tried many ways but can't do that.

update failed from 2.6.2 to 2.6.3. here is the log, please help. https://logs.tinypilotkvm.com/lgOWIg3n thanks --Jason

Sounds not being transmitted from laptop that is controlling the host. I can hear what’s sound is coming from host but I want my laptop controlling the host to transmit sound in host.

Hello as i was using Tinypilot normally i started receiving this error. I then went ahead and restarted my Tinypilot Multiple times but now it is not even gettung discovered in my Network.

Suddenly I am getting MJpeg from today onwards Here is the logs https://logs.tinypilotkvm.com/yXb29Y2l

Hello, We have trouble with our Tinypilot, connected to an LNC 2200 MW. Mouse on the computer and mouse in the browser are misplaced : if i go to the left, remote pointers is on the right. On the right of the screen they spread to the left. I cannot ...

I just unboxed my new Tiny Pilot and hooked it up. Works great, but the only problem is that I don't have sufficient instructions on your site of where to go to put the info in after ssh into the box. Please advise as to step by step what file to use...

Is it possible to add accounts for viewing only to the TinyPilot web session? We have people we want to be able to view the current session, but can't interact with it.

When I reboot the tinypilot the keyboard and mouse stop working. Video still works so I can see that the USB device not recognized notification pop up on the remote computer. If I go to the remote computer and disconnect the usb cable and plug it bac...

I am unable to see the screen post the upgrade. Find the link which has available logs - https://logs.tinypilotkvm.com/GGePC7JG

The cooling fan on my TinyPilot has started making a lot of noise. I can unplug it and let it cool down to room temperature, it is quiet when it starts again but then gets noisy after an hour or so. Is there a fix?

Persists across reboots, does not go down after it's been up a while, even if I'm not connecting to it. Running off provided USB C power supply. Only thing customized is adding tailscale. I popped the case to see if it was just some obstruction in th...

EDIT: I see that Bookworm isn't supported yet. Should I add these issues to GitHub? I did a search for "Unable to correct problems, you have held broken packages", but didn't find anything. Let me know if you want a Bookworm install for testing, othe...

I have an old 2020 Era, RPi4 w/ 2GB RAM, TinyPilot "All in One" with a GeekWorm C779 HDMI->RPI Camera board, running Buster. If I wanted to "refresh" it, could I just replace the SD card with a new BookWorm-based RPiOS and install the latest TinyPilo...

I bought a TinyPilot "all in one" in 2020, but the pandemic threw a monkey wrench into the plans and I'm just now restarting the project it was going to be used for. Is there an easy way to determine which model it is? It's a 3D printed case, w/ a fa...

Running TinyPilot Voyager (original) with pro license software. Prior to recent upgrade to 2.6.2, video from my target machine (Microsoft Surface Laptop 4) worked in both MJPEG and H.264 modes. I only boot the laptop once every few weeks so I upgrade...

When my TinyPilot is attached to my Windows 10 computer, the only place where I see "TinyPilot" is under the Audio Inputs and Outputs section. "TinyPilot Intel(R) Display Audio" also appears under the audio outputs selectable on the taskbar. When I r...

Hi, Am I correct that all TinyPilot devices now ship on Bullseye? Bullseye supports adding RealVNC as a server/service. I recall other threads here saying VNC wasn't supported; is installing it via Bullseye (apt -y install realvnc-vnc-server" allowed...

Edit: Resolved after changing video setting to H.264

I see a menu option on the Voyager 2 for Keyboard shortcuts and all it has is CTRL-ALT-DEL. I want to add ALT-TAB to it, as well as others that I use. How can I do this?

Hi, when I try to log in to tinypilot via SSH, I get this: @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ @ WARNING: REMOTE HOST IDENTIFICATION HAS CHANGED! @ @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ IT IS POSSIBLE THA...

I'm using two tinypilots and one of them started to make a lot of noise. It's coming from fan and not sure how to fix it.

This site can’t be reached Check if there is a typo in tinypilot. DNS_PROBE_FINISHED_NXDOMAIN This site can’t be reached Check if there is a typo in tinypilot.local. DNS_PROBE_FINISHED_NXDOMAIN This site can’t be reached Check if there is a typo in t...

i installed tinypilot in my raspberry pi 4b , i runned its web interface in my laptop its working fine , but its not showing the security option in system menu and i can't ssh into my tinypilot , i tried with ip and used default password "flyingsopi"...