TinyPilot

Hello, I have had on/off issues with my tinypilot, most recently addresed here: Restarted Tiny Pilot - status light amber and cannot connect Currently I am unable to connect to my tinypilot through 2/3 of the links, with https://tinypilot and https:/...

After moving my trackpad one 1/8" the mouse on the KVM moves across the whole screen making it unusable.

Hi, I have a company computer which I connect to the tinypilot device. Once I enter the usb cable the mouse starts working and I see in the device manager that a mouse is connected. However, after a few seconds the connection is lost and I can no lon...

I have a TinyPilot Voyager 2. About a year and a half old. I have not used it in a long time but was getting it prepped to the start using again. I powered it up and I can ping it and SSH to it (can't login for some reason), but can't browse the ip o...

I have one TinyPilot Pro but two microSD cards (I like to have a backup). Only problem is when I boot using the 2nd one to perform routine updates, I get certificate warnings and as a result when the update completes I never know because the page doe...

I have a tinypilot device connected to a PC overseas via tailscale currently. I'd like to have another tinypilot + PC in that same place overseas. If I purchase another tinypilot, can I have someone at that place set it up for me. Or does the initial...

Hello, So I have been using tinypilot pro version for a while now and everything has been working well till today. Today tinypilot's cursor doesn't work anymore on full screen mode and I have been left with original computer's mouse cursor which is l...

Frustrating little device. Can't seem to get the video working. Hard to believe it doesn't support the most popular resolution 1920x1080 @ 60Hz. Tried the supported rate of 1280x720 @ 60Hz and still no joy. HP ProDesk 600 G3 Desktop Mini Windows 10 P...

Hey, I installed Tinypilot on my raspberry pi 4 B. I am getting the HDMI display on the hostname but I can't use Mouse and keyboard even when I am using a USB-c to USB-a connection. Can someone please help me figure out what the problem might be?

Can i use tinypiolet to connect my brothers pc thats in usa and i have a tiny piolet with me in india.

I've been using the tinypilot voyager 2 for nearly 1.5 years now. I'm using tailscale to access the KVM from overseas. For the last 2 months a new issue has arisen. My mouse input occasionally experiences lag spikes between 2-30 seconds, mostly on th...

Hello, I am building a TinyPilot and would like to upgrade to Pro. I have installed the free diy version but wanted it to be secure. Please help troubleshoot manually upgrading, as after executing the curl command, the upgrade process fails. I have t...

I just got a TinyPilot and it worked quite well out of the box, for simple setups it is actually plug and play. I have the following problem. I have a setup with 1 PC that is connected to 4 screens with a resolution of 3840x1080 each. All screens are...

With the latest Edge browser, when I try to login to my Tinypilot, using my personal profile in Edge, it seems to force Edge to open a work profile, instead of just logging in. This is a very odd behavior because the work profile selected is not the ...

Hello im new to tiny piloot. Looking to work remote. Bought a tiny pillot, installed it. It seems to work. 1.Lag seems to be more than 200 ms. 2. im not an engineer, im a designer, so working with design soft i use alot of keyboard shortcuts and thos...

Aside from network, is the TinyPilo video latency primarily a product of the Pi CPU limits or protocol/software?

Hello, I am using Raspberry PI Zero and Raspberry Pi OS Lite (version from October 10th 2023). When I run this script from the repo curl \ --silent \ --show-error \ https://raw.githubusercontent.com/tiny-pilot/tinypilot/master/get-tinypilot.sh ...

Hi I’m trying to set my tiny pilot but it says that my host can only be accessed from a local device? How can access it from device that’s not on my local network. Thank you

I am using a TinyPilot Voyager 2a to remote into my windows laptop. I have a perfectly good tinypilot setup working already, but am now having issues with a second setup that I finished yesterday. I put everything together and all was working well. T...

I plugged two tiny pilots into a remote workstation that has two video cards. I was able to see two each of the tiny pilots but can only use the mouse on the primary tiny pilot. In order for this two work it word require the following: 1)plug the USB...

I have been experiencing issues with my Voyager 2a. Specifically, the cursor and all UI elements are "jittery," and the audio view browser is no longer working. When attempting to update the device, I get an error that the disk is full. I am only abl...

