TinyPilot

Just did a fresh install. I see video but no response for keyboard and mouse. I'm also seeing an undervoltage even though I'm using the Tinypilot data splitter. In addition, the video disappears frequently. I assume that is due to the undervoltage as...

Hello, We got this error after rebooting our TinyPilot following a power failure: "module 'yaml' has no attribute 'safe_load'"?! What's the problem exactly? Thanks

What is the Return Policy for the Voyager 2a? We sent an email to the TinyPilot Support email on April 17 but we haven't heard anything back. Thanks!

I purchased my TinyPilot hobbyist kit back in January and finally got around to setting it up today. I hooked everything up per the assembly instructions, however it doesn't seem to be getting an IP address via DHCP, as I can't access it via the tiny...

Hey all. I'm experiencing this error when trying to update: Error: [Errno 28] No space left on device. I've been using the device in a very basic mode and haven't installed or configured anything extra. It typically runs 100% of the time with no rebo...

I have just installed tinypilot. It i visible on the router, but I can't connect via https://tinypilot.local or https://tinypilot If there is no way to connect to it, then I can't begin to troubleshoot

Can I use multiple laptops with one Tinypilot?

Getting this message when attempting to update from 2.5.0 to 2.5.4 The update failed: Command '['sudo', '/opt/tinypilot-privileged/update']' returned non-zero exit status 2. Seen the workaround but that involves things that are beyond my ability. Wil...

Hello, I am not able to factory reset my tinypilot device. when i upload the image i get the message. Error something went wrong. if it is a compressed image, please check that the archive is not corrupted. User did not grant permission while transfe...

i have a Yubikey that I need to use to bring up Citrix on my laptop. I have TinyPilot connected with tailscale installed. Is there a way to redirect the Yubikey on my personal laptop through tailscale/tiny pilot so that I can authenticate into Citrix...

Hello, I am using a RP4 with RaspiOS Bullseye lite (32-bit). For some unknown reason I am not able to create a HID device anymore (see error log). Report URL: http://logs.tinypilotkvm.com/smCpdSP1 Any idea what could be the reason for that? I flashed...

Hello, I am thinking about using this software to control the mouse and keyboard: https://fleetstack.io/blog/how-to-setup-a-raspberry-pi-as-a-usb-over-ip-server-a-comprehensive-guide I want to use 2 pikvms on my desktop w/ two LCDs. I tried to disabl...

Hello, I have had on/off issues with my tinypilot, most recently addresed here: Restarted Tiny Pilot - status light amber and cannot connect Currently I am unable to connect to my tinypilot through 2/3 of the links, with https://tinypilot and https:/...

After moving my trackpad one 1/8" the mouse on the KVM moves across the whole screen making it unusable.

Hi, I have a company computer which I connect to the tinypilot device. Once I enter the usb cable the mouse starts working and I see in the device manager that a mouse is connected. However, after a few seconds the connection is lost and I can no lon...

I have a TinyPilot Voyager 2. About a year and a half old. I have not used it in a long time but was getting it prepped to the start using again. I powered it up and I can ping it and SSH to it (can't login for some reason), but can't browse the ip o...

I have one TinyPilot Pro but two microSD cards (I like to have a backup). Only problem is when I boot using the 2nd one to perform routine updates, I get certificate warnings and as a result when the update completes I never know because the page doe...

I have a tinypilot device connected to a PC overseas via tailscale currently. I'd like to have another tinypilot + PC in that same place overseas. If I purchase another tinypilot, can I have someone at that place set it up for me. Or does the initial...

Hello, So I have been using tinypilot pro version for a while now and everything has been working well till today. Today tinypilot's cursor doesn't work anymore on full screen mode and I have been left with original computer's mouse cursor which is l...

Frustrating little device. Can't seem to get the video working. Hard to believe it doesn't support the most popular resolution 1920x1080 @ 60Hz. Tried the supported rate of 1280x720 @ 60Hz and still no joy. HP ProDesk 600 G3 Desktop Mini Windows 10 P...

Hey, I installed Tinypilot on my raspberry pi 4 B. I am getting the HDMI display on the hostname but I can't use Mouse and keyboard even when I am using a USB-c to USB-a connection. Can someone please help me figure out what the problem might be?

Can i use tinypiolet to connect my brothers pc thats in usa and i have a tiny piolet with me in india.

I've been using the tinypilot voyager 2 for nearly 1.5 years now. I'm using tailscale to access the KVM from overseas. For the last 2 months a new issue has arisen. My mouse input occasionally experiences lag spikes between 2-30 seconds, mostly on th...

Hello, I am building a TinyPilot and would like to upgrade to Pro. I have installed the free diy version but wanted it to be secure. Please help troubleshoot manually upgrading, as after executing the curl command, the upgrade process fails. I have t...

I just got a TinyPilot and it worked quite well out of the box, for simple setups it is actually plug and play. I have the following problem. I have a setup with 1 PC that is connected to 4 screens with a resolution of 3840x1080 each. All screens are...

With the latest Edge browser, when I try to login to my Tinypilot, using my personal profile in Edge, it seems to force Edge to open a work profile, instead of just logging in. This is a very odd behavior because the work profile selected is not the ...

Hello im new to tiny piloot. Looking to work remote. Bought a tiny pillot, installed it. It seems to work. 1.Lag seems to be more than 200 ms. 2. im not an engineer, im a designer, so working with design soft i use alot of keyboard shortcuts and thos...

Aside from network, is the TinyPilo video latency primarily a product of the Pi CPU limits or protocol/software?

Hello, I am using Raspberry PI Zero and Raspberry Pi OS Lite (version from October 10th 2023). When I run this script from the repo curl \ --silent \ --show-error \ https://raw.githubusercontent.com/tiny-pilot/tinypilot/master/get-tinypilot.sh ...

Hi I’m trying to set my tiny pilot but it says that my host can only be accessed from a local device? How can access it from device that’s not on my local network. Thank you

I am using a TinyPilot Voyager 2a to remote into my windows laptop. I have a perfectly good tinypilot setup working already, but am now having issues with a second setup that I finished yesterday. I put everything together and all was working well. T...

I plugged two tiny pilots into a remote workstation that has two video cards. I was able to see two each of the tiny pilots but can only use the mouse on the primary tiny pilot. In order for this two work it word require the following: 1)plug the USB...

I have been experiencing issues with my Voyager 2a. Specifically, the cursor and all UI elements are "jittery," and the audio view browser is no longer working. When attempting to update the device, I get an error that the disk is full. I am only abl...

I need remote access to the KVM when outside of my own network and I don't want to open any inbound connection ports on my firewall. I would like to install the zerotier agent on the KVM. If I am not mistaken TinyPilot allows SSH access to the RPi OS...

Hi there! I purchased the Voyager 2a and followed the following instructions: https://tinypilotkvm.com/instructions/voyager2a/v1 It's not really rocket science. I plugged in the power adaptor to the wall and plugged the USB-C side of the power adapte...

I have a tinypilot in a private network where I can run DHCP but not DNS services and cannot route with NAT. Each device gets a unique IPv4 address and I can ssh in to the tinypilot (having set it up in a different network). I have the dreaded 502 Ba...

TinyPilot is fantastic and we could use it for medical assistance in remote areas. But for a certain device which I want to take over, there is an horizontal offset of the mouse cursor. The screen is projected but with black vertical bars on the side...