TinyPilot

Hello Im using these commands to update and download files for my raspberry: sudo apt update sudo apt full-upgrade curl -sS https://raw.githubusercontent.com/mtlynch/tinypilot/master/quick-install | bash - sudo reboot When i discovered that this link...

Hi, i want to stop a remote laptop to fall into sleep mode. Thats why i plan to send every 5 minutes a character via /dev/hidg0. Via command line it works like a charm but via Cron it doesnt work at all. I also created a cronjob with sudo - same resu...

Just received my TinyPilot Voyager 2 kit, already running 2.5.0. Connected it to my Minisforum TH50 Mini PC, and neither the mouse nor keyboard was detected. I noticed the following entries in the log file... Oct 30 02:54:42 tinypilot python[615]: Pr...

Hi, I am setting up a new install of TinyPilot on my raspberry Pi 4. I am having an issue with the install. The task that is failing is TASK [ansible-role-ustreamer : install Janus Debian package] ******************* fatal: [localhost]: FAILED! => {"...

Hello, I have an desktop, with only usb 3.0 and no 2.0... it has an usb connector also, But i saw online that usb 3.0 could make some problems with the keyboard and i am having that issue.... Is keyboard supported with usb-c to usb-c? Or is there an ...

The device was working very well. I decided to adjust the jpg quality to see if I could improve latency. After I did the device started to and has continued to disconnect my session after a few minutes. Refreshing the browser and going past the certi...

Hello, I lost mouse functionality in one of my TinyPilot Voyager 2 PoE KVM's (I own 4 of the exact same model, I love'em). I try updating Windows thinking that may have been the culprit but after installing all optional updates and several reboots I ...

Hey folks, I'd like to verify that conceptually a wiring plan I'm scheming will work before I spend the money. I'd like to run: TinyPilot USB-C's Data line -> a USB-C-to-USB-C cable -> a USB-C-to-USB-C keystone jack -> a USB-C-to-USB-A cable -> a Mac...

I love my TinyPilot, which allowed me to shove my server into the basement where its noise would not disturb me. Then the dust in my basement killed the server, so I took the opportunity to moveit back to my office, along with the TinyPilot, and sadl...

We are having an issue with a TinyPilot we just deployed. Keyboard and mouse are working but we are not getting any video. Just get a message for No Signal. I saw the display pop up for 2 seconds and then went back to No Signal. Anything we can try? ...

Hi, I bought a tiny pilot voyager 2 everything looks fine except for the fact that the image in the streaming is only for 7 seconds. This are my log, I'm new in this :( Logs 2022/11/10 16:40:55 [error] 1268#1268: *53 upstream prematurely closed conne...

It seems something went wrong with my TinyPilot Power Connector. It has no LED and does not provide power to my Pi. Any idea would could have gone wrong?

Hi, our new TinyPilot shows a flickering image that show a different colorful distotion every second, with the original video signal showing in the background. I have video and image, but they are too large for upload. S/N 0001648005993072 We tested ...

Hi, Trying to use TinyPilot to view the GUI presented by the Ubuntu live disk when you select "Try Ubuntu" but colors are so badly distorted its not usable. Is there a configuration to avoid this?

Hey guys, our TP has been perfect for months. Suddenly, I've got about a 1 second delay between each key (!) arriving at the host. I've rebooted through the UI and CLI, no change. I grabbed a shareable log, https://logs.tinypilotkvm.com/DdW0xGP3 if t...

[private information removed]

Hello, Question, does there need an videocard to make the usb keyboard to work? I have an raspberry pi3b and i have an usb a to usb a cable, should this just work without an video caption card plugged in? I have an video caption card buyed but still ...

I'm trying to install Tinypilot on my new Pi4 running the latest version of Pi OS Lite using SSH with the simple installation command found on GitHub, but keep getting a "builduStreamer fail" error time and time again. TASK [ansible-role-ustreamer : ...

Hi, It seems like I setup wireless SSiD on my home wifi and it’s stuck to it but when I change it to hotspot it stays connected and only works to home wifi or is this a Tailscale issue?

My Tinypilot install seems to be running nginx 1.14, which if I'm not wrong is deprecated. Is it possible/easy to update it?

Does the Tiny Pilot pass the network through to the machine it is connected to or would we need to have a second network drop or small switch to keep Tiny Pilot and the computer it is controlling connected to the network?

Anything magic about cables for from USB-C Data port (V2) to USB-C (target device) versus C to A? I tried with a few cables and it didn't work - I had to use a laptop-USB hub (C-->A*4 on the target device) and the A-C cable that came with the Voyager...

How can i use tinypilot to show another external monitor besides the laptop monitor ?

After reboot of the tinypilot device (purchased with pre-programmed sd card) due to power loss nginx reports error 502. tinypilot service is active but reports import failure: root@tinypilot:/home/pilot# systemctl status tinypilot ● tinypilot.service...

I have an 8 port KVM with Hotkey switching. It allows me to press some keys on my keyboard to switch to another port on the KVM. This is very handy. However, the Mouse on the TinyPilot Voyager 2 will not work through the USB port on the KVM that allo...

The Linux Magic System Request Key Hacks (https://www.kernel.org/doc/html/latest/admin-guide/sysrq.html) is just a fantastic way to interact with Linux when it's being "naughty". PiKvm has it implemented in their "Shortcuts" menu, and I have used it ...

HI, Already i connect one Tiny Pilot with one target machine1. I try to connect new Tiny Pilot for new target machine 2. But in my 2nd computer showing only 1st target,not showing 2 nd target also giving error 404

Sorry for the noob question. I'm considering getting the Tinypilot Voyager 2. What I'm trying to do is be able to access a friends PC via KVM from a different country, so over the internet. Obviously if the whole thing only works within a LAN that's ...

Here is the error message: 'The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2.'

We have purchased a TinyPilot Voyager 2 with the intention of connecting/controlling Dell Latitude laptops at a remote site. We have tested the setup we were planning locally, and we have found that when the laptop reboots, the TinyPilot web portal d...

Mouse position is correct at the top-left corner of the virtual desktop. As I move the mouse to the bottom-right, the cursor on the host machine moves half the distance. By the time I have reached the bottom-right corner, the host cursor is thusly in...

First off love the software veryyyy convenient!! Previous web-gui updates have worked without issue, until now. The logs show "ERROR Update process timed out" --- After multiple reboots, I am at a loss. Is there a bash script to run the update throug...

I saw that chrome app enable cmd-t and cmd-w to work properly according to this: https://tinypilotkvm.com/faq/browser-hotkeys. When I open a browser on the target device and press cmd-t, it correctly opens a new tab in the target device. However, a c...

Can this be done? my thinking is I would need 3 things The TinyPilot an HDMI Splitter so I could see my screen while I'm in the office and the TinyPilot has the HDM as well to access while I'm away Possibly an LTE router for internet access to the Ti...

Using the VGA to HDMI adapter, I'm getting terrible picture on a Dell PowerEdge R240 server (we have 4 of these servers and they all do the same thing). The screenshot below is of the Ubuntu Server install screen using the ISO image uploaded to the T...

Hi, I need hardware setup for office laptop with my personal laptop.

Hi, In my home network, how to connect 2 target machines? need a 2 tiny piolet? then,how can i identify target 1 to one laptop and target 2 in another laptop? I have only one internet connection in my home.

I connected TinyPilot to Windows and Mac, and I see Toshiba-H2C audio device on both laptops. Is it a way to disable the audio device so it is not recognized by laptops since TinyPilot doesn't support audio anyways. Or rename the audio device from To...

I just received my TinyPilot today, and it works great! I am connecting to a MacBook Pro 13” M1, and everything works as expected. I had just one question. Is it possible to include sound over the HDMI link? Certainly sound can be transmitted via HDM...

Issued a reboot to the system and after reboot, trying to connect to the web service results in a 502 bad gateway. ===================================================== Checking logs, see the following being repeated over and over. Oct 17 08:31:23 02...