I need remote access to the KVM when outside of my own network and I don't want to open any inbound connection ports on my firewall. I would like to install the zerotier agent on the KVM. If I am not mistaken TinyPilot allows SSH access to the RPi OS...

Hello, I've installed the community/free version of TinyPilot. I noticed that I am unable to obtain video output from my Intel NUC that I have attached a HDMI cord from the Pi, and then with a dongle (usb > hdmi > to the Pi. Both do not present any v...

Hi there! I purchased the Voyager 2a and followed the following instructions: https://tinypilotkvm.com/instructions/voyager2a/v1 It's not really rocket science. I plugged in the power adaptor to the wall and plugged the USB-C side of the power adapte...

I have a tinypilot in a private network where I can run DHCP but not DNS services and cannot route with NAT. Each device gets a unique IPv4 address and I can ssh in to the tinypilot (having set it up in a different network). I have the dreaded 502 Ba...

TinyPilot is fantastic and we could use it for medical assistance in remote areas. But for a certain device which I want to take over, there is an horizontal offset of the mouse cursor. The screen is projected but with black vertical bars on the side...

My host device is an Intel NUC NUC7i3BNH. I've installed Windows Server 2022 on it. TinyPilot works fine to show me video of the NUC booting (I can see Intel NUC logo and F-key prompts) and the Windows login screen. This functions fine and as expecte...

My tiny pilot has stopped working, Video capture not working, boots up intermittently, fan sounds underpowered. Will a standard USB-C supply work as a replacement or for testing?

Hi team! I am able to see the screen, but can't control the device with tinypilot. Here's the tinypilot log: https://logs.tinypilotkvm.com/jZ5Aonnn Please support me. Thank you

This might be more of a question for Tailscale but I successfully installed Tailscale using the instructions on TinyPilot. I got the URL and authenticated via Tailscape login. Only issue is I didn’t realize that I need it to be authenticated to a dif...

I have followed: https://tinypilotkvm.com/faq/factory-reset to write the image to a new, larger SDCard. I want to have a copy of an iso on the SDCard to use to image the machine the tiny pilot is connected to. My SDCard is larger than needed (512GB),...

I see a menu option System:Virtual Media It allows mounting from my desktop or a url. Is there a way to mount an image from the sdcard in tinypilot (preferred) or from the USB port in tinypilot?

So on youtube there is a Theatre mode where it kind of goes fullscreen... I am mentioning this because I have G9 Monitor which is 5120x1440 resolution. I would like to Fullscreen TinyPilot at half of the screen the screen resolution but thats not an ...

I have an idea for being able to use 4K at 60fps if you have a high end capture card. Suppose we have 3 computers and a capture card that supports 4K @ 60FPS 1 Windows computer 1 Mac computer 1 RaspberryPi Proposed TinyPilot Configuration The Raspber...

I have tinypilot working somewhat, however the display constantly flashes no signal every 2 seconds or so. Can anyone tell me what is going on? Log link: https://logs.tinypilotkvm.com/pkOPl3qW I have this connected to the vga port of a Dell R430 serv...

TinyPilot worked well when I am using macOS Ventura 13.1, but it shows black screen after upgrading to macOS Ventura 13.3. Keyboard and mouse works, but HDMI output is just a black screen. It was same whether or not I select MJPEG or H264 mode. I tri...

Right now, my tinypilot is in USA, and I am connecting my computer to it from another country. If someone moves the tinypilot to a different location for me in USA, will my computer still be able to connect?

I have a tinypilot that has been working great for a few months but recently stopped. We're unable to connect to it via any of the 3 listed urls. I've read most of the other posts on here about what to try. Here's what I've found: We can see the tiny...

I am using the TinyPilot solution in remote areas without wifi/ethernet but with adequate 4/5G coverage. I create a wi-fi hotspot with my phone to connect the TinyPilot which I control remotely using Tailscale. Has anyone tried to directly insert a S...

So I have a tinypilot setup and I feel like the quality settings do nothing. Switching from Mjpeg to H264 doens't change anything, and both of them look the exact same even at the lowest possible quality setting. I get around 2 seconds latency. I did...