TinyPilot

Hello, If i connect my Ipad with USB C Hub with HDMI, Keyboard & Mouse Output and connect same to Tiny Pilot it will work ? My main purpose is to remote control and monitor of IPAD Installed at remote location. Thankx in advance .. Regards, Vipul

Hey, I am connecting to mac using tiny pilot. I have used this belkin usb to type c adapter as my mac does not support usb port. The problem I am having is I can see the display but cannot seem to use my mouse or keyboard. I tried this with my other ...

Hello, I have running piKVM on FriendlyARM NanoPi NEO Plus2 with USB to HDMI capture card 534d:2109 MacroSilicon USB Video OTG USB-A to USB-A cable running on Linux nanopineoplus2 6.1.77-legacy-sunxi64 #2 SMP Fri Feb 23 08:12:53 UTC 2024 aarch64 GN...

Hi there. So i own one tiny pilot with the pro licence, that i used to hold a chair in a company. I haven't been away for more than a week to do a hard test in it's strength; That said i have 2 questions, and please be frank haha; 1 - what are the od...

My job requires me to stay in California while I work from home. I connect the TinyPilot to my work laptop (which is the target PC) from June to Aug 10th, and accessed it using my personal laptop. My work laptop stayed at my home located in CA, and m...

I have set up the TinyPilot and it is mostly fine (though I put the video output through a splitter and it doesn't seem powerful enough to appear on TinyPilot. However, It is ok if I eliminate the splitter, and hopefully an amplifier will fix this.) ...

I am able to log on via .local on network but over IP that is not the case it just comes up as disconnected. Any way to solve?

is there a way to remove that banner, and any tinypilot identifying information, or not?

I'm trying to install the software on a brand-new configured Raspberry Pi 4 with: curl \ --silent \ --show-error \ https://raw.githubusercontent.com/tiny-pilot/tinypilot/master/get-tinypilot.sh | \ bash - && \ sudo reboot ...but I get th...

Hello, I've submitted a support ticket regarding an issue with my TinyPilot setup. Here are the details: I'm utilizing TinyPilot to facilitate remote access for an individual located in India. TinyPilot Details: Location: USA Connected to MacBook Pro...

Hello, I am getting this even after multiple restart. Can you please help?

system->hostname option is missing from tinypilot web interface. I purchased recently on device to test and after upgrading to version 2.6.3 hostname option has disappeared. I need to put ~200 tinypilot devices in my datacenter without name change op...

I use Veeam Windows/Linux Agent to backup my client machines. If I ever need to do a restore, step 1 is to boot from the VeeamRecovery.iso (which would be loaded via TinyPilot). Step 2 would be to tell Veeam Recovery to grab my backups from a network...

I have an ancient server I am having issue with. Tinypilot boots at 640x480, but then once it boots into an OS the display gets corrupted. I tried the EDID fix, but to no avail. Trying to recover a system that is having issues but cannot get in. http...

I read various posts and news announcements over the past week about it—in case anyone hasn't heard—here's the "main" post by the creator of TinyPilot about the sale. Just wondering what this means for us TinyPilot owners (I just bought mine a month ...

Tinypilot is failing to stream h.264. Keeps disconnecting on MJPEG It is stuck frozen on MJPEG

Im trying to get connect to tinypilot.local I’m unable to get access. Please provide me some tips

Hi Guys, I have connected my Tiny to an Intel NUC which has Ubuntu 22.04 installed. I can access and use Ubuntu without problems but if I lock desktop, when I put my password the keyboard distribution is not OK. For instance "_" character is on "?" i...

Since there seems to be a lot of questions here where the answer is "I sounds like you have a corrupted OS," is there a way to save the configuration so it can be restored later?

dear group, i bought tinypilot pro, in order to control my two nvrs in server room( ground floor) from my office ( first floor ) via our local lan . i bought all hardware mentioned in the video View on YouTube as of now i cannot use mouse movements o...

Hello I just re-imaged my tinypilot as it was not accessible. I renamed it hostname as previous one (tinypilot-1) which was the name I had prior to it stopped working The reimaginghas been done perfectly However it is accessible via tinypilot.local b...

I'm preparing a TinyKVM and am working on uploading the images that we think we'll need in the first 90 days locally from my desk. Some of these images are 10-16GB (we're using a 128GB USB Flash Drive instead of the microSD). I made the mistake today...

When I use TP on my local network the video is perfect and looks exactly like the screen on the laptop I have connected. When I go away from home, I use TailScale, and the video quality goes down. What solution gives the absolute best experience as i...

for instance sysupgrade -c -k -b /tmp/tinypilot.tar.gz doesn't work, there is no package installed for sysupgrade, how do I back it up other than yanking out the sd card and creating a copy via GUI? Thanks

Mac OS Sonoma 14.3 Chrome Version 124.0.6367.91 (Official Build) (arm64) I tried deleting and re-adding without any change. Howdy! I have a new TinyPilot Pro I'm configuring. When I follow the FAQ entry for installing the cert, I get the following er...

Hi there. Second TinyPilot I purchased couple of weeks ago is not working, I can't access web interface. I have changed host name on my first TinyPilot (both are on the same network). Rebooted both. I verified hostname for 1st TP has changed (alpha, ...

Hi there, I've been using the TinyPilot Voyager 2a for two weeks without any problems. However, after shutting it down last Friday, it's not working properly upon restarting on Monday. While SSH access is fine, the web interface shows that TinyPilot ...

It is certain I am doing something wrong. I downloaded the Windows 10 Media Creation Tool. Created an ISO, uploaded and mounted it to install on a machine. The machine boots from the virtual mounted media (USB or CD-ROM do not seem to matter). Howeve...

Hello. I just recently added a TinyPilot to a server to be able to send commands directly after reboot. This particular system has a finicky RAID controller and occasionally it'll need user interaction to continue to boot. Unfortunately, I'm in the s...

Hello, Windows 11 based installations can't see USB Storage, so installation from Virtual Media is not possible. Is there any workaround ? Thanks.

Hi Guys, I'm using an RPi4 with a USB HDMI capture card. Every time I reboot the RPi4, the screen cannot capture the target machine, and it only shows the color bar display. To resolve this, I need to reboot my target machine before it will display t...

Trying to load windows 11 iso in virtual media set in Flash mode. Shows up ad USB CDROM: When I try to to boot to it I get this:

I connected my tiny pilot and for my targeted computer to my personal computer and when I try to use the computer from my personal computer I see two cursor moving I click on desire tab and it get click on another tab that I do not want

When shutting down the TinyPilot itself (Voyager2a PoE), I notice the fans stay on and spinning eternally. How do I know when it's safe to unplug the unit? I have already corrupted my SDcard once apparently from disconnecting too early. Is there any ...

Hi, I am getting white screen. https://logs.tinypilotkvm.com/yc0VrUEL

After receiving the TinyPilot 2a got it installed and all worked perfectly. I removed the existing monitor, keyboard and mouse and replaced with the cables connecting to the TinyPilot. Again it worked perfectly. I am using the HDMI to VGA purchased w...

Hi, I'm trying to update my Voyager 1 and it keeps failing with the following message: The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2. After my first attempt of installing the update but fail...

Hey, I just got a new TinyPilot and am attempting to use it with a new micro USB cable. At first it did nothing, then I realized if I apply pressure a certain direction on the micro USB power socket, the LED comes on. if pressure (even gravity) is ap...

Good afternoon! My company purchased a TinyPilot for testing. We are looking at deploying these to machines in our customer's production environments. (Minimum of 2 TinyPilots per site, hundreds of sites) I would like to have the option for the USB v...