TinyPilot

So on youtube there is a Theatre mode where it kind of goes fullscreen... I am mentioning this because I have G9 Monitor which is 5120x1440 resolution. I would like to Fullscreen TinyPilot at half of the screen the screen resolution but thats not an ...

I have an idea for being able to use 4K at 60fps if you have a high end capture card. Suppose we have 3 computers and a capture card that supports 4K @ 60FPS 1 Windows computer 1 Mac computer 1 RaspberryPi Proposed TinyPilot Configuration The Raspber...

I have tinypilot working somewhat, however the display constantly flashes no signal every 2 seconds or so. Can anyone tell me what is going on? Log link: https://logs.tinypilotkvm.com/pkOPl3qW I have this connected to the vga port of a Dell R430 serv...

TinyPilot worked well when I am using macOS Ventura 13.1, but it shows black screen after upgrading to macOS Ventura 13.3. Keyboard and mouse works, but HDMI output is just a black screen. It was same whether or not I select MJPEG or H264 mode. I tri...

Right now, my tinypilot is in USA, and I am connecting my computer to it from another country. If someone moves the tinypilot to a different location for me in USA, will my computer still be able to connect?

I have a tinypilot that has been working great for a few months but recently stopped. We're unable to connect to it via any of the 3 listed urls. I've read most of the other posts on here about what to try. Here's what I've found: We can see the tiny...

I am using the TinyPilot solution in remote areas without wifi/ethernet but with adequate 4/5G coverage. I create a wi-fi hotspot with my phone to connect the TinyPilot which I control remotely using Tailscale. Has anyone tried to directly insert a S...

So I have a tinypilot setup and I feel like the quality settings do nothing. Switching from Mjpeg to H264 doens't change anything, and both of them look the exact same even at the lowest possible quality setting. I get around 2 seconds latency. I did...

I upgraded to tinypilot pro 2.6.1. The screen size is getting small when I switch to another PC ( I connected TinyPilot to HDMI 2-ports splitter with Mac-mini and NUC). When I use MJPEG, there is no problem in screen size. But If I use H.264, The scr...

When logging to Tiny Pilot the latency is disturbing. Also, it seems I can't use the mouse button to click on options while in BIOS mode.

Hello Recently, I was trying to update video settings to improve the remote control speed. It worked initially and I tried multiple video settings update for almost 1 month But right now, the video isn't rendering anymore and couldn't touch video set...

Hi, I was using tiny pilot from couple months but from today I am getting error on left side of the screen that it is disconnected, and I cannot click on any buttons with my computer. What is the solution of this problem.

Hi, I couldn't find this in the docs, apologies if I missed something. TinyPilot looks great but can you please answer a few security questions: Is there any cloud connectivity or transfer initiated by the TinyPilot box? i.e. what is the back door ri...

Touch events don't work on my Iphone mobile browser. Also audio output functionality is missing for Mac Pro models.

Hi I have a TinyPilot Voyager 2 PoE puchased Oct 19, 2022 ORDER #4527. Starting today we have no lights on network and the unit is unreachable. We have checked cables, nettwork config and have isolated the issue down to the unit itself. Please advise...

Good Evening! I was originally brought here via the now deprecated project known as Key MIME Pi. USE CASE: I am using daisy chained USB Synchronizers where, at a hardware level, all they do is repeat my keyboard input. Generally speaking, I use these...

Our Tinypilot KVM ethernet port died less than a week after receiving it. Tested on 4 switches and 3 different cables. What do we do?

Hello, we have an environment where all of the IP addresses on our networks have to be static. I'm readying two Tiny Pilots to send to a remote location, and they need to have the IPs set for the network where they will live (no DNS). Everything is s...

Hello! I bought a device recently and generally I'm happy, but there are some limitations which webview is having. Say, I cannot use Alt-Tab to switch apps. I cannot really open it in fullscreen (it says "to return press Esc" and of course while I'm ...

I've recently updated my tinypilot with factory reset. But it's unable to transmit audio on mac. What should I do?

Can I connect to the TP with some native VNC client like this https://www.realvnc.com/en/connect/download/viewer/ , and if not - why?

Hello, I am not interested in audio capture but am interested in modifying the EDID. Can I do that with the older model? Also, besides audio capture and case differences what does the 2a have that the 2 doesn't ? Thanks,

Hi, I am using HDMI to HDMI cable. My video quality is poor then target laptop to personal laptop. How can I improve high resolution video using via HDMI?

Let me start by saying that I've run through most of the previous forum entries on the No Signal issue. I've created a shareable link of logs. https://logs.tinypilotkvm.com/2E7NjSo3 I'm also attaching build details. This is the TinyPilot Hobbyist ver...

My WebUI is was returning: "{"code":null,"message":"The database file is not compatible with the current version of the app."}" I did a re-install with: curl -L https://tinypilotkvm.com/[redacted]/install.sh | sh && sudo reboot `` Now the when tryin...

Hello sir I am very new to the KVM space. Looking for suggestions. My requirement is below: I have a mac book pro and a HP windows laptop with a wireless mouse and keyboard in usa. HP windows laptop hosts a zoom call and share screen and grants contr...

I purchased a VGA to HDMI adapter along with my Tinypilot Voyager 2A. I am to get an HDMI machine to stream audio ok but if I use a machine with the VGA to HDMI adapter it doesn’t work most of the time. On a few occasions, it plays audio out of the b...

Background: I use tinypilot to control 4 computers remotely. I have been doing this from my office, which is in a different room from the computers, as well as to use TailScale to remote in while away from home. I have been using this setup on my PC ...

I need to install a driver for a wifi adapter on the host computer that currently has no internet source. Is it possible to download the driver onto the tinyp and then get it to the host and installed through the tinyp? Or do I just need to connect t...

Hello, I just renewed my Tinypilot pro license so that I can reimage the raspberry pi but I am still getting this error when I try to update. "Error: Failed to request latest available version: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certific...

TinyPilot is awesome. We need it. But there are some shortcomings that will, I hope, be resolved eventually. Use case - I have 2 kids and I have to do things as a dad, yet I have to work. Tinypilot allows me to access my work computers from my Micros...

TinyPilot v2 screen flickering on macos? how to fix this. i have old of them v1 working fine

Was working properly untill yesterday, suddenly the UI went down. Please help

I've got my Tinypilot Voyager last december via punkt.de. In my logs I now get messages about Under-Voltage. How is this possible? I'm using exactly the components that where shipped.. [ 6.875685] Under-voltage detected! (0x00050005) [ 27.673651...

Hi, I'm trying to update my Tinypilot pro from 2.5.0 to the latest version. I tried two times through the web interface and just got an error, so I tried again through ssh. Upgrading stops in the ansible step: TASK [ansible-role-ustreamer : check if...

Being able to set a static IP address or switch to DHCP via TinyPilot's web browser UI. Can't believe this was not thought of. I know it can be done via command line but, come on guys, how hard would it be to add it to the UI? TinyPilot's inability t...

Hi, I just purchased the TinyPiloy Voyager 2a (non-PoE version) and I want to somehow use it with my 4-port Tesmart KVM switch so I can have KVM access to multiple PCs that are connected to the Tesmart KVM. I read a few posts on how this can be done ...

Hi, I just upgraded to 2.6.0 and now I'm having video issues that I wasn't before. It was working like 2 versions back (2.5.0?) and I had some issues going to the next level (2.5.5) so I went ahead and moved to 2.6.0 by doing a new 2.6.0 flash. Now t...