TinyPilot

I am trying to access keyboard from mac to another machine. Unable to access the keyboard of the target machine.

I'm thinking of using this device for my work to access our DVR over the local network. If I connect to the DVR's web interface over the DVR's IP, the amount of video streams being sent results in laggy video feeds. With "local" viewing via a TinyPil...

I only got power adapter and tiny pilot device and a cable. I don’t know how to connect to share the other laptop screen. Do I have to buy any additional cables ?

When we use the tinypilot with the VGA adapter, we get "NO SIGNAL" when the computer power up or reboots. However, if we boot up with a normal monitor on the VGA port of the computer and then switch to tinypilot (with VGA adapter) we get a display. O...

I was able to get my TinyPilot setup and controlling a traditional midtower Win 10 PC but when I use a Beelink Win 11 minipc I can see video and control the mouse remotely but I am unable to use remote keyboard strokes or even the clickable keyboard ...

Strange problem. I bring up tinypilot and it shows the initial screen but it seems like keyboard strokes are not passed to tinypilot. Video is working fine. There is a message that shows a red disconnected status but again, the video works fine and w...

Hello! I’ve tried using the tinypilot web UI on my iPad and iPhone and found out that I can’t seem to be able to click; tapping the screen video only moves the cursor. Is there a way to enable touch support? If not, is it a planned feature? Thank you!

Is it possible to have a local monitor and keyboard (via usb) on the Voyager 2? I want to be able to connect a monitor to the unit along with a keyboard while still being able to get to it via network for control?

Hello, Has anyone successfully sent a keystroke using the community api? I want to write an ansible playbook on a cron job to call the api and send a keystroke to keep the end device from locking Currently I downloaded Burp and am seeing the http his...

I have the TinyPilot Voyager 2 POE. Unable to access using Web Browser. Tried using: https://tinypilot/ https://tinypilot.local/ https://tinypilot.localdomain/ also the DHCP assigned IP

Hi, trying to use this in a non standard setup I would assume. I have my Raspberry Pi connected to a KVM switch I have. The video is being shown, but no keystrokes go through. I can take a picture of the connector if you want, but my assumption was t...

Hey, I have a Voyager 2 PoE, that I purchased a month ago (5/17/22). I have been using it, and its been working very well. I always use the web UI to shut down the unit before i unplug PoE and relocate the Voyager 2 to a new location. about 2 weeks a...

Hello. I love your project to control my home mac. I bought your power splitter to give more power to pi, but raspberrypi doesn't boot completely. In raspberrypi there light only green but not red. I found that that light means there is not enought p...

Log file here: https://logs.tinypilotkvm.com/kR7G9w8i Error 502 on new install tinypilot [error] 394#394: *1 connect() failed (111: Connection refused) while connecting to upstream ... File "/opt/tinypilot/venv/lib/python3.9/site-packages/dns/rdtypes...

I bought Tinypilot for more than 1 month now, I tried everything including enabling H264. I don't see any issue when the stream from the tiny pilot(remote computer ) to my computer, I played video on the remote computer, and I could compare 99% perfe...

I have tried to connect a cheap KVM switch (brand: PWAY) with hotkeys with TinyPilot together. The TinyPilot could not start up if the KVM Switch with HDMI signal (PC running). Then, unplug the KVM switch and it will boot up immediately. After the ne...

I'm curious what PoE HAT will be used in the Voyager 2 option coming in January? I know I won't likely be able to upgrade the one that i just ordered, but still very curious...

i have a tinypilot, it used to work fine with a vga converter, now the vga doesn't work and hdmi looks bad.

Thank you for the tiny pilot, I purchased it but the web interface link you sent me does not work. Also how can i get it to connect if I am in another country. My primary reason for buying it was to set it up on a laptop in the US and access it from ...

Hi! I am having some trouble when mounting virtual media on Lenovo Thinkcentre M70q computers with the Voyager 2 When I mount an ISO file (both in flash and CD-ROM modes), the video freezes, and it seems to me (but it is hard to confirm because of th...

Hello, My name is Jacob. We were sent a KVM to test so we can try and sell it on our website 42U.com I set up a username and a password and for some reason it will not let me log in. However I do not have the order number to download the voyager2 SD ...

When I connect a pc with the VGA to HDMI I get "NO SIGNAL". It works for the same PC on the HDMI port. https://logs.tinypilotkvm.com/GY6EACMX The VGA to HDMI works with a different monitor. I tried 3 different brands of HDMI cables. The VGA to HDMI a...

I've been unable to get keyboard and mouse working when connecting to a Debian PC. The dmesg output from the PC is below and seems to indicate an issue with addressing. Any help would be appreciated

Hi, I attempted to install H264 but got a message in terminal that connection to the network was unexpectedly terminated. And I did not get a "done" message after some libraries were being installed. How can I check whether H264 was installed?

Thanks in Advance. We are planning on deploying The Tiny Pilot to several clients who may not be tech savvy. If they were to mistakenly plug the power into the data port of the device, would this ruin the device, or does the device have protection to...

https://logs.tinypilotkvm.com/TejfFamD I've tried different USB to HDMI adapters as well as reducing the resolution on the desktop. I don't get Video Out. :/

I am just curious how that would work, given the instructions say: With your TinyPilot booted, you can now access the TinyPilot web interface from any device on your local network by visiting one of the following URLs: https://tinypilot/ https://tin...

Hi, for some reason my tinypilot ( latest version POE ) becomes very laggy after being in use for around 1h. In order to fix it I need to turn it off( removing AC and Network cable [I have both connected]. Initially I only had it connected to the POE...

I discovered the Wake on Lan feature after reading this thread: can't wake computer using mouse/keyboard I followed the instructions, but WoL isn't allowing me to wake or turn on my target computer. Also, when I physically push the power button to po...

I'm just setting up my TinyPilot. I can see my target MacBook's screen in the web interface. But I can't control it from the web interface. On my target computer, I made sure mirror mode was turned off, and that the TP was set as the Main Display in ...

In the UI, it shows error: The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 128. In SSH, when I run this command, I get this error: pilot@tinypilot:~/ngrok $ sudo /opt/tinypilot-privileged/update...

Hello everyone I've just go the voyager 2 device and I'm trying to get to the web interface. IPs in our network are mac-based. devices do not get an IP unless DHCP knows their MAC address. How can I get the MAC address of the tinypilot? Thank you

It sounds like this might be the same issue mentioned in this thread, but I'm not sure: can't connect Here's what I've done so far: Plugged ethernet into TP. The ethernet port currently has a flashing green light on the left, and a solid orange light...

I've had the tiny pilot for several months. This morning I noticed a grinding noise which turned out to be the TinyPilot. Is this covered by warranty? if not, are there specs for the fan that I can order a replacement?

hello. so i bought this kvm because it looked cool and i need to access my home desktop at work sometimes. but i have a problem, how can i access it at work without setting up a vpn? because my work computer is always on a diffrent vpn(maybe whitelis...

Hello, I just received a tinypilot voyager v2 and am having difficulties. Followed the instructions, but can't get the video signal to work. See screenshot. I double-checked the cable and confirmed that it works properly using a regular monitor. Woul...

I'm running 2.4.1 (with h.264 enabled) and have noticed since upgrading that selecting "Log Out" from the TinyPilot System Menu, it does nothing (ie doesn't log out). Is this isolated to me or is it happening to others?

I just made a dmesg to verify my undervoltage problem was gone (it is) and found this in the logs.. no clue what it means / if its a problem: [1399846.223492] ------------[ cut here ]------------ [1399846.223721] WARNING: CPU: 0 PID: 11 at drivers/me...

Hello I cannot find any documentation to update the keyboard layout to "azerty". Thank you for your help, Emeric

Good morning @michael! I’ve had great success and a lot of use out of the Tiny Pilot for a few weeks now. Unfortunately, when I went to log on to my tiny pilot via the web URL (IP address or host name - ssh is fine) I couldn’t connect to the web serv...