TinyPilot

How do we return the unit which is not working at all?

I bought a new tiny pilot. I am unable to connect to my target laptop using my another personal laptop. I tried to access all the url's provided in the instructions. But still I am unable to connect. Can you help me provide os settings for sd card pr...

Hi Im looking for a solution to control the local computer and also from the web browser. Has any one tried something similar? Computer -> hdmi splitter 1. Tiny pilot 2. Local monitor And how about using DisplayPort?

Hello, After reimaging the tiny pilot, turning on ssh, and ssh'ing into the device I try to run curl -fsSL https://tailscale.com/install.sh | sh && \ sudo tailscale up and get curl: (6) Could not resolve host: tailscale.com -bash: : command not found...

Hello - I have a Voyager 2a TinyPilot. While trying to access it this morning, I received a 502 Error: "TinyPilot is Not Running." I tried Solution 1: "Restart the TinyPilot service" and Solution 2: "Restart your TinyPilot" without luck. I have not t...

Hello, I have a Voyager 2a running Tinypilot version 2.6.3 that is giving me the "TinyPilot is not Running" browser page. My logfile upload can be found at https://logs.tinypilotkvm.com/Bh2nJXvX I set up this device at my home office last week, and i...

Hi. Once I login to tinypilot I'm getting {"code":null,"message":"expected '', but found ''\n in "/home/tinypilot/settings.yml", line 6, column 7"} Can you please help?

I have a laptop with no HDMI or other dedicated video. Is there any way to use a TinyPilot without a dock?

New Tinypilot device is extremely Slow though internet is stable. each click is taking 10 secound.

My tinypilot 2's data port is no longer working. I have tried everything I could think of. I switched wires to wires that work on my other tinypilots (I have 3 others). Cross tested the laptops with the other tinypilots and they seem to work. The vid...

Hi all, I’m trying to access my MEBx (vpro/amt) setup during boot via ctrl+p using the tinypilot web ui but the key sequence is not recognized. Any ideas how to perform ctrl+p during bios post? I tried also the web app thing using safari and chrome b...

Hi, I lose connection to the GUI every time the host goes to sleep or if I trigger a reboot. Here is my setup: TESmart 8 Port HDMI KVM Switch 4K 6 linux hosts Windows Mac LOGS: https://logs.tinypilotkvm.com/zC8sNaMs I observe the same behavior across...

I got my first tinykvm and I am excited about it. This will come in very handy. However, I've had it on power on on my network for about 15 minutes and I still can't find it. The LEDs on the network port are lit. The power LED is solid red and the di...

The tiny pilot is connected and it registers on my computer in the setting with a mouse and keyboard. However the ethernet connection side, i only see a yellow light, not a green as well. I am not seeing a green light by the ethernet connection. My i...

I think this topic is somewhere in here but yes I'm having this issue of No Signal the keyboard and mouse works my system specs are the following: Alienware Aurora R15 Here are my logs https://logs.tinypilotkvm.com/wRRSB8SL

Hello, I read https://tinypilotkvm.com/faq/own-tls-key/ but didn't find my answer there. I have a Voyager 2a with v2.6.3 and am using it with Tailscale for anywhere access. All working great! I use macOS. I'd like to avoid the big red Chrome warning ...

I bought one of those in the past, and I would like another one for an additional Pi. Are those still available? If not, I'll have to use a USB C to Go splitter and USB power blocker. Thanks in advance.

Hi, I'm using tinypilot remotely using tailscale and somehow internet is not working in tinypilot. I log in using ssh on tinypilot and tried to ping 8.8.8.8. but internet is not going. I can access tinypilot from local machine but not through tailscale.

I understand that TinyPilot currently does not have support for webcam nor audio. The digital nomad subreddit (r/digitalnomad) is 2m+ strong, and would love a solution where they can leave their hardware stat- side, while traveling abroad. It's much ...

I am getting this error after a factory reset, and attempt to change any setting in the webUI. I have my computer going directly to the tinypilot url, was trying to setup SSH at this point with no luck. If this happens justy refresh the browser windo...

Adding this because I didnt see this error and troubleshooting tips anywhere yet. If you get this error after you Take out all the connections from Tinypilot 2a Connect the Ethernet and then the Power Let it power up, 5 minutes later you see it conne...

Hi, after a year of usage all my tiny fans are getting so loud that i need to replace them. Which one is your recommendation? Better would be to get rid of them, no matter what. Any ideas what is needed?

My tinypiot network started not working. It worked before but now I cannot connect to tinypilot. I checked the IP address with IP scanner tool but I don't see tinypilot IP. I restarted several times but It didn't work.

Hi, First of all thank you for this great project. very helpful for my uses. i wondered is there an option for myself (not everyone) to solo update the version of ustreamer being used (noticed its 5.43) to a newer version. i saw there was a new relea...

This request would be first of its type. I want to the save the file to be Saved with just date and time. Example: "Screenshot_04012024_0825" and remove the appending of "TinyPilot" in the file name. Can you please point me to the code in the file wh...

I have three tinypilots. When I tried getting SSH access to make sure I can troubleshoot any problems from afar. It seemed to break all of them in different ways. Can you remote in and help? The reliability has really got me down especially with this...

I'm on French keyboard (AZERTY), so the pipe id done using the "AltGr + 6" keys but all i'm getting it a minus ("-") sign despite keyboard history show I'm using the "|" symbol. => This is also true for all symblols accessed via the Alt Gr key on a f...

Tried multiple time to get this device on line and I cannot see to get anything to display through the HDMI port. Any help is appreciated. Also walked the setup top to bottom multiple times and I cannot seem to get this refurbished unit to display an...

Good Morning, Just received my TinyPilot and was excited to use it with my phone. I have a samsung S10 and using a USB C to HDMI Multiport Adapter (https://www.amazon.com/Multiport-Tuwejia-Thumderbolt-Converter-Projection/dp/B07G44M4S3). Everything i...

Hi In my residence i cannot connect through the ethernet. I have only wifi connection option. What is the best best speed i can expect ?

Hi, So I am testing my Voyager 2 with the HDMI-VGA adapter on a Dell Optiplex 7010. I am unable to get video going at all. I have also tried various HDMI to VGA adapter cables and even a Displayport to HDMI cable I have (that I know works). The Optip...

I want to rename the Audio Device "Toshiba-H2C" to "Generic Audio" or something else not from Windows command 'mmsys.cpl' but in EDID HEX (I could only change the Display name to "LG Display") but audio device still shows "Toshiba-H2C", can you pleas...

Hi there, Having an issue with playing audio and streaming using H.264. I have been through the other tickets and appears that everything is working and the Janus server is up and running and active. Do I need port forwarding? I am trying to access i...

I am getting an error when I try to connect to meshnet using nordvpn with v2.6.3 pro, but on v2.6.2 it works fine. Can this issue be resolved in a future update, and/or can we be allowed to download previous versions of the image? Apologies if this i...

I received my TinyPilot this week. I am using it to control a Windows 10 ThinkPad laptop. Today is the first day I have used it for an extended persion. The fan is running often and fast enough for me to clearly hear it. Also, there is an electronic ...

I just installed my TinyPilot and have access to it on my network. However, I am not able to set the IP address as there is no "Network" tab in the menu. I am also unable to perform an update. I keep getting this error: Error: Failed to request lates...

HI, I need help. I can see the mouse moving on my Desktop that has the tinypilot connected to it but on my MacBook the movements are severely delayed. The delay is about 30-45 seconds for me to see what it has happening. Log is here : https://logs.ti...

I have my TinyPilot working here, but the font used for the text display when I boot my connected device to log in is small. Is there a way to get the TinyPilot to use a larger font?