TinyPilot

Aside from network, is the TinyPilo video latency primarily a product of the Pi CPU limits or protocol/software?

Hello, I am using Raspberry PI Zero and Raspberry Pi OS Lite (version from October 10th 2023). When I run this script from the repo curl \ --silent \ --show-error \ https://raw.githubusercontent.com/tiny-pilot/tinypilot/master/get-tinypilot.sh ...

Hi I’m trying to set my tiny pilot but it says that my host can only be accessed from a local device? How can access it from device that’s not on my local network. Thank you

I am using a TinyPilot Voyager 2a to remote into my windows laptop. I have a perfectly good tinypilot setup working already, but am now having issues with a second setup that I finished yesterday. I put everything together and all was working well. T...

I plugged two tiny pilots into a remote workstation that has two video cards. I was able to see two each of the tiny pilots but can only use the mouse on the primary tiny pilot. In order for this two work it word require the following: 1)plug the USB...

I have been experiencing issues with my Voyager 2a. Specifically, the cursor and all UI elements are "jittery," and the audio view browser is no longer working. When attempting to update the device, I get an error that the disk is full. I am only abl...

I need remote access to the KVM when outside of my own network and I don't want to open any inbound connection ports on my firewall. I would like to install the zerotier agent on the KVM. If I am not mistaken TinyPilot allows SSH access to the RPi OS...

Hi there! I purchased the Voyager 2a and followed the following instructions: https://tinypilotkvm.com/instructions/voyager2a/v1 It's not really rocket science. I plugged in the power adaptor to the wall and plugged the USB-C side of the power adapte...

I have a tinypilot in a private network where I can run DHCP but not DNS services and cannot route with NAT. Each device gets a unique IPv4 address and I can ssh in to the tinypilot (having set it up in a different network). I have the dreaded 502 Ba...

TinyPilot is fantastic and we could use it for medical assistance in remote areas. But for a certain device which I want to take over, there is an horizontal offset of the mouse cursor. The screen is projected but with black vertical bars on the side...

My host device is an Intel NUC NUC7i3BNH. I've installed Windows Server 2022 on it. TinyPilot works fine to show me video of the NUC booting (I can see Intel NUC logo and F-key prompts) and the Windows login screen. This functions fine and as expecte...

My tiny pilot has stopped working, Video capture not working, boots up intermittently, fan sounds underpowered. Will a standard USB-C supply work as a replacement or for testing?

This might be more of a question for Tailscale but I successfully installed Tailscale using the instructions on TinyPilot. I got the URL and authenticated via Tailscape login. Only issue is I didn’t realize that I need it to be authenticated to a dif...

I have followed: https://tinypilotkvm.com/faq/factory-reset to write the image to a new, larger SDCard. I want to have a copy of an iso on the SDCard to use to image the machine the tiny pilot is connected to. My SDCard is larger than needed (512GB),...

I see a menu option System:Virtual Media It allows mounting from my desktop or a url. Is there a way to mount an image from the sdcard in tinypilot (preferred) or from the USB port in tinypilot?

So on youtube there is a Theatre mode where it kind of goes fullscreen... I am mentioning this because I have G9 Monitor which is 5120x1440 resolution. I would like to Fullscreen TinyPilot at half of the screen the screen resolution but thats not an ...

I have an idea for being able to use 4K at 60fps if you have a high end capture card. Suppose we have 3 computers and a capture card that supports 4K @ 60FPS 1 Windows computer 1 Mac computer 1 RaspberryPi Proposed TinyPilot Configuration The Raspber...

I have tinypilot working somewhat, however the display constantly flashes no signal every 2 seconds or so. Can anyone tell me what is going on? Log link: https://logs.tinypilotkvm.com/pkOPl3qW I have this connected to the vga port of a Dell R430 serv...

TinyPilot worked well when I am using macOS Ventura 13.1, but it shows black screen after upgrading to macOS Ventura 13.3. Keyboard and mouse works, but HDMI output is just a black screen. It was same whether or not I select MJPEG or H264 mode. I tri...

Right now, my tinypilot is in USA, and I am connecting my computer to it from another country. If someone moves the tinypilot to a different location for me in USA, will my computer still be able to connect?

I have a tinypilot that has been working great for a few months but recently stopped. We're unable to connect to it via any of the 3 listed urls. I've read most of the other posts on here about what to try. Here's what I've found: We can see the tiny...

I am using the TinyPilot solution in remote areas without wifi/ethernet but with adequate 4/5G coverage. I create a wi-fi hotspot with my phone to connect the TinyPilot which I control remotely using Tailscale. Has anyone tried to directly insert a S...

So I have a tinypilot setup and I feel like the quality settings do nothing. Switching from Mjpeg to H264 doens't change anything, and both of them look the exact same even at the lowest possible quality setting. I get around 2 seconds latency. I did...

I upgraded to tinypilot pro 2.6.1. The screen size is getting small when I switch to another PC ( I connected TinyPilot to HDMI 2-ports splitter with Mac-mini and NUC). When I use MJPEG, there is no problem in screen size. But If I use H.264, The scr...

When logging to Tiny Pilot the latency is disturbing. Also, it seems I can't use the mouse button to click on options while in BIOS mode.

Hello Recently, I was trying to update video settings to improve the remote control speed. It worked initially and I tried multiple video settings update for almost 1 month But right now, the video isn't rendering anymore and couldn't touch video set...

Hi, I was using tiny pilot from couple months but from today I am getting error on left side of the screen that it is disconnected, and I cannot click on any buttons with my computer. What is the solution of this problem.

Hi, I couldn't find this in the docs, apologies if I missed something. TinyPilot looks great but can you please answer a few security questions: Is there any cloud connectivity or transfer initiated by the TinyPilot box? i.e. what is the back door ri...

Touch events don't work on my Iphone mobile browser. Also audio output functionality is missing for Mac Pro models.

Hi I have a TinyPilot Voyager 2 PoE puchased Oct 19, 2022 ORDER #4527. Starting today we have no lights on network and the unit is unreachable. We have checked cables, nettwork config and have isolated the issue down to the unit itself. Please advise...

Good Evening! I was originally brought here via the now deprecated project known as Key MIME Pi. USE CASE: I am using daisy chained USB Synchronizers where, at a hardware level, all they do is repeat my keyboard input. Generally speaking, I use these...

Our Tinypilot KVM ethernet port died less than a week after receiving it. Tested on 4 switches and 3 different cables. What do we do?

Hello, we have an environment where all of the IP addresses on our networks have to be static. I'm readying two Tiny Pilots to send to a remote location, and they need to have the IPs set for the network where they will live (no DNS). Everything is s...

Hello! I bought a device recently and generally I'm happy, but there are some limitations which webview is having. Say, I cannot use Alt-Tab to switch apps. I cannot really open it in fullscreen (it says "to return press Esc" and of course while I'm ...

I've recently updated my tinypilot with factory reset. But it's unable to transmit audio on mac. What should I do?

Can I connect to the TP with some native VNC client like this https://www.realvnc.com/en/connect/download/viewer/ , and if not - why?

Hello, I am not interested in audio capture but am interested in modifying the EDID. Can I do that with the older model? Also, besides audio capture and case differences what does the 2a have that the 2 doesn't ? Thanks,

Hi, I am using HDMI to HDMI cable. My video quality is poor then target laptop to personal laptop. How can I improve high resolution video using via HDMI?

Let me start by saying that I've run through most of the previous forum entries on the No Signal issue. I've created a shareable link of logs. https://logs.tinypilotkvm.com/2E7NjSo3 I'm also attaching build details. This is the TinyPilot Hobbyist ver